APK-GEF50C Single-Head Automatic Powder Filling Machine
Containers fed automatically, one auger filling head
One operator can only place so many tubs an hour. This machine takes the placing off their hands: containers arrive on their own, stop under the filling head, get filled and move on. One auger head, containers moved on a linear conveyor, and no built-in scale.
1. Speed: 25 to 45 containers a minute
2. Fill weight: 1 g to 500 g, by changing the auger
3. Container handling: linear conveyor, no-container-no-fill sensor
4. Power: single-phase or three-phase
Is this the right machine for you?
✓ Yes, if…
- One operator placing containers can't keep up any more
- You fill rigid containers — tubs, jars or cans
- Spot checks on a separate scale are enough for your fill tolerance
- You want the filler to hand containers straight to a capper or sealer
✕ Buy something else if…
- Every container has to hit its label weight → the APK-GEF50E feeds containers automatically and weighs every fill
- One head can't keep up either → the APK-GEF50D has two filling heads
- Your volume is low and one operator is enough → the semi-automatic APK-GEF50A costs less
- You fill pouches or bags → an automatic container feed works on rigid containers. For pouches, look at a premade pouch machine
Containers Fed for You
Containers arrive, stop under the head, get filled and move on, without anyone placing them. That’s the whole difference between this machine and the semi-automatic ones — the filling is the same auger, the handling isn’t.
No Container, No Fill
A sensor checks that a container is in place before the auger turns. A gap in the line or a tipped container means no powder on the conveyor.
Agitator and Auger on Separate Drives
The hopper agitator and the filling auger are driven independently, so the powder is kept moving over the auger without the agitator speed being tied to the fill.
Height and Width Adjust on Handwheels
Guide rails and the filling head height adjust for different container sizes.
Technical specification
Feature | APK-GEF50C | What it means for you |
Filling heads | 1 | Need more speed? See the GEF50D |
Dosing | Auger | — |
Weighing | None — volumetric | Check weights on a separate scale, or see the GEF50E |
Container handling | Linear conveyor | — |
Fill weight | 1–500 g | Change the auger for different ranges |
Accuracy | ±0.3%–1% (Dependent on specific powder uniformity and density) | Ask for it at your fill weight, in grams |
Speed | 25–45/min | — |
Power | 2.2 kW | Built to your local supply; we confirm the voltage and frequency with your quote |
Controls | PLC | — |
Model comparison
Model | Type | Weighing | Fill weight | Speed | Power |
APK-GEF50A | Semi-automatic | None — volumetric | 10-5000g | 10–50/min | 1.8 kW |
APK-GEF50B | Semi-automatic | Built-in, corrects each fill | 10–5,000 g | 10–50/min | 1.8 kW |
APK-GEF50C | Single-head automatic | None — volumetric | 1–500 g | 25–45/min | 2.2 kW |
APK-GEF50D | Twin-head automatic | None — volumetric | 10–5,000 g | 25–60/min | 3.5 kW |
APK-GEF50E | Single-head automatic, screw-conveyor fed | Built-in, corrects each fill | 10–2,000 g | 20–40/min | 3.0 kW |
Two questions decide the model. Does every container have to hit its label weight? Then you want a built-in scale. Can one operator keep up placing containers? If not, you want an automatic model that feeds them for you.
Production Applications
Protein powder jars and small tubs
Whey and plant protein in fills up to 500 g, where hand-placing is what limits the shift.
Drink mixes and meal replacements in canisters
Free-flowing blends in rigid canisters at steady volume.
Collagen and creatine jars
Fine, free-flowing powders in wide-mouth jars.
Coffee and cocoa tins
Round tins and cans fed straight to a capper or seamer downstream.
What changing over involves
| What changed | What you adjust | Roughly |
| Same container, different fill weight | Set the new dose on the screen | A few minutes |
| Different container size | Guide rails and filling head height | 15-30 Minutes |
| Different powder | Clean the hopper and auger | 15-30 Minutes |
| Fill weight outside the auger’s range | Change the auger | 15-30 Minutes |
The auger sets the fill range, so tell us your smallest and largest fill and we’ll supply the augers to cover both.
What to check before you buy
Fill weight against your label, not a percentage
Ask any supplier for accuracy at your fill weight, in grams.
Whether it weighs, or only counts turns
A volumetric auger drifts as the powder settles. Ask whether the machine weighs each fill and corrects itself, or relies on someone to check.
What changes when your container changes
Ask whether a new container size is a handwheel adjustment or a new set of change parts — and what those parts cost.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Run Your Powder Before You Order
Send us a sample and we fill it on the machine before you order, so you see the weight spread on your own product. Tell us your smallest and largest fill and we supply the augers to cover both.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Fully Expanded Technical FAQ for APK-GEF50C
Nobody places the containers. The auger does the same job; the difference is that containers arrive, stop and leave on their own, so your output is set by the machine rather than by how fast one person can work.
The line integrates high-sensitivity inline photoelectric sensors right before the filling gate. If a container falls over, or if there is a gap in your conveyor feed, the sensor stops the vertical auger screw from rotating. The dosing loop will only execute when a container is upright and centered under the nozzle.
Yes. The hopper and auger come apart with quick-release clamps, so cleaning between powders doesn’t mean dismantling the filling head.
Yes. It hands filled containers straight to a capper or induction sealer downstream, and can take containers from an unscrambler upstream. Tell us which machines you’re linking and we’ll match the rates.
Adjustments are fast and purely mechanical. For the physical line, you simply adjust the quick-release handwheels to slide the conveyor guardrails closer or wider, and rotate the vertical column crank to raise or lower the single-head filler to match the new container height. For the fill, you recall the saved setting on the touchscreen.
No. Check weights on a separate scale, or see the APK-GEF50E, which weighs every fill.
Yes, to order. We build to your local supply and confirm the voltage and frequency with your quote.
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Customers Also Interested In...
Send us your container and your powder.
On an automatic filler the container matters as much as the powder — its diameter and height decide the handling. Send us both, with your fill weight and daily volume, and we’ll tell you which model fits.
Direct from our factory
Lead time confirmed in your quote
Installation and training available
Spare parts listed in your quote