NJP-1200D Automatic Capsule Filling Machine — 72,000 Capsules/Hour

Ten stations, 1,200 capsules a minute, on a 100DS indexing box

The NJP-1200D fills 1,200 capsules a minute — powder, pellets, tablets or a combination. It’s the model where we move to the heavy-duty 100DS indexing box, which is what lets it hold that rate without the shaft fatigue that shows up on lighter machines pushed to the same speed.

1. Output: Up to 72,000 pcs/h as a sustained rate.

2. 10-Station Indexing: Ten-station rotary system that holds precision at full speed.

3. Optimized Stability: Reinforced heavy-duty frame that keeps vibration down at full speed.

4. Powder handling: Vibration-assisted butterfly valve hopper — force-feeds sticky herbal powders that jam a screw feeder.

Is the NJP-1200D the right filler for you?

✓ This is a fit if…

✕ Look elsewhere if…

Technical specification

ModelNJP-1200D
Max Output72,000 capsules/hour (1,200 pcs/min)
Capsule Sizes#00, #0, #1, #2, #3, #4, #5
Number of Dosing Bores9 bores
Filling Accuracy±3% (pharmaceutical powder) / ±4% (herbal powder)
Suitable MaterialsPowder, Granule, Pellet, Tablet
Power Supply

5.5 kW, 60 Hz. Built to your U.S. supply; we confirm the voltage with your quote

Vacuum Requirement40 m³/h, −0.04 to −0.08 MPa
Dust Extraction210 m³/h, 24.5 kPa
Compressed Air5 m³/h, 5–7 bar
Noise Level< 75 dB(A)
Overall Dimensions1,100 × 910 × 2,100 mm (L×W×H)
Net Weight1,000 kg
Vacuum pump typeDry vacuum pump (D-type configuration)
LubricationEnclosed internal-groove cam with automatic timed oiling
Facility requirement21 °C ± 3 °C, RH 40–60%

Model comparison

Model

Output pcs/h

Type

Best for…

 

NJP-200C

12,000

C

Small batches and product development

View →

NJP-400C

24,000

C

Growing production

View →

NJP-800C

48,000

C

Standard commercial output

View →

NJP-1200D

72,000

D

Sticky and herbal powders at scale — dry vacuum pump, auto lubrication

You are here

NJP-2500C

150,000

C

High-volume continuous production

View →

NJP-3800C

228,000

C

Large-scale manufacturing

View →

NJP-5500C

330,000

C

Very high volume

View →

NJP-7500C

450,000

C

Highest output in the range

View →

The D suffix is a configuration, not just a speed step. C-type machines use a water-ring vacuum pump and external-groove cam lubrication. The D adds a dry vacuum pump — no water to refill, no scale build-up — plus enclosed internal-groove cams with automatic timed oiling, and a nano anti-corrosion coating over the same stainless steel. If your formulation is corrosive or your maintenance team is thin, that’s what you’re paying for.

Butterfly valve hopper with forced vibration

The new hopper utilizes a vibration-equipped butterfly valve mechanism instead of traditional screw feeding. This solves the chronic issue of poor powder flowability, which makes it suited to sticky herbal and botanical powders.

100DS indexing box

We use the 100DS high-precision cam dividing box (output shaft diameter: 30 mm) This provides larger torque and superior stability, allowing a consistent output of 1,200 capsules/minute without the risk of shaft breakage common in standard 83DS models.

Negative-pressure powder recovery

Features a filling pedestal design with integrated negative pressure. If abnormal capsules fail to separate, the powder is instantly inhaled into a collector rather than falling onto the platform, ensuring material yield and preventing mechanical erosion.

One-piece enclosed turntable

The ten-station rotary frame is formed by one-piece processing with no splicing gaps. Equipped with dustproof lip skeleton seals, the completely enclosed system ensures no refueling and no powder ingress for up to three years.

Guideway-driven capsule seeder

The new seeder rack adopts a guideway transmission mechanism. Its enclosed design prevents waste capsule fragments and dust from entering, ensuring accurate capsule orientation and a significantly longer service life.

Automatic timed lubrication

Equipped with an automatic oil supply system that delivers quantitative lubrication at fixed points and times. This maintains the transmission mechanism in peak condition, drastically reducing accessory wear.

How Much Powder Are You Losing per Batch?

Powder from capsules that fail to separate is drawn into a collector by negative pressure instead of falling onto the platform, so you recover it rather than sweep it up.

Keeping Powder Out of the Drive System

The enclosed turntable runs three years without internal maintenance or manual oiling with a dual-lip skeleton dust ring to prevent powder ingress.

Running at 72,000/h Without Losing Fill Accuracy

Ten stations split separation, filling and locking into separate steps, so the NJP-1200D holds its fill weight at 72,000 capsules an hour.

Industrial Applications

Herbal and botanical extracts

Poor flowability is the classic reason a capsule line stalls. Herbal powders arch above a screw feeder outlet instead of falling through it. The butterfly valve hopper vibrates the material past that point — this is the case the 1200D was built around.

Hygroscopic powders

Moisture-absorbing powders stick to the mold holes and stop capsules separating. An air jet clears both mold holes on every rotation, which is what keeps the capsule-feeding success rate from dropping through a shift.

Pellets and powder-plus-pellet

Station five is left open for an optional pellet dosing unit. A machine bought for powder today can run powder-plus-pellet later without going back to the factory — tell us if that’s on your roadmap and we’ll leave the interface in place.

