Home » APK-550 Side-Load Case Packer
APK-550 Side-Load Case Packer
The APK-550 stacks cartons and pushes the whole stack into the case in one stroke. It runs up to 5 cases a minute on 220V power. If you pack cartoned products and don’t need to handle bottles, this costs less than a servo pick-and-place machine and does the same job.
- Output— up to 5 cases per minute
- Packs— cartons only, cases from 220×150×120 mm
- Power — 4.5 kW, a lighter supply than the pick-and-place model
Direct from our factory | Lead time confirmed in your quote | Installation and training available | Spare parts listed in your quote
Is the APK-550 Side-Load the right packer for you?
✓ This is a fit if…
- You pack cartoned products into shipping cases
- Your cases are 220 × 150 × 120 to 600 × 400 × 400 mm
- You need up to 5 cases a minute
- Your cartons are rigid enough to stack and push
✕ Look elsewhere if…
- You pack bottles → bottles fall over when pushed. You need the APK-550 Pick & Place
- You need more than 5 cases a minute → see the APK-550 Pick & Place
- Your cases are over 600 × 400 × 400 mm → see the APK-CP900 All-in-One, up to 650 × 450 × 400
Technical specification
Parameter | Value | What this means for you |
Actual output | Up to 5 cases / min, depending on pack pattern | Depends on how many pushes per case |
What it packs | Cartons only | Bottles need the APK-550 Pick & Place |
Case size min | 220 × 150 × 120 mm | The smallest case in our range |
Case size max | 600 × 400 × 400 mm | Larger? See the APK-CP900 at 650 × 450 × 400 |
Power | 4.5 kW | Built to your local supply. We confirm the voltage and frequency with your quote |
Compressed air | 0.6 MPa, under 1 m³/h | Your existing compressor is likely enough |
Footprint | 2,200 × 1,600 × 2,400 mm | Add clearance for case infeed and maintenance |
Weight | 1,500 kg | No special foundation |
Frame | Aluminium alloy and stainless steel | Open stations, easy to clean |
Loading | Stainless steel pusher on air cylinders | Fewer moving parts than a servo head |
Side-Load Pusher
Cartons are stacked, then the whole stack is pushed into the case in one stroke. Stainless steel pusher and guide plates, with air cylinders behind them. Fewer moving parts than a servo head, and less to go wrong. It works on cartons, not bottles.
Oil-free vacuum pump
A rotary vane pump with self-lubrication. No oil mist near your product, low noise, and simple to maintain.
Detection at every station
No case, no product, stack overload, case out of position. Any of these stops the machine before it jams. You get a message on screen, not a pile of damaged cases.
Ideal Applications & Industries
Cartoned supplements
Sachets, stick packs and blister cards already in a retail carton. Stacked and pushed into the shipper in one motion.
Brands on a lighter power supply
4.5 kW against 7.5 kW for the pick-and-place model. Worth knowing before you check your panel.
One or two shifts of cartons
Up to 5 cases a minute keeps pace with most cartoners. If you need more, the pick-and-place model goes faster.
What changing over involves
What changed | What you adjust | Roughly |
Same case, different product | Recipe on screen | Ask us |
Case size changes slightly | Handwheel adjustment at each station | About 1 min per station |
Case size changes completely | Handwheels and guide plates | Ask us |
Case size changes on handwheels and self-locking levers. There are no change parts to buy per case size, and none to store.
One honest note: the number above is for the packer. On a full line the erector, the sealer and the conveyor all adjust too. Ask us for the line number, not just this one.
Three things to check before you buy any packer
Accuracy
Every case leaves with the right count inside. Ask any supplier what their pack success rate is and how it's verified at FAT. Ours is 99% on packing and 99.9% on case appearance.
The manual
A clear English manual is what gets your operator running in a week instead of a month. Ask to see a sample page before you order.
Installation and training
Installed, commissioned, and your people taught to run it. Ask what's included and what costs extra. The answer varies more between suppliers than the machine price does.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Check Your Case Before We Quote
Send us your case dimensions and what goes in it. We check them against the machine before we quote, so a size problem shows up now, not at installation.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Questions About the APK-550 Side-Load
No. It pushes cartons into the case, and bottles fall over when pushed. If you bottle, you need the APK-550 Pick & Place.
If you only pack cartons, side-load does the job with fewer moving parts, less power (4.5 kW against 7.5 kW) and a lower price. Pick-and-place earns its cost when you pack bottles or need more than 5 cases a minute.
About a minute per station on handwheels. There are no change parts to buy or store. On a full line the erector and sealer adjust too — ask us for the line number.
2,200 × 1,600 mm for the packer, plus clearance for loading cases and for maintenance. Send us your floor plan and we’ll return a layout drawing.
Yes. We build to your local supply and confirm the voltage and frequency with your quote.
Installation and operator training are quoted with the machine. A kit of wear parts ships with it, and every part, plus the lead time for anything outside the kit, is listed in your quote in writing.
Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.
Customers Also Interested In...
Send us your case and your product. We'll send back a configuration.
Tell us what you pack, what your case looks like and how many you need a minute. We’ll come back with a machine, a layout drawing and a price. If a case packer isn’t what you need yet, we’ll tell you that instead.
Send your floor dimensions and we’ll do the layout and space calculation free.