DPP-260H1 Ultra-High-Output Flat-Plate Blister Packaging Machine
260 mm forming width, 6,000 to 12,000 plates an hour, Alu-PVC and Alu-Alu
Your line is running two 120 mm machines to hit the plate count you need. This one does it with a single 260 mm forming area — five or six plates a stroke instead of two or three, on one set of tooling and one operator.
1. Punch frequency: 10 to 50 times a minute
2. Output: 6,000 to 12,000 plates an hour
3. Forming area: 260 × 180 mm, depth ≤15 mm standard
4. Stroke range: 40 to 180 mm
5. Materials: PVC, PTP, cold-formed Alu-Alu, dialysis paper
Is this the right machine for you?
✓ Yes, if…
- You need 6,000 to 12,000 plates an hour
- Your plate layout uses the full 260 mm width — five or six plates per stroke
- You run Alu-PVC, Alu-Alu or tropical blister
- You have 3.8 m of line length plus working clearance
✕ Buy something else if…
- Your batches are small and change often → a 120 or 150 mm machine costs less and changes over faster. Wide tooling is heavier to swap
- You only run one plate layout at 2 plates a stroke → you'd be paying for width you can't fill
- You need forming depth beyond 15 mm → tell us the pill dimensions first. Deep-draw is a different tooling configuration
- You're not sure whether you'll move to Alu-Alu → decide before we build. The feeder choice can't be changed later
Maximum Industrial Throughput
Features an expanded forming width that supports multi-lane plate layouts, delivering a significant leap in hourly output for large-scale batches.
Servo Film Traction
Equipped with a high-torque servo motor for material traction, ensuring millimetric accuracy in stroke control and minimizing material waste.
High-Stability Heavy-Duty Drive
The reinforced main drive is built for the load of punching at up to 50 times a minute, with low vibration and noise.
Superior Thermal Sealing Integrity
Utilizes advanced constant-temperature control and high-pressure sealing stations to hold a consistent seal across the full 260 mm width.
Balcony-Style Open Frame
The open frame keeps the drive mechanisms separate from the production zone, so debris stays out of the drive and the production zone is quick to clean.
Technical specification
| Feature | Specification |
| Model | DPP-260H1 Ultra-High-Output Flat-Plate Blister Packaging Machine |
| Punch Frequency | 10–50 times/min |
| Production Capacity | 6,000–12,000 plates/hour |
| Max. Forming Area & Depth | 260 × 180 mm; depth ≤15 mm (custom up to 25 mm) |
| Standard Stroke Range | 40 – 180 mm |
| Material Width (PVC/PTP) | Up to 270 mm |
| Main Motor Power | 3.5 kW |
| Total Power Supply | 9.5 kW, three-phase, 60 Hz. Built to your U.S. supply; we confirm the voltage with your quote |
| Overall Dimension | 3,800 × 850 × 1,800 mm (L×W×H) |
| Weight | 1,600 kg |
Model comparison
Model | Type | Punch freq. | Output | Forming area | Power |
DPP-80 | Flat plate | 10–33 times/min | 1,980 plates/hour | 80 mm | 2.4 kW |
DPP-120H | Flat plate | 10–35 times/min | 2,400–4,200 plates/hour | 120 mm | 4.5 kW |
DPP-150E | Flat plate | 10–40 times/min | 3,600–7,200 plates/hour | 150 mm | 6.5 kW |
DPP-180H | Flat plate | 10–50 times/min | 4,800–9,600 plates/hour | 180 mm | 8.5 kW |
DPP-260H1 | Flat plate | 10–50 times/min | 6,000–12,000 plates/hour | 260 mm | 9.5 kW |
DPP-260H2 | Rotary seal | 60–130 times/min | Up to 28,800 plates/hour | 260 mm | 15 kW |
DPH-260H | Rotary | 80–150 times/min, 200 max | 6,000–18,000 plates/hour | 260 mm | 24 kW |
DPH-380H | Rotary | 40–180 times/min, 200 max | Up to 45,000 plates/hour | 380 mm | 28 kW |
Flat plate and rotary are two different machines, not two speeds of one. Flat plate stretches the film against a mold with positive air pressure and a mechanical punch. Rotary forms and seals on a drum with line contact. The difference shows up in material waste, changeover time and what the machine costs you per plate — the table above shows where each one fits.
What changing over involves
A format set is four stations, not one part.
What changed | What you adjust | Roughly |
Same format, new batch | Nothing | — |
Plate layout or pocket size changes | All four molds — forming, sealing, embossing, cutting | 15–30 minutes |
Alu-PVC → Alu-Alu | Molds, and the feeder — if you specified the Alu-PVC universal feeder, it cannot be converted | Not a changeover |
Tablets → paste or liquid | Molds and a different feeder entirely | Not a changeover |
All four stations sit on a rack mandrel with a ruler. You turn the handle and read the scale rather than aligning by eye — which is what keeps a format change to minutes rather than a morning.
What to check before you buy
The tooling, not the machine
A format set covers four synchronised stations. Ask any supplier who designs the pocket layout, how long a new format takes to make, and what it costs. That's where a blister project succeeds or fails.
The feeder, before you order
An Alu-PVC universal feeder cannot run cold-formed Alu-Alu, and it cannot be converted afterwards. Ask which feeder you're being quoted and what it locks you out of.
Installation and training
Ask what's included and what costs extra. The answer varies more between suppliers than the machine price does.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Design the Pocket Around Your Product
Send us your tablet or capsule samples and tell us your foil. We design the pocket layout and specify the feeder before we quote, because an Alu-PVC universal feeder can’t be converted to Alu-Alu later.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Industry Applications
A 260 mm forming width only pays back when your plate layout fills it. These are the products where it does:
Multivitamin and supplement daily packs
High plate density is what lowers the per-unit cost here. A 260 mm width fits five or six plates a stroke where a 120 mm machine fits two.
Softgel and capsule blisters
Alu-PVC for standard shelf life, cold-formed Alu-Alu for moisture-sensitive fills.
Tropical blister for humid export markets
A second aluminum forming and sealing station added to the same platform.
Effervescent and hygroscopic tablets
Where the barrier is the product’s shelf life, not a cosmetic choice.
DPP-260H1 Blister Packaging Machine FAQ
The 260H1 uses a reinforced dual-cylinder sealing station with independent PID temperature zones, so pressure and heat stay even from the center of the 260 mm foil to the edges. That’s what keeps the seal consistent across every row in a multi-row layout.
A 260 mm width fits five or six plates a stroke where a 120 mm machine fits two or three. One machine, one set of tooling and one operator replace two, which is where the per-plate cost comes down. It only pays back if your plate layout fills the width.
For the 260H1, we use an upgraded High-Torque Industrial Servo System. This system is specifically tuned to handle the increased inertia of wide, heavy material rolls. It provides millimetric precision in material advancement, keeping pocket registration steady at 50 punches a minute.
Yes. The modular design of the 260H1 allows for the addition of a second tropical aluminum forming and sealing station. This makes it an ideal platform for products requiring the extra moisture protection of Tropical Blister packaging, often required for high-humidity export markets.
Routine maintenance is mostly mold cleaning and seal inspection, and the balcony-style open frame gives access to the production zone without reaching into the drive. Ask us for the maintenance schedule for your configuration.
Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Customers Also Interested In...
Send Us Your Plate Layout
A 260 mm width only pays back when your plate layout fills it. Send us a sample tablet or capsule and your current plate layout. We’ll tell you how many plates fit per stroke, and whether a 180 mm machine would do the same job for less.
- Direct from our factory
- Lead time confirmed in your quote
- Installation and training available
- Spare parts listed in your quote