NJP-7500C Automatic Capsule Filling Machine — 450,000 Capsules/Hour

The NJP-7500C fills 450,000 capsules an hour — the top of the NJP range. At this output the filler is one component of a line, not a standalone purchase.

1. Output: 450,000 capsules an hour

2. Indexing: 100DS cam indexing box

3. 99.9% Capsule-Feeding Success Rate: Vacuum separation opens empty capsules reliably at full speed.

4. Powder handling: Vibration-assisted butterfly valve hopper — force-feeds sticky herbal powders that jam a screw feeder

Is the NJP-7500C the right filler for you?

✓ This is a fit if…

✕ Look elsewhere if…

Technical specification

Model

NJP-7500C

Max Output

450,000 capsules/hour (7,500 pcs/min)

Capsule Sizes

00# to 5#

Number of Dosing Bores

54 bores

Filling Accuracy

±3% (pharmaceutical powder) / ±4% (herbal powder)

Suitable Materials

Powder, Granule, Pellet

Power Supply

3.0 kW, 60 Hz. Built to your U.S. supply; we confirm the voltage with your quote

Vacuum Requirement

40 m³/h, −0.04 to −0.08 MPa

Dust Extraction

210 m³/h, 24.5 kPa

Compressed Air

5 m³/h, 5–7 bar

Noise Level

< 75 dB(A)

Overall Dimensions

1,200 × 1,000 × 2,150 mm (L×W×H)

Net Weight

3,500 kg

Vacuum pump type

Oil-free dry vacuum pump

Lubrication

Automatic timed lubrication

Facility requirement

21 °C ± 3 °C, RH 40–60%

 

Model comparison

Model

Output pcs/h

Type

Best for…

 

NJP-200C

12,000

C

Small batches and product development

View →

NJP-400C

24,000

C

Growing production

View →

NJP-800C

48,000

C

Standard commercial output

View →

NJP-1200D

72,000

D

Sticky and herbal powders at scale — dry vacuum pump, auto lubrication

View →

NJP-2500C

150,000

C

High-volume continuous production

View →

NJP-3800C

228,000

C

Large-scale manufacturing

View →

NJP-5500C

330,000

C

Very high volume

View →

NJP-7500C

450,000

C

Highest output in the range

You are here

The D suffix is a configuration, not just a speed step. C-type machines use a water-ring vacuum pump and external-groove cam lubrication. The D adds a dry vacuum pump — no water to refill, no scale build-up — plus enclosed internal-groove cams with automatic timed oiling, and a nano anti-corrosion coating over the same stainless steel. If your formulation is corrosive or your maintenance team is thin, that’s what you’re paying for.

Butterfly valve hopper with forced vibration

Employs a vibration-assisted butterfly valve to force-feed powders with poor liquidity, solving traditional screw-feeding clogs.

100DS indexing box

Features an upgraded drive core with a 30 mm output shaft, which gives more stability than a standard 83DS box.

Negative-pressure powder recovery

A negative-pressure device at the filling station captures powder from unseparated capsules for recycling.

Guideway-driven capsule seeder

An enclosed guideway transmission system ensures accurate capsule orientation and a significantly longer service life.

One-piece enclosed turntable

CNC-machined frame with dustproof skeleton seals that keep powder out of the drive.

Keeping Powder Out of the Drive System

The enclosed turntable runs three years without internal maintenance or manual oiling with a dual-lip skeleton dust ring to prevent powder ingress.

How Much Powder Are You Losing per Batch?

Powder from capsules that fail to separate is drawn into a collector by negative pressure instead of falling onto the platform, so you recover it rather than sweep it up.

Running at 450,000/h Without Losing Fill Accuracy

Ten stations split separation, filling and locking into separate steps, so the NJP-7500C holds its fill weight at 450,000 capsules an hour.

Industrial Applications

Herbal and botanical extracts

Poor flowability is the classic reason a capsule line stalls. Herbal powders arch above a screw feeder outlet instead of falling through it. The butterfly valve hopper vibrates the material past that point — this is the case it was built for.

Hygroscopic powders

Moisture-absorbing powders stick to the mold holes and stop capsules separating. An air jet clears both mold holes on every rotation, which is what keeps the capsule-feeding success rate from dropping through a shift.

Pellets and powder-plus-pellet

Station five is left open for an optional pellet dosing unit. A machine bought for powder today can run powder-plus-pellet later without going back to the factory — tell us if that’s on your roadmap and we’ll leave the interface in place.

High-value actives and concentrated extracts

When the powder costs more than the capsule, recovery matters more than speed. Two separate lines — one for waste capsules, one for clean powder — mean what you reclaim goes straight back into the batch.

