Powder Filling Machine
Auger Fillers for Protein, Pre-Workout and Supplement Powders — Semi-Automatic to Full Line
Five auger fillers and a complete can line. Two questions decide which one you need: does every container have to hit its label weight, and can one operator keep up placing containers? Answer those and you’re down to one model.
Why Choose Our Powder Filling Machine?
Servo-Driven Augers
Every model doses with a servo-driven auger. It stops at the same point every cycle and its speed is set on the screen — the base that everything else relies on.
Built-In Weighing on the B and E
Two of the five weigh every fill on a scale under the outlet and correct the auger for the next one. That’s how they hold label weight as the powder settles and changes density through a shift.
Dust Pickup at the Outlet
Powder that escapes at the filling point is pulled away rather than settling on the machine and the container. On the full line, the rim is blown off and the outside of the can brushed clean before capping and labeling.
Augers for Your Fill Range
The auger decides the fill range. Tell us your smallest and largest fill and we supply the augers to cover both — from 10 g sample packs to 5 kg tubs.
Two Questions Pick Your Model
An auger doses by volume. Powder settles and changes density, so the same volume weighs a little different through the shift. If spot checks on a separate scale are enough, you don’t need a built-in scale. If every tub has to be right, you do.
On the semi-automatic models, someone holds each container under the outlet. Once that person can’t keep up, you want an automatic model that feeds containers for you.
| No built-in scale | Built-in scale | |
| Semi-automatic — operator places containers | APK-GEF50A | APK-GEF50B |
| Automatic, single head | APK-GEF50C | APK-GEF50E |
| Automatic, twin head | APK-GEF50D | — |
Need scoop insertion, capping, sealing and labelling too? See the complete can line.
What These Machines Fill
Model comparison
| Model | Type | Weighing | Fill weight | Speed | Power |
|---|---|---|---|---|---|
| APK-GEF50A | Semi-automatic | None — volumetric | 10–5,000 g | 10–50/min | 1.8 kW |
| APK-GEF50B | Semi-automatic | Built-in, corrects each fill | 10–5,000 g | 10–50/min | 1.8 kW |
| APK-GEF50C | Single-head automatic | None — volumetric | 1–500 g | 25–45/min | 2.2 kW |
| APK-GEF50D | Twin-head automatic | None — volumetric | 10–5,000 g | 25–60/min | 3.5 kW |
| APK-GEF50E | Single-head automatic, screw-conveyor fed | Built-in, corrects each fill | 10–2,000 g | 20–40/min | 3.0 kW |
Our Powder Filling Product Range
Those two tell us whether you need a scale. Your daily volume tells us whether you need automation. Send all three and we’ll tell you which model — including when the answer is the cheaper one.
Documentation & Selection Support
Verify our quality standards and simplify your procurement process with our official documentation.
Product Portfolio
Quality Assurance
Send Us a Sample
FAQ Powder Filling Machine Frequently Asked Questions
Semi-automatic machines require manual placement of containers or pouches and are ideal for small-batch or pilot production. Automatic machines feed the containers for you, so one operator can look after the machine instead of placing every container. Single head or twin head depends on how many containers a minute you need.
Yes. The augers are fed from agitated hoppers so the powder doesn’t bridge, and dust at the outlet is picked up rather than left on the machine. For very sticky powders, send us a sample first.
It depends on the model and your fill weight. The GEF50B holds ±0.5–1 g under 100 g, ±0.5–1% from 100 g to 1 kg, and ±0.25–0.5% above 1 kg. The GEF50D holds ±0.3–1%. The models with a built-in scale hold label weight more consistently through a shift.
The GEF50B and GEF50D can be built for single-phase or three-phase power, and we confirm the voltage with your quote. Ask us about the other models.
Two containers fill at once, so the line runs faster without the auger turning faster. If one head keeps up with your volume, a single-head model costs less.
Stainless steel, with SUS304 on the contact parts. Ask us if your product needs 316L.
A new fill weight is a screen setting. A new powder means cleaning the hopper and auger. A fill outside the auger’s range means changing the auger.
Maintenance is straightforward. The design allows for quick disassembly of the hopper and auger screw, so the hopper and auger come apart for thorough cleaning between products.
Yes. Whether you need a standalone filler or a fully integrated “protein powder can filling line” our engineering team provides end-to-end consulting to tailor the hardware to your specific product density and packaging speed goals.
Operating and maintenance manuals in English, a spare parts list with prices, and installation and training on site. Ask what’s included in your quote and what costs extra.
Send us your powder, your label weight and your volume
Label weight tells us whether you need a scale. Daily volume tells us whether you need automation. Your container tells us the rest. Send all three and we’ll tell you which model fits.
- Direct from our factory
- Lead time confirmed in your quote
- Installation and training available
- Spare parts listed in your quote