NJP-3800C Automatic Capsule Filling Machine — 228,000 Capsules/Hour

The NJP-3800C fills 228,000 capsules an hour on twenty-one dosing bores. It’s built for continuous multi-shift production.

1. Output: 228,000 capsules an hour

2. Powder handling: Vibration-assisted butterfly valve hopper

3. Advanced Indexing: Equipped with the heavy-duty 100DS high-precision cam indexing box.

4. 99.9% Empty Capsule Feeding  Rate: Precise vacuum separation ensures minimal capsule waste.

Is the NJP-3800C the right filler for you?

✓ This is a fit if…

✕ Look elsewhere if…

Technical specification

Model

NJP-3800C

Max Output

228,000 capsules/hour (3,800 pcs/min)

Capsule Sizes

00# to 5#

Number of Dosing Bores

21 bores

Filling Accuracy

±3% (pharmaceutical powder) / ±4% (herbal powder)

Suitable Materials

Powder, Granule, Pellet

Power Supply

3.0 kW, 60 Hz. Built to your U.S. supply; we confirm the voltage with your quote

Dust Extraction

210 m³/h, 24.5 kPa

Compressed Air

5 m³/h, 5–7 bar

Noise Level

< 75 dB(A)

Overall Dimensions

1,100 × 1,200 × 2,000 mm (L×W×H)

Net Weight

1,100 kg

Facility requirement

21 °C ± 3 °C, RH 40–60%

 

Model comparison

Model

Output pcs/h

Type

Best for…

 

NJP-200C

12,000

C

Small batches and product development

View →

NJP-400C

24,000

C

Growing production

View →

NJP-800C

48,000

C

Standard commercial output

View →

NJP-1200D

72,000

D

Sticky and herbal powders at scale — dry vacuum pump, auto lubrication

View →

NJP-2500C

150,000

C

High-volume continuous production

View →

NJP-3800C

228,000

C

Large-scale manufacturing

You are here

NJP-5500C

330,000

C

Very high volume

View →

NJP-7500C

450,000

C

Highest output in the range

View →

The D suffix is a configuration, not just a speed step. C-type machines use a water-ring vacuum pump and external-groove cam lubrication. The D adds a dry vacuum pump — no water to refill, no scale build-up — plus enclosed internal-groove cams with automatic timed oiling, and a nano anti-corrosion coating over the same stainless steel. If your formulation is corrosive or your maintenance team is thin, that’s what you’re paying for.

Butterfly valve hopper with forced vibration

Replaces screw feeding with a vibration-equipped butterfly valve, so poor-flowing herbal and botanical powders keep moving without clogging.

100DS indexing box

We use the 100DS cam indexing box with a 30 mm output shaft, which gives more torque and stability than a standard 83DS box.

Negative-pressure powder recovery

Features a filling pedestal that draws powder from unseparated capsules straight into a reclaimer for reuse.

Guideway-driven capsule seeder

Utilizes a guideway transmission mechanism with an enclosed design to prevent dust and capsule fragments from interfering with orientation.

One-piece enclosed turntable

CNC-machined one-piece frame with dustproof skeleton seals that keep powder out of the drive.

Automatic timed lubrication

Integrated timing and quantitative oil supply system to maximize the service life of all moving transmission parts.

How Much Powder Are You Losing per Batch?

Powder from capsules that fail to separate is drawn into a collector by negative pressure instead of falling onto the platform, so you recover it rather than sweep it up.

Keeping Powder Out of the Drive System

The enclosed turntable runs three years without internal maintenance or manual oiling with a dual-lip skeleton dust ring to prevent powder ingress.

Running at 228,000/h Without Losing Fill Accuracy

Ten stations split separation, filling and locking into separate steps, so the NJP-3800C holds its fill weight at 228,000 capsules an hour.

Industrial Applications

Herbal and botanical extracts

Poor flowability is the classic reason a capsule line stalls. Herbal powders arch above a screw feeder outlet instead of falling through it. The butterfly valve hopper vibrates the material past that point — this is the case it was built for.

Hygroscopic powders

Moisture-absorbing powders stick to the mold holes and stop capsules separating. An air jet clears both mold holes on every rotation, which is what keeps the capsule-feeding success rate from dropping through a shift.

Pellets and powder-plus-pellet

Station five is left open for an optional pellet dosing unit. A machine bought for powder today can run powder-plus-pellet later without going back to the factory — tell us if that’s on your roadmap and we’ll leave the interface in place.

High-value actives and concentrated extracts

When the powder costs more than the capsule, recovery matters more than speed. Two separate lines — one for waste capsules, one for clean powder — mean what you reclaim goes straight back into the batch.