Changeover: what you change and how long it takes

What you changed

What gets adjusted

Roughly how long

Same capsule, different fill weight

Tamping pin depth on the dosing station

15–30 minutes

Fill weight beyond the adjustment range

Swap the dosing disc for a different thickness

15–30 minutes

Different capsule size

Full tooling set: upper and lower modules, tamping pins, capsule tubes, alignment combs, feeding combs, dosing disc, alignment bars

15–30 minutes

Dosing disc thickness is the second lever. When tamping depth reaches its mechanical limit and you still can’t hit your target fill weight, you change the disc rather than fighting the machine. It’s a physical volume change, not a calibration.

The gaps matter more than they sound. Dosing disc to copper ring: 0.08–0.12 mm. Isolation block to disc: 0.05–0.1 mm. Every disc change means resetting the second one. Too tight and the disc binds; too loose and powder leaks and your fill weight scatters.

Cleaning is the long part. Between products, the powder hopper, dosing ring, upper and lower modules, tamping pins and dosing disc all come out. Parts above the machine table are cleaned with alcohol on lint-free cloth — never gasoline, kerosene, hydrogen peroxide or acetone.

What to check before you order — from any supplier

01

Ask to see the machine running your powder, not a demo powder

Lactose and starch run beautifully on everything. Ask for a video of your own material, or send a 2 kg sample for a trial run. Any factory that won't do this is telling you something.

02

Ask what the sustained rate is, not the maximum rate

Catalogue output figures are peak numbers. Ask what the machine holds over an eight-hour shift with your fill weight and your capsule size, and what the reject rate looks like at that speed.

03

Ask for the operating manual before you pay

If the adjustment procedures aren't in it — tamping pin height, dosing disc clearances, vacuum settings — your operators will be calling the factory every time something drifts.

04

Ask which parts are wear parts and what they cost

On a capsule filler that means seals, tamping pins and the dosing disc. Get the list and the prices in writing with the quotation.

05

Ask what the electrical supply actually is

Most machines from Asia ship at 380V / 50Hz as standard. Confirm in writing that yours will arrive configured for your plant, and whether the output figure still holds after the change.

06

Ask who installs it and who trains your operators

"We provide installation support" can mean an engineer on your floor or a PDF. Ask which, ask for how many days, and ask what happens if commissioning takes longer.

Why Choose AIPAK?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

We Run Your Powder Before You Order

Send us a 2 kg sample of your powder. We run it on a test machine and send you the fill weight figures before you order.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

NJP-7500C Flagship Performance FAQ

How does the NJP-7500C avoid the mechanical fatigue common in ultra-high-speed fillers?
We have replaced the standard 83DS indexing box with the 100DS high-precision cam dividing box, which has a 30 mm output shaft. This upgrade provides the superior torque and structural rigidity required to prevent shaft breakage and vibration, even when running at peak industrial capacity.
Is the precision compromised when operating at maximum throughput?

No. The guideway-driven capsule seeder keeps capsule orientation accurate at full speed, and the tamping pins hold fill weight within ±3% on pharmaceutical powder and ±4% on herbal powder.

What makes the NJP-7500C suited to herbal and botanical powders?
Traditional screw-feeding systems often fail with herbal powders due to poor liquidity. Our butterfly valve hopper uses an integrated vibration unit to force-feed sticky or hygroscopic powders, ensuring a continuous and stable flow that traditional devices cannot achieve.
How does the "Die Hole Cleaning Device" improve uptime with sticky powders?
It employs purified compressed air and intermittent gas impingement to clean the mold holes during operation. This prevents high-viscosity powders from sticking to the die, which effectively increases the capsule loading probability and reduces downtime for manual cleaning.
How much powder does the recovery device save?

Powder from capsules that fail to separate is drawn into a collector by negative pressure instead of falling onto the platform. At 450,000 capsules an hour, that adds up, and the recovered powder goes back into the batch rather than in the bin.

What are the long-term maintenance savings of the enclosed design?

The ten-station turntable is a one-piece forming structure with no splicing gaps, protected by dustproof lip skeleton seals. The enclosed turntable runs three years without internal maintenance or manual oiling.

How is the machine protected against data loss during a power failure?

Batch records and parameter settings are held in the retentive memory of the Siemens PLC, so data written before the interruption is preserved and available when power is restored. The machine stops in a controlled state and requires operator acknowledgement before restarting, so an interrupted batch is never silently resumed. An uninterruptible power supply for the control cabinet is available as an option where site power is unstable.

What is the typical lead time for shipping to the United States?

Lead time depends on the configuration and is confirmed in writing in your quote, along with the shipping time to your port.

Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send us your powder details and your target output

We’ll come back with a machine recommendation, tooling list and a price. If this model isn’t the right size for you, we’ll tell you which one is.

  • Direct from our factory

  • Lead time confirmed in your quote

  • Installation and training available

  • Spare parts listed in your quote

Scroll to Top