Powder Filling Machine

Auger Fillers for Protein, Pre-Workout and Supplement Powders — Semi-Automatic to Full Line

Semi-Automatic to Automatic
With or Without Built-In Weighing
10 g to 5 kg

Five auger fillers and a complete can line. Two questions decide which one you need: does every container have to hit its label weight, and can one operator keep up placing containers? Answer those and you’re down to one model.

Why Choose Our Powder Filling Machine?

Servo-Driven Augers

Servo-Driven Auger Control

Every model doses with a servo-driven auger. It stops at the same point every cycle and its speed is set on the screen — the base that everything else relies on.

Built-In Weighing on the B and E

Built-In Weighing on the B and E

Two of the five weigh every fill on a scale under the outlet and correct the auger for the next one. That’s how they hold label weight as the powder settles and changes density through a shift.

Dust Pickup at the Outlet

Dust Pickup at the Outlet

Powder that escapes at the filling point is pulled away rather than settling on the machine and the container. On the full line, the rim is blown off and the outside of the can brushed clean before capping and labeling.

Augers for Your Fill Range

Augers for Your Fill Range

The auger decides the fill range. Tell us your smallest and largest fill and we supply the augers to cover both — from 10 g sample packs to 5 kg tubs.

Two Questions Pick Your Model

1. Does every container have to hit its label weight?

An auger doses by volume. Powder settles and changes density, so the same volume weighs a little different through the shift. If spot checks on a separate scale are enough, you don’t need a built-in scale. If every tub has to be right, you do.

2. Can one operator keep up placing containers?

On the semi-automatic models, someone holds each container under the outlet. Once that person can’t keep up, you want an automatic model that feeds containers for you.

No built-in scale Built-in scale
Semi-automatic — operator places containers APK-GEF50A APK-GEF50B
Automatic, single head APK-GEF50C APK-GEF50E
Automatic, twin head APK-GEF50D —

Need scoop insertion, capping, sealing and labelling too? See the complete can line.

What These Machines Fill

Protein powder
Pre-workout and greens
Collagen and creatine
Drink mixes and meal replacements

Model comparison

Model Type Weighing Fill weight Speed Power
APK-GEF50A Semi-automatic None — volumetric 10–5,000 g 10–50/min 1.8 kW
APK-GEF50B Semi-automatic Built-in, corrects each fill 10–5,000 g 10–50/min 1.8 kW
APK-GEF50C Single-head automatic None — volumetric 1–500 g 25–45/min 2.2 kW
APK-GEF50D Twin-head automatic None — volumetric 10–5,000 g 25–60/min 3.5 kW
APK-GEF50E Single-head automatic, screw-conveyor fed Built-in, corrects each fill 10–2,000 g 20–40/min 3.0 kW
Send us your powder and your label weight

Those two tell us whether you need a scale. Your daily volume tells us whether you need automation. Send all three and we’ll tell you which model — including when the answer is the cheaper one.

Documentation & Selection Support

Verify our quality standards and simplify your procurement process with our official documentation.

Product Portfolio

Product Portfolio

Explore technical specs for our complete range of powder filling systems, from semi-automatic units to fully automated production lines.
Quality Assurance

Quality Assurance

CE Declaration of Conformity for the powder filling range. Material certificates available on request.
Technical Standards

Send Us a Sample

Post us your powder and we'll fill it on the machine you're considering, so you see the weight spread on your own product before you order.

FAQ Powder Filling Machine Frequently Asked Questions

What is the primary difference between a semi-automatic and an automatic powder filling machine?

Semi-automatic machines require manual placement of containers or pouches and are ideal for small-batch or pilot production. Automatic machines feed the containers for you, so one operator can look after the machine instead of placing every container. Single head or twin head depends on how many containers a minute you need.

Can they handle dusty or poorly flowing powders?

Yes. The augers are fed from agitated hoppers so the powder doesn’t bridge, and dust at the outlet is picked up rather than left on the machine. For very sticky powders, send us a sample first.

How accurate are they?

It depends on the model and your fill weight. The GEF50B holds ±0.5–1 g under 100 g, ±0.5–1% from 100 g to 1 kg, and ±0.25–0.5% above 1 kg. The GEF50D holds ±0.3–1%. The models with a built-in scale hold label weight more consistently through a shift.

Do these machines run on single-phase power?

 The GEF50B and GEF50D can be built for single-phase or three-phase power, and we confirm the voltage with your quote. Ask us about the other models.

What does a twin head give me?

Two containers fill at once, so the line runs faster without the auger turning faster. If one head keeps up with your volume, a single-head model costs less.

What are they made of?

Stainless steel, with SUS304 on the contact parts. Ask us if your product needs 316L.

How long does a changeover take?

A new fill weight is a screen setting. A new powder means cleaning the hopper and auger. A fill outside the auger’s range means changing the auger.

What kind of maintenance is required for the auger filling system?

Maintenance is straightforward. The design allows for quick disassembly of the hopper and auger screw, so the hopper and auger come apart for thorough cleaning between products.

Do you offer assistance for custom production line configurations?

Yes. Whether you need a standalone filler or a fully integrated “protein powder can filling line” our engineering team provides end-to-end consulting to tailor the hardware to your specific product density and packaging speed goals.

What support do we get after delivery?

Operating and maintenance manuals in English, a spare parts list with prices, and installation and training on site. Ask what’s included in your quote and what costs extra.

Send us your powder, your label weight and your volume

Label weight tells us whether you need a scale. Daily volume tells us whether you need automation. Your container tells us the rest. Send all three and we’ll tell you which model fits.

  • Direct from our factory
  • Lead time confirmed in your quote
  • Installation and training available
  • Spare parts listed in your quote
Scroll to Top