Home » APK-900 All-in-One Case Erector, Packer and Sealer
APK-900 All-in-One Case Erector, Packer and Sealer
The APK-900 erects the case, packs it, inserts dividers and the packing slip, then tapes it shut. One machine instead of three, in 4,050 × 2,450 mm of floor. If your packing room is full and you’re adding case packing, this is the option that fits.
- Three machines in one— erecting, packing and sealing in a single frame
- Dividers and packing slip— both inserted automatically
- Case size— up to 650 × 450 × 400 mm, the largest in our range
Direct from our factory | Lead time confirmed in your quote | Installation and training available | Spare parts listed in your quote
Is the APK-900 the right packer for you?
✓ This is a fit if…
- Your packing room has no space for three separate machines
- Your cases need dividers between layers
- You put a packing slip inside every case
- Your cases run up to 650 mm long
- You need up to 5 cases a minute
✕ Look elsewhere if…
- You need more than 5 cases a minute → separate machines run faster. See the APK-550 Pick & Place
- You already own an erector or a sealer → buying an all-in-one means replacing them. Buy the packer on its own instead
- You pack bottles → this machine is built for cartons. See the APK-550 Pick & Place
Technical specification
Parameter | Value | What this means for you |
Output | Up to 5 cases / min | Depends on how many cartons go in each case |
What it packs | Cartons | Bottles need the APK-550 Pick & Place |
Also inserts | Top and bottom dividers, packing slip | No second station for either |
Case size min | 300 × 180 × 130 mm | Smaller cases? See the APK-550 Side-Load |
Case size max | 650 × 450 × 400 mm | The largest in our range |
Pick-up | Servo X/Y axes | Cartons are arranged and stacked before they go in |
Sealing | Clear tape | — |
Control | industrial PLC and touchscreen | — |
Power | 7.5 kW | Built to your local supply. We confirm the voltage and frequency with your quote |
Compressed air | 0.6 MPa, under 1 m³/h | Your existing compressor is likely enough |
Footprint | 4,050 × 2,450 mm, 2,700 mm high | One machine instead of three |
Weight | 2,500 kg | Check your floor loading |
Divider insertion
Top and bottom dividers are placed automatically. If your bottles or jars need separating between layers, this saves an operator standing at the line doing it by hand.
Packing slip insertion
The packing slip goes in before the case is sealed. No second station, and no case leaving without its paperwork.
Cartons Arranged, Then Picked
Cartons are lined up and stacked in the pattern you need before they reach the case, then picked by a head on servo X and Y axes and set in. Arranging first is what keeps the packing speed up.
Detection at every station
No case, no product, stack overload, case out of position. Any of these stops the machine before it jams. You get a message on screen, not a pile of damaged cases.
Ideal Applications & Industries
Cartoned supplements
Sachets, stick packs and blister cards in retail cartons, packed into shippers with the packing slip already inside.
Cases that need dividers
Two layers of cartons with a divider between them, and one on the top and bottom. Placed by the machine instead of by hand.
Packing rooms short on floor
If there’s no room for an erector, a packer and a sealer in a row, this does all three in one frame.
What changing over involves
What changed | What you adjust | Roughly |
Same case, different product | Recipe on screen | Ask us |
Case size changes slightly | Handwheels and the case magazine | Ask us |
Case size changes completely | Handwheels, magazine and pick pattern on screen | Ask us |
Case size changes on handwheels and self-locking levers. There are no change parts to buy per case size, and none to store.
One honest note: the number above is for the packer. On a full line the erector, the sealer and the conveyor all adjust too. Ask us for the line number, not just this one.
Three things to check before you buy any packer
Accuracy
Every case leaves with the right count inside. Ask any supplier what their pack success rate is and how it's verified at FAT. Ours is 99% on packing and 99.9% on case appearance.
The manual
A clear English manual is what gets your operator running in a week instead of a month. Ask to see a sample page before you order.
Installation and training
Installed, commissioned, and your people taught to run it. Ask what's included and what costs extra. The answer varies more between suppliers than the machine price does.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Check Your Case Before We Quote
Send us your case dimensions and what goes in it. We check them against the machine before we quote, so a size problem shows up now, not at installation.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Questions About the APK-900
It’s built for cartons. If you pack bottles, the APK-550 Pick & Place lifts them with vacuum cups and sets them in upright.
A divider on the bottom, between layers if you need one, and on top, plus the packing slip. All placed by the machine before the case is taped shut.
Up to 5 cases a minute. The real number depends on how many cartons go in each case. Send us your carton size and count per case and we’ll tell you the rate for your job.
4,050 × 2,450 mm, and 2,700 mm high. Add clearance for loading blanks and for maintenance access. Send us your floor plan and we’ll return a layout drawing.
Yes. We build to your local supply and confirm the voltage and frequency with your quote.
It depends on the configuration. We confirm the lead time in writing with your quote, before you order.
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.
Customers Also Interested In...
Send us your case and your product. We'll send back a configuration.
Tell us what you pack, what your case looks like and how many you need a minute. We’ll come back with a machine, a layout drawing and a price. If a case packer isn’t what you need yet, we’ll tell you that instead.
Send your floor dimensions and we’ll do the layout and space calculation free.