Home » APK-CS10 Case Sealer
APK-CS10 Case Sealer
The APK-CS10 folds the top flaps and tapes the case shut. It handles 5 to 10 cases a minute across the widest case range we build, on single-phase power. At 250 kg on four castors, you can move it to whichever line needs it.
- Output— 5 to 10 cases per minute
- Case size— 200×180×150 to 600×500×500 mm, our widest range
- On castors— 250 kg, moves between lines
Direct from our factory | Lead time confirmed in your quote | Installation and training available | Spare parts listed in your quote
Is the APK-CS10 the right sealer for you?
✓ This is a fit if…
- Your cases are 200×180×150 to 600×500×500 mm
- You need 5 to 10 cases a minute
- You have single-phase power and 0.5 MPa compressed air
- You want a station you can move between lines
- You already run a packer and close cases by hand
✕ Look elsewhere if…
- Your cases are over 600 mm long → outside the range. Send us the dimensions
- You use hot melt glue, not tape → this machine tapes
- You need more than 10 cases a minute → tell us your rate and we'll say what's possible
- You need bottom sealing too → this machine seals the top. The APK-CE6 erector tapes the bottom
- You seal fewer than a couple of hundred cases a day → a hand tape gun still costs you less
Technical specification
Parameter | Value | What this means for you |
Output | 5 – 10 cases / min | Keeps ahead of both our case packers |
Case length | 200 – 600 mm | Widest range of any station on this line |
Case width | 180 – 500 mm | Side guides adjust on handwheels |
Case height | 150 – 500 mm | Top head adjusts on a handwheel |
Seals | Top flaps only | The bottom is taped by the erector |
Tape | 2″ or 3″ | — |
Sealing success rate | ≥99.9% | — |
Changeover | Handwheel adjustment | No tools, no change parts |
Power | 60 Hz | Built to your local supply. We confirm the voltage and frequency with your quote |
Compressed air | 0.5 MPa | — |
Air consumption | 50 L / min | Six times less than the erector draws |
Footprint | 1,830 × 835 mm | Narrowest station on the line |
Height | 1,640 mm | — |
Weight | About 250 kg, on four castors | Move it between lines without a forklift |
Touchscreen | PLC touch screen | — |
How It Fits With the Other Stations
Machine | What it does | Output |
|
APK-CE6 Case Erector | Opens and bottom-tapes the case | 1–6 cases/min | |
APK-550 Pick & Place Case Packer | Loads bottles or cartons | Up to 24 cases/min | |
APK-550 Side-Load Case Packer | Loads cartons | Up to 5 cases/min | |
APK-CS10 Case Sealer | Closes and top-tapes | 5–10 cases/min | You are here |
APK-CP900 All-in-One | All three jobs in one frame | Up to 5 cases/min |
This is usually the last station bought and the first one people try to do by hand. A tape gun works fine at low volume. It stops working when the packer speeds up.
Top flap folding
The inner flaps fold first, then the outer ones, then the tape head runs the seam. The sequence is what keeps the case square. A case that arrives slightly out of square is folded back into shape rather than jammed.
Widest case range on the line
200 to 600 mm long, 180 to 500 wide, 150 to 500 tall. That is a wider range than either packer handles, which means this station rarely limits what case sizes you can run.
On castors
250 kg on four castors. If you run two lines and only need sealing on one at a time, you can move it rather than buy a second one.
Ideal Applications & Industries
Adding sealing to an existing line
Most brands buy the packer first and close cases with a tape gun. This is the machine that replaces that job.
Plants running two lines
One sealer on castors, moved between lines, instead of two fixed machines.
Contract packers with a wide case range
200 to 600 mm covers most client shippers without changing anything but a handwheel.
What changing over involves
What changed | What you adjust | Roughly |
Same case, different product | Nothing | 0 min |
Case size changes | Handwheels on the side guides and top head | 15-45 mins |
Moving to another line | Unplug air and power, roll it across | 15-45 mins |
No change parts per case size. Nothing to buy, nothing to store.
Three things to check before you buy any sealer
Accuracy
Every case should come out square, with the top seam properly taped. Ours seals at 99.9% or better. Ask any supplier for their number and how it's checked at the factory acceptance test.
The manual
A clear English manual is what gets your operator running in a week instead of a month. Ask to see a sample page before you order.
Installation and training
Installed, commissioned, and your people taught to run it. Ask what's included and what costs extra.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Check Your Case Before We Quote
Send us your case dimensions and what goes in it. We check them against the machine before we quote, so a size problem shows up now, not at installation.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Questions About the APK-CS10 Case Sealer
No. This machine folds and tapes