Changeover: what you change and how long it takes

What you changed

What gets adjusted

Roughly how long

Same capsule, different fill weight

Tamping pin depth on the dosing station

15–30 minutes

Fill weight beyond the adjustment range

Swap the dosing disc for a different thickness

15–30 minutes

Different capsule size

Full tooling set: upper and lower modules, tamping pins, capsule tubes, alignment combs, feeding combs, dosing disc, alignment bars

15–30 minutes

Dosing disc thickness is the second lever. When tamping depth reaches its mechanical limit and you still can’t hit your target fill weight, you change the disc rather than fighting the machine. It’s a physical volume change, not a calibration.

The gaps matter more than they sound. Dosing disc to copper ring: 0.08–0.12 mm. Isolation block to disc: 0.05–0.1 mm. Every disc change means resetting the second one. Too tight and the disc binds; too loose and powder leaks and your fill weight scatters.

Cleaning is the long part. Between products, the powder hopper, dosing ring, upper and lower modules, tamping pins and dosing disc all come out. Parts above the machine table are cleaned with alcohol on lint-free cloth — never gasoline, kerosene, hydrogen peroxide or acetone.

What to check before you order — from any supplier

01

Ask to see the machine running your powder, not a demo powder

Lactose and starch run beautifully on everything. Ask for a video of your own material, or send a 2 kg sample for a trial run. Any factory that won't do this is telling you something.

02

Ask what the sustained rate is, not the maximum rate

Catalogue output figures are peak numbers. Ask what the machine holds over an eight-hour shift with your fill weight and your capsule size, and what the reject rate looks like at that speed.

03

Ask for the operating manual before you pay

If the adjustment procedures aren't in it — tamping pin height, dosing disc clearances, vacuum settings — your operators will be calling the factory every time something drifts.

04

Ask which parts are wear parts and what they cost

On a capsule filler that means seals, tamping pins and the dosing disc. Get the list and the prices in writing with the quotation.

05

Ask what the electrical supply actually is

Most machines from Asia ship at 380V / 50Hz as standard. Confirm in writing that yours will arrive configured for your plant, and whether the output figure still holds after the change.

06

Ask who installs it and who trains your operators

"We provide installation support" can mean an engineer on your floor or a PDF. Ask which, ask for how many days, and ask what happens if commissioning takes longer.

Why Choose AIPAK?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

We Run Your Powder Before You Order

Send us a 2 kg sample of your powder. We run it on a test machine and send you the fill weight figures before you order.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

NJP-3800C FAQ

How does the NJP-3800C maintain stability at its maximum speed of 228,000 pcs/h?

It runs on the 100DS cam indexing box, with a reinforced drive core and more torque than a standard 83DS box. That’s what keeps vibration down through continuous high-speed shifts.

Is the NJP-3800C suitable for high-value or sensitive formulations?

Yes. Powder from capsules that fail to separate is drawn into a collector instead of onto the platform, so you recover it. The enclosed turntable and seals keep powder out of the drive. If your powder is highly potent, tell us your OEB band first.

How does the machine handle weight consistency across such a large volume?
We implement Advanced Tamping Pin Technology with 21-hole segments. For real-time quality assurance, the machine can provide  automatic rejection of out-of-tolerance capsules.
Can the NJP-3800C be integrated into a smart factory (Industry 4.0)?

Yes. The control system runs on a Siemens PLC and can be connected to your plant network for MES or SCADA. Tell us your protocol at the quotation stage.

What is the maintenance requirement for a machine of this scale?
Despite its high output, the 3800C is designed for low maintenance. The one-piece enclosed turntable and its skeleton seals keep powder out of the drive unit, which keeps routine maintenance short.
How long does it take to switch products or capsule sizes?

A size change means swapping the full tooling set: upper and lower modules, tamping pins, capsule tubes, combs, dosing disc and alignment bars. The changeover table above shows what each kind of change involves. At twenty-one bores it’s a bigger job than on the smaller models, so ask us for the time on your size range.

How does it perform with poor-liquidity or sticky powders at high speeds?
The 3800C utilizes our Vibration-Assisted Butterfly Valve technology. This prevents “bridging” in the hopper and ensures a constant, pressurized flow of material into the dosing station, keeping fill weight within ±4% on herbal powder.
What is the typical lead time for shipping to the United States?
Lead time depends on the configuration and is confirmed in writing in your quote, along with the shipping time to your port.
Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send us your powder details and your target output

We’ll come back with a machine recommendation, tooling list and a price. If this model isn’t the right size for you, we’ll tell you which one is.

  • Direct from our factory

  • Lead time confirmed in your quote

  • Installation and training available

  • Spare parts listed in your quote

Scroll to Top