DPH-380H Full-Servo Rotary Blister Packaging Machine

Eight servo axes, 320 × 380 mm forming area, 40 to 180 punches a minute

Your 260 mm machine is running two shifts and the packing room has no space for a second one. This one gives you a 320 × 380 mm forming area and eight independent servo axes under a single motion controller — no mechanical linkage chain to drift across a shift. It ships as a main unit, an auxiliary unit and a separate film rack, so it goes through a standard door.

1. Punch frequency: 40 to 180 a minute, 200 maximum

2. Forming area: 320 × 380 mm, the largest we supply

3. Forming depth: 16 mm. Deeper items need a flat-plate machine

4. Eight servo axes: driven from one motion controller, not a linkage chain

5. Power: 28 kW, three-phase five-wire

Is this the right machine for you?

✓ Yes, if…

✕ Buy something else if…

Technical specification

Feature

DPH-380H

What does it mean to you?

Punch frequency

40–180/min, 200 max

—

Output

Up to 45,000 plates/hour

Tell us your plate size and we’ll work it back

Forming area

320 × 380 mm

The largest we supply

Forming depth

≤16 mm

Rotary forming is shallow. Check your item height first

Stroke range

40–200 mm, fully adjustable

—

Air supply

0.4–0.7 MPa, 320 L/h max

—

Cooling water

0.1–0.25 MPa, 600 L/h max

Tap water or a chiller. You supply the connection

Installed power

28 kW max, three-phase five-wire, 60 Hz. Built to your U.S. supply; we confirm the voltage with your quote

Three live, one neutral, one earth

Wiring

Live ≥6 mm², earth ≥2.5 mm²

Give this to your electrician before delivery

Overall dimensions

5,280 × 1,600 × 1,800 mm

—

Main unit

2,200 × 1,600 × 1,400 mm, 2,400 kg

—

Auxiliary unit

2,080 × 1,600 × 1,800 mm, 2,600 kg

—

External film rack

1,000 × 600 × 800 mm

—

Total weight

5,000 kg

Check your floor loading

Model comparison

Model

Type

Punch freq.

Output

Forming area

Power

DPP-80

Flat plate

10–33 times/min

1,980 plates/hour

80 mm

2.4 kW

DPP-120H

Flat plate

10–35 times/min

2,400–4,200 plates/hour

120 mm

4.5 kW

DPP-150E

Flat plate

10–40 times/min

3,600–7,200 plates/hour

150 mm

6.5 kW

DPP-180H

Flat plate

10–50 times/min

4,800–9,600 plates/hour

180 mm

8.5 kW

DPP-260H1

Flat plate

10–50 times/min

6,000–12,000 plates/hour

 260 mm

9.5 kW

DPP-260H2

Rotary seal

60–130 times/min

Up to 28,800 plates/hour

260 mm

15 kW

DPH-260H

Rotary

80–150 times/min, 200 max

6,000–18,000 plates/hour

260 mm

24 kW

DPH-380H

Rotary

40–180 times/min, 200 max

Up to 45,000 plates/hour

380 mm

28 kW

Flat plate and rotary are two different machines, not two speeds of one. Flat plate stretches the film against a mold with positive air pressure and a mechanical punch. Rotary forms and seals on a drum with line contact. The difference shows up in material waste, changeover time and what the machine costs you per plate — the table above shows where each one fits.

Eight Servo Axes, One Motion Controller

Eight servo drives run from a single motion controller rather than a chain of mechanical linkages. At 180 punches a minute, a linkage chain accumulates timing error across a shift — that error shows up as drift in the cutting position hours after anyone last checked it. Independent axes don’t drift; they hold the position the controller gives them.

320 × 380 mm Forming Area

More rows across each cut than a 260 mm machine. That ratio is the whole reason to buy this one — and it’s also the reason not to. If your plate layout doesn’t fill the extra width, you’re paying for capacity the machine can’t reach. Send us your plate dimensions and we’ll lay it out on both widths.

16 mm Forming Depth

This is a limit, not a feature, and it’s worth stating plainly. Rolling film against a rotating drum gives it less dwell time than pressing it against a static plate, so it stretches less far. If your item is taller than 16 mm, a flat-plate machine is what you need. We’d rather say so here than at the factory acceptance test.

Alu-PVC and Alu-Alu on One Machine

Both materials run on this platform. Switching from Alu-PVC to Alu-Alu requires new molds (forming, sealing, and punching) and a new feeder plate. Cold-formed Alu-Alu forms more slowly than Alu-PVC on any machine — plan your output on the Alu-Alu figure if that’s what you run.

Ships as Three Units

Main unit, auxiliary unit and a separate film rack. Total footprint is 5,280 mm long, but nothing that arrives is wider than 1,600 mm or taller than 1,800 — which is what makes a machine this size possible to get into an existing room.

Separated Drive Compartment

Drives, belts and motors sit behind the working area rather than under it. On a machine this wide, that cuts line clearance time — there’s simply less surface in the production zone to wipe down.

Industry Applications

Multi-row plates on a wide web

A 320 × 380 mm forming area takes more rows across than a 260 mm machine. If your plate layout fills it, the per-unit packaging cost drops. If it doesn’t, the width returns nothing.

Single-SKU continuous production

One format running across shifts. Wide drums are heavier to swap, so this machine pays back on long runs rather than frequent changes.

Cold-formed Alu-Alu at volume

Alu-Alu costs several times what Alu-PVC does. At this width, the plate margin is a real line item rather than a rounding error.

Flat tablets and standard capsules

Items under 16 mm tall. That ceiling applies to every rotary machine, not just this one.

What changing over involves

A format set is four stations, not one part.

What changed

What you adjust

Roughly

Same format, new batch

Nothing

—

Plate layout changes

Rotary drums and cutters

15–45 minutes

Alu-PVC → Alu-Alu

New molds (forming, sealing, and punching) and a new feeder plate

15–45 minutes

Servo synchronization re-aligns the stations from the recipe, so the timing part is done on the screen. The drums still come off and go back on by hand — and a 380 mm drum is heavier than a 260 mm one.

A rotary machine trades changeover speed for running speed, and a wide one trades more of it. If you change format more than once a week, the width is working against you.

What to check before you buy

01

The tooling, not the machine

A format set covers four synchronized stations. Ask any supplier who designs the pocket layout, how long a new format takes to make, and what it costs. That's where a blister project succeeds or fails.

02

The feeder, before you order

An Alu-PVC universal feeder cannot run cold-formed Alu-Alu, and it cannot be converted afterwards. Ask which feeder you're being quoted and what it locks you out of.

03

Installation and training

Ask what's included and what costs extra. The answer varies more between suppliers than the machine price does.

Why Choose AIPAK?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

We Design the Pocket Around Your Product

Send us your tablet or capsule samples and tell us your foil. We design the pocket layout and specify the feeder before we quote, because an Alu-PVC universal feeder can’t be converted to Alu-Alu later.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

DPH-380H Rotary Blister Packaging Machine FAQ

How does the DPH-380H keep the seal even across a 380 mm web?

The sealing drum is supported at both ends and runs with balanced pressure across its width. Send us your foil and plate layout, and at the factory acceptance test we’ll show you the seal at the edges as well as the center.

Is the DPH-380H too fast for manual feeding?

Yes, manual feeding is impossible at these speeds. The 380H is always paired with our Advanced Dedicated Automatic Feeders (Vibration, Brush, or Planetary), which are electronically synced to the machine’s main servo. We also recommend adding camera inspection.

How do you handle vibration and noise on a machine this size?

The drives sit in a separate compartment behind the working area, and eight servo axes run from one motion controller instead of a mechanical linkage chain. That keeps vibration down at 180 punches a minute.

Is 380 mm right for me, or is 260 enough?

Work it out from your plate layout, not your output target. If your plate fits three rows across 260 mm and four across 380, the wider machine pays back. If it fits three across either, you’d be buying width you can’t fill. Send us your plate dimensions and we’ll lay it out both ways and tell you honestly.

What does the machine need from my plant?

28 kW three-phase five-wire, with live conductors at 6 mm² or above and earth at 2.5 mm² or above. Compressed air at 0.4 to 0.7 MPa, 320 liters an hour. Cooling water at 0.1 to 0.25 MPa, 600 liters an hour — tap water or a chiller. And 5,280 mm of length, though it arrives as three separate units.

Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send us your plate layout, not your output target

A 380 mm web only earns its cost if your plate fits more rows across it than across 260 mm. That’s an arithmetic question, and it’s one most buyers haven’t done.

Send us your plate dimensions and your item height. We’ll lay it out on both widths and tell you which one actually pays — including when the answer is the narrower machine.

  • Direct from our factory
  • Lead time confirmed in your quote
  • Installation and training available
  • Spare parts listed in your quote
Scroll to Top