High-value actives and concentrated extracts

When the powder costs more than the capsule, recovery matters more than speed. Two separate lines — one for waste capsules, one for clean powder — mean what you reclaim goes straight back into the batch.

Changeover: what you change and how long it takes

What you changed

What gets adjusted

Roughly how long

Same capsule, different fill weight

Tamping pin depth on the dosing station

15–30 minutes

Fill weight beyond the adjustment range

Swap the dosing disc for a different thickness

15–30 minutes

Different capsule size

Full tooling set: upper and lower modules, tamping pins, capsule tubes, alignment combs, feeding combs, dosing disc, alignment bars

15–30 minutes

Dosing disc thickness is the second lever. When tamping depth reaches its mechanical limit and you still can’t hit your target fill weight, you change the disc rather than fighting the machine. It’s a physical volume change, not a calibration.

The gaps matter more than they sound. Dosing disc to copper ring: 0.08–0.12 mm. Isolation block to disc: 0.05–0.1 mm. Every disc change means resetting the second one. Too tight and the disc binds; too loose and powder leaks and your fill weight scatters.

Cleaning is the long part. Between products, the powder hopper, dosing ring, upper and lower modules, tamping pins and dosing disc all come out. Parts above the machine table are cleaned with alcohol on lint-free cloth — never gasoline, kerosene, hydrogen peroxide or acetone.

Three things to check before you buy any capsule filler

01

Fill weight accuracy, verified on your powder

A demo with someone else's material proves nothing. Fill weight accuracy depends on three things together — the machine, your production environment, and your powder's own behavior. Ask any supplier to run your formulation and show you the actual weight variation across a full run, not a figure off a brochure. We do that at factory acceptance testing before the machine ships, and you see the numbers.

02

The manual

Your operator sets tamping pin height, dosing disc gaps and vacuum pressure. Those three decide whether your fill weight holds. They need an English manual with the adjustment procedures in it — including the gap figures, 0.08 to 0.12 mm between dosing disc and copper ring, and 0.05 to 0.1 mm at the isolation block. Ask to see the manual before you order.

03

Installation and training

The machine runs out of the crate. Getting it filling consistently on your powder takes someone who has done it before — most first-run weight problems come from the powder or the room, not the machine, and knowing which is which is the difference between a week of commissioning and a month. Our engineers install it, dial it in on your material, and train your operators.

Why Choose AIPAK?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

We Run Your Powder Before You Order

Send us a 2 kg sample of your powder. We run it on a test machine and send you the fill weight figures before you order.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

NJP-1200D Deep-Dive FAQ

Can the NJP-1200D handle highly potent powders without leaking dust?

The rotary table is fully enclosed with double-lip skeleton seals, and dust extraction ports draw airborne powder away from the filling and separation stations during operation. This keeps the working platform clean and limits powder migration into the drive housing. Note that containment for high-potency compounds is defined by your facility’s OEB classification and verified by surrogate testing — an enclosed rotary machine with dust extraction is not equivalent to a contained or isolator-based system. Tell us your OEB band and we will advise whether the 1200D is a suitable base machine or whether additional containment is required.

How does the machine manage powder "clumping" or bridging at high speeds?

The 1200D replaces the conventional screw feeder with a vibration-assisted butterfly valve hopper. The vibration unit keeps material moving through the outlet instead of arching above it, which is the usual cause of bridging with hygroscopic or herbal powders. Downstream, the ten-station layout spreads the filling action across several tamping steps rather than compressing the dose in one stroke, giving the powder time to settle evenly in the dosing bore. This combination keeps fill weight consistent on materials that would stall a screw-fed machine.

What is the expected mechanical lifespan of an NJP-1200D under 3-shift operation?

With a reinforced industrial-grade drivetrain and our maintenance-free enclosed rotary table, the NJP-1200D is engineered for long service life under a standard maintenance schedule. Because the core gears are never exposed to powder, the wear parts are limited to seals and dosing pins.

Does the "Dry Vacuum" system reduce energy consumption?

It removes the water side entirely. A dry pump needs no water circulation or cooling, so there’s no water to refill, no scale build-up and no water bill for the pump. Ask us for the power figures for your configuration.

How does the "Recipe Management" system handle different capsule brands?

Not all capsules are made equal. The touchscreen stores suction and locking settings for each capsule supplier you use. Recall them and the NJP-1200D adjusts its vacuum and timing to suit the shell, whether it’s gelatin or HPMC.

What happens if there is a power surge or sudden outage?

The machine performs a controlled stop rather than a hard halt, so the turntable, dosing discs, and tooling are not damaged by an abrupt interruption. After power is restored, the operator must acknowledge the alarm before the machine will restart, so an interrupted batch is never silently resumed. For sites with unstable power, we recommend an uninterruptible power supply for the control cabinet — we can quote this as an option and confirm the data-retention behaviour of the specific PLC configuration in your order.

How much does the NJP-1200D cost?

It depends on your capsule sizes, whether you need the pellet dosing station, and your auxiliary equipment. Send us your powder details and target output and we’ll quote within 24 business hours.

What is the typical lead time for shipping to the United States?

Lead time depends on the configuration and is confirmed in writing in your quote, along with the shipping time to your port.

Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send us your powder details and your target output

We’ll come back with a machine recommendation, tooling list and a price. If the 1200D isn’t the right size for you, we’ll tell you which one is.

  • Direct from our factory

  • Lead time confirmed in your quote

  • Installation and training available

  • Spare parts listed in your quote

Scroll to Top