Home » APK-CE6 Case Erector
APK-CE6 Case Erector
The APK-CE6 takes flat corrugated blanks from the magazine, opens them, folds the bottom flaps and tapes them shut. It feeds 1 to 6 erected cases a minute to whatever packs them. If someone on your line is folding cases by hand, this is the station that replaces them.
- Output— 1 to 6 cases per minute
- Case size— 280×150×150 to 450×400×400 mm
- Changeover— about 1 minute, handwheel
Direct from our factory | Lead time confirmed in your quote | Installation and training available | Spare parts listed in your quote
Is the APK-CE6 the right case erector for you?
✓ This is a fit if…
- Your cases are 280×150×150 to 450×400×400 mm
- You need 1 to 6 erected cases a minute
- You use OPP or kraft tape, 38 or 50 mm wide
- You have single-phase power and 0.5 MPa compressed air
- You change case size more than once a week
✕ Look elsewhere if…
- Your cases are longer than 450 mm → outside the range. Send us the dimensions and we'll tell you honestly
- Your cases are shorter than 280 mm → also outside. Ask us before you assume
- You use hot melt glue, not tape → this machine tapes. Tell us before you quote
- You erect fewer than 200 cases a day → folding by hand still costs you less. Buy the packer first
Technical specification
Parameter | Value | What this means for you |
Output | 1 – 6 cases / min | Keeps ahead of both our case packers |
Case length | 280 – 450 mm | Longer cases? Tell us the size |
Case width | 150 – 400 mm | — |
Case height | 150 – 400 mm | — |
Magazine capacity | 100 blanks | How often an operator reloads |
Blank material | Standard corrugated board | No special blank needed |
Tape | OPP or kraft, 38 or 50 mm | Buy tape locally, not from us |
Erecting success rate | ≥99.9% | About one reject in a thousand cases |
Changeover | About 1 minute, handwheel | No tools, no change parts to store |
Power | 60 Hz | Built to your local supply. We confirm the voltage and frequency with your quote |
Compressed air | 0.5 MPa, 300 L/min | Check your compressor — this draws more air than the sealer |
Footprint | 2,000 × 1,900 mm | Deeper than most stations. Allow for magazine loading |
Height | 1,450 mm | Below eye level, easy to supervise |
Weight | About 600 kg | No special foundation |
How It Fits With the Other Stations
Machine | What it does | Output |
|
APK-CE6 Case Erector | Opens and bottom-tapes the case | 1–6 cases/min | You are here |
APK-550 Pick & Place Case Packer | Loads bottles or cartons | Up to 24 cases/min | |
APK-550 Side-Load Case Packer | Loads cartons | Up to 5 cases/min | |
APK-CS10 Case Sealer | Closes and top-tapes | 5–10 cases/min | |
APK-CP900 All-in-One | All three jobs in one frame | Up to 5 cases/min |
Buying all three stations? The APK-CP900 does erecting, packing and sealing in one frame, in less floor space. It runs slower — up to 5 cases a minute. Worth comparing before you buy three machines.
Magazine and blank pick-up
Flat blanks sit in a magazine at the front of the machine. The pick-up opens each one and squares it before the flaps are folded. An operator loads the magazine and does nothing else at this station.
Bottom flap folding and taping
The bottom flaps fold in sequence, then the tape head runs across the seam. Tape is OPP or kraft, 38 or 50 mm wide. You buy it locally.
Handwheel size change
Case size changes on handwheels. About a minute, no tools, nothing to store on a shelf. If you run several case sizes a week, this is the number that matters more than throughput.
Touchscreen with counting and alarms
The screen shows output count, running speed and any fault. Faults stop the machine and say why. There’s also an emergency stop.
Ideal Applications & Industries
Bottled supplements
A bottling line at 60 bottles a minute, 12 to a case, needs 5 cases a minute. This machine erects up to 6.
Cartoned products
Sachets and stick packs in retail cartons, packed into shippers.
Contract packers running several case sizes
A one-minute handwheel changeover matters more here than peak throughput. You change case size between clients, not between shifts.
What changing over involves
| What changed | What you adjust | Roughly |
| Same case, different product | Nothing on this machine | 0 min |
| Case size changes | Handwheels at the magazine and the folding station | About 1 min |
| Tape width changes (38 ↔ 50 mm) | Tape head | Ask us |
There are no change parts to buy per case size, and none to store. On a full case packing line the packer and sealer adjust too — ask us for the line number, not just this one.
Three things to check before you buy any case erector
Accuracy
Every case should come out square, with the bottom seam properly taped. Ours erects at ≥99.9% success. Ask any supplier for their number and how it's verified at FAT.
The manual
A clear English manual is what gets your operator running in a week instead of a month. Ask to see a sample page before you order.
Installation and training
Installed, commissioned, and your people taught to run it. Ask what's included and what costs extra.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Check Your Case Before We Quote
Send us your case dimensions and what goes in it. We check them against the machine before we quote, so a size problem shows up now, not at installation.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Questions About the APK-CE6 Case Erector
It depends on your case size range and your tape width. Send us the dimensions and we’ll price it. We don’t publish a list price because the same machine varies with configuration.
It depends on the configuration. We confirm the lead time in writing with your quote, before you order.
OPP or kraft, 38 or 50 mm wide. Standard tape you can buy locally. We don’t supply consumables.
Yes. We build to your local supply and confirm the voltage and frequency with your quote.
0.5 MPa at 300 liters a minute. That’s noticeably more than the sealer draws, so check your compressor before you add both stations.
About a minute on handwheels. No tools and no change parts.
Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Customers Also Interested In...
Send us your case dimensions.
Case length, width and height decide whether this machine fits. Tape width and your cases-per-day decide whether it’s worth buying at all. Send us both and we’ll tell you honestly.
If you erect fewer than a couple of hundred cases a day, we’ll say so. Buy the packer first.
Send your floor dimensions and we’ll do the layout and space calculation free.