DPH-280H-KDZ300H Full Servo High-Speed Blister Cartoning Line
Your blister machine and your cartoner are two separate machines with an operator between them, and the carton bench is where the line backs up. This one links them — the blister machine sets the pace, the cartoner follows it, and a rejected blister means no carton and no leaflet are drawn for that cycle.
1. Line speed: up to 300 cartons a minute
2. Blister punch frequency: 40 to 180 a minute on Alu-PVC, 20 to 80 on Alu-Alu
3. Plates per carton: 1 to 10, set on the HMI
4. Carton size: 70–180 × 35–85 × 15–50 mm
5. Line footprint: 9,500 × 1,500 × 2,000 mm
Is this the right machine for you?
✓ Yes, if…
- You already run a blister machine and a cartoner as separate stations with people between them
- You need more than 150 cartons a minute
- You run one or two formats continuously
- You have 9.5 m of straight line length, or a room that takes an L-shape
✕ Buy something else if…
- You're buying your first blister machine → buy the blister machine and carton by hand. Linking two machines you haven't run separately is a harder project than it looks
- You change format more than once a week → a linked line changes over as one unit. Two separate machines let you change one while the other keeps running
- Your room is under 9.5 m → tell us the dimensions. An L-shaped layout is possible but it changes the transfer bridge
- You need under 100 cartons a minute → a blister machine and a standalone cartoner will cost less and give you more flexibility
Technical specification
Combined System | Specification |
|
Model | DPH-280H (Blister) + KDZ300H (Cartoner) |
|
Max. Line Speed | 300 cartons/min (Synchronized) | The cartoner’s ceiling. Your actual rate is set by the blister machine and your plates per carton |
Blister Punch Frequency | 40–180 cuts/min (Alu-PVC), 20–80 (Alu-Alu) |
|
Max. Forming Area | 280 × 200 mm |
|
Carton Size Range (L×W×H) | (70 – 180) × (35 – 85) × (15 – 50) mm (customizable) |
|
Leaflet Size Range (Unfolded) | (100-250) x (100-180) mm | Larger leaflets won’t fold on this folder |
Blister Stacking Range | 1 – 10 plates per carton (Servo-adjustable) | Changed on the HMI, not by mechanical adjustment |
Total Power | 25 kW (blister machine) + 6 kW (cartoner main motor) |
|
Compressed Air | 0.5–0.7 MPa; about 350 L/min (blister) + 160–200 L/min (cartoner) |
|
Standard Material Width | 270 mm (PVC/ALU/PTP) |
|
Material Specification | PVC, ALU, PTP, Dialysis Paper, 250-350g Paperboard |
|
Line Dimensions | 9500 × 1500 × 2000 mm (L × W × H) | Straight-line layout. L or U shapes change the length |
Total Weight | 4,500 kg |
|
Power supply | Three-phase five-wire, 60 Hz. Built to your U.S. supply; we confirm the voltage with your quote |
|
Carton size | 70–180 × 35–85 × 15–50 mm | Send us your carton — the pusher needs clearance a hand-packed carton doesn’t have |
What the line actually does
SEVEN STATIONS, ONE LINE
Blister machine
Forms, fills, seals and cuts the blister plates. Sets the pace of the whole line.
Vision inspection and reject
A camera checks every plate for empty pockets and broken tablets. A failed plate is rejected here.
Transfer bridge
Lifts each stack with vacuum cups and carries it to the cartoner, with no sliding on the foil.
The blister machine sets the pace. Everything downstream follows it — which is why the line speed on any spec sheet is the cartoner’s ceiling, not your output. Your actual rate is the plates the blister machine cuts a minute — punches times plates per punch — divided by plates per carton. At 180 punches a minute and two plates a punch, that’s 360 plates a minute: 36 cartons at ten plates a carton, or the cartoner’s 300 ceiling at one plate a carton. Tell us your plate layout and count per carton and we’ll work out your real number.
"Smart-Link" Synchronization Bridge
A buffer and transfer station between the two machines adjusts its speed to the blister machine’s real-time output, so the cartoner follows the blister machine rather than the other way round.
Full-Servo Precise Stacking
The blister counting and stacking module uses high-speed servo motors to accurately group 1–10 blister plates per carton, allowing for instant format changes via the HMI.
Separated Drive Frame, Modular Tooling
Drives sit behind the working area on both machines. Format tooling is modular across the line — but note that changing over a linked line means changing both machines together, which is longer than changing one.
A Rejected Blister Means No Carton
When the vision system rejects a blister upstream, the cartoner receives that signal and skips the cycle — no carton drawn, no leaflet folded. On a line running 300 cartons a minute, that’s the difference between wasting one blister and wasting a blister, a carton and a printed leaflet.
Industry Applications
A linked line pays back on long runs of one or two formats. These are the packs it’s built for:
30-day and 60-day supplement packs
Multiple blister plates in one carton — 30-day packs usually run three to five plates, 60-day packs six to ten. Stacking count is set on the HMI, so the same line runs both.
Single-plate retail cartons
One plate, one leaflet, one carton at full line speed. This is where 300 cartons a minute is actually reachable.
Cold-formed Alu-Alu packs
The transfer bridge lifts blisters with vacuum cups rather than pushing them, so there’s no sliding friction on the foil surface.
Multi-SKU contract packing
Several counts and carton sizes across a week. Recipe recall handles the timing; the tooling still changes by hand.
What changing over involves
A linked line changes over as one unit. That’s the trade-off you’re buying.
What changed | What you adjust | Roughly |
Plates per carton (3 → 5) | Stacking count on the HMI | Minutes |
Carton size changes | Cartoner tooling, plus the transfer bridge | 15–45 minutes |
Blister format changes | Blister tooling and the stacker and the cartoner | 15–45 minutes |
Alu-PVC → Alu-Alu | Blister tooling and feeder | Not a changeover |
On two separate machines you can change one while the other keeps running. On a linked line you can’t. If you switch format more than once a week, that’s worth weighing against the operator you save between the two stations.
What to check before you buy
The tooling, not the machine
A format set covers four synchronized stations. Ask any supplier who designs the pocket layout, how long a new format takes to make, and what it costs. That's where a blister project succeeds or fails.
The feeder, before you order
An Alu-PVC universal feeder cannot run cold-formed Alu-Alu, and it cannot be converted afterwards. Ask which feeder you're being quoted and what it locks you out of.
Installation and training
Ask what's included and what costs extra. The answer varies more between suppliers than the machine price does.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Design the Pocket Around Your Product
Send us your tablet or capsule samples and tell us your foil. We design the pocket layout and specify the feeder before we quote, because an Alu-PVC universal feeder can’t be converted to Alu-Alu later.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
High-Speed Integrated Blister Cartoning Line FAQ
The cartoner skips that cycle. When the camera on the blister machine rejects a plate, for example for an empty pocket, the KDZ300H receives the signal through a shift register and doesn’t draw a carton or a leaflet for it. You lose one blister, not a blister, a carton and a printed leaflet.
Conventional “push-style” transfers can scratch the aluminum foil or cause micro-cracks due to friction. Our line features a “Pick-and-Place” Vacuum Manifold equipped with silicone suction cups. It lifts the blisters vertically and deposits them into the stacking magazine. There’s no sliding on the foil, preserving the aesthetic and structural integrity of your high-end ALU/ALU or Tropical Blister packs.
Yes. The KDZ300H cartoning unit is equipped with a synchronized insertion arm. The software allows you to calibrate the insertion sequence so that the leaflet can be wrapped around the blister stack or placed on top, depending on your market’s regulatory requirements. This is all adjustable via the HMI without mechanical re-timing.
The forming molds and the sealing drum are cooled by an external chiller, which keeps the blister web from deforming at full speed. You’ll need space and power for the chiller next to the line.
Take the plates the blister machine cuts a minute — punches times plates per punch — and divide by your plates per carton. At 180 punches and two plates a punch, ten plates a carton is 36 cartons a minute, not 300. The 300 figure is the cartoner’s ceiling, and you only get near it on single-plate cartons. Tell us your plate layout and count per carton and we’ll give you your number before you go any further.
Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Customers Also Interested In...
Send Us Your Plate, Your Carton and Your Room Size
A linked line is sized around three things: your blister plate, your carton and your room. Send us all three, plus your count per carton. We’ll lay out the line, tell you your real cartons-per-minute figure, and tell you if two separate machines would serve you better.
- Direct from our factory
- Lead time confirmed in your quote
- Installation and training available
- Spare parts listed in your quote