APK-CS10 Case Sealer

The APK-CS10 folds the top flaps and tapes the case shut. It handles 5 to 10 cases a minute across the widest case range we build, on single-phase power. At 250 kg on four castors, you can move it to whichever line needs it.

  • Output— 5 to 10 cases per minute
  • Case size— 200×180×150 to 600×500×500 mm, our widest range
  • On castors— 250 kg, moves between lines

Direct from our factory | Lead time confirmed in your quote | Installation and training available | Spare parts listed in your quote

Is the APK-CS10 the right sealer for you?

✓ This is a fit if…

✕ Look elsewhere if…

Technical specification

Parameter

Value

What this means for you

Output

5 – 10 cases / min

Keeps ahead of both our case packers

Case length

200 – 600 mm

Widest range of any station on this line

Case width

180 – 500 mm

Side guides adjust on handwheels

Case height

150 – 500 mm

Top head adjusts on a handwheel

Seals

Top flaps only

The bottom is taped by the erector

Tape

2″ or 3″

—

Sealing success rate

 ≥99.9%

—

Changeover

Handwheel adjustment

No tools, no change parts

Power

60 Hz

Built to your local supply. We confirm the voltage and frequency with your quote

Compressed air

0.5 MPa

—

Air consumption

50 L / min

Six times less than the erector draws

Footprint

1,830 × 835 mm

Narrowest station on the line

Height

1,640 mm

—

Weight

About 250 kg, on four castors

Move it between lines without a forklift

Touchscreen

PLC touch screen

—

 

How It Fits With the Other Stations

Machine

What it does

Output

 

APK-CE6 Case Erector

Opens and bottom-tapes the case

1–6 cases/min

View →

APK-550 Pick & Place Case Packer

Loads bottles or cartons

Up to 24 cases/min

View →

APK-550 Side-Load Case Packer

Loads cartons

Up to 5 cases/min

View →

APK-CS10 Case Sealer

Closes and top-tapes

5–10 cases/min

You are here

APK-CP900 All-in-One

All three jobs in one frame

Up to 5 cases/min

View →

This is usually the last station bought and the first one people try to do by hand. A tape gun works fine at low volume. It stops working when the packer speeds up.

Top flap folding

The inner flaps fold first, then the outer ones, then the tape head runs the seam. The sequence is what keeps the case square. A case that arrives slightly out of square is folded back into shape rather than jammed.

Widest case range on the line

200 to 600 mm long, 180 to 500 wide, 150 to 500 tall. That is a wider range than either packer handles, which means this station rarely limits what case sizes you can run.

On castors

250 kg on four castors. If you run two lines and only need sealing on one at a time, you can move it rather than buy a second one.

Ideal Applications & Industries

Adding sealing to an existing line

Most brands buy the packer first and close cases with a tape gun. This is the machine that replaces that job.

Plants running two lines

One sealer on castors, moved between lines, instead of two fixed machines.

Contract packers with a wide case range

200 to 600 mm covers most client shippers without changing anything but a handwheel.

What changing over involves

What changed

What you adjust

Roughly

Same case, different product

Nothing

0 min

Case size changes

Handwheels on the side guides and top head

15-45 mins

Moving to another line

Unplug air and power, roll it across

15-45 mins

No change parts per case size. Nothing to buy, nothing to store.

Three things to check before you buy any sealer

01

Accuracy

Every case should come out square, with the top seam properly taped. Ours seals at 99.9% or better. Ask any supplier for their number and how it's checked at the factory acceptance test.

02

The manual

A clear English manual is what gets your operator running in a week instead of a month. Ask to see a sample page before you order.

03

Installation and training

Installed, commissioned, and your people taught to run it. Ask what's included and what costs extra.

Why Choose AIPAK?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

We Check Your Case Before We Quote

Send us your case dimensions and what goes in it. We check them against the machine before we quote, so a size problem shows up now, not at installation.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Questions About the APK-CS10 Case Sealer

Does it seal the bottom of the case as well?

No. This machine folds and tapes the top. The bottom is taped by the case erector when the case is formed. If you only buy the sealer, you’ll need another way to close the bottom.

How much does a case sealer cost?

It depends on your case size range. Send us the dimensions and we’ll price it.

How long is the lead time?

It depends on the configuration. We confirm the lead time in writing with your quote, before you order.

Can I move it between lines?

Yes. It’s 250 kg on four castors, with air and power as the only connections. Plants running two lines often buy one sealer rather than two.

What tape does it use?

Standard 2-inch or 3-inch tape you can buy locally. We don’t supply consumables.

Does it run on US power?

Yes. We build to your local supply and confirm the voltage and frequency with your quote.

Are your machines electrically certified for the US?

Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send us your case dimensions

Case size decides whether this machine fits, and it fits a wider range than anything else on this line. What we also need to know is whether you already have a way of closing the case bottom — if not, you need the erector too.

Send your floor dimensions and we’ll do the layout and space calculation free.

Scroll to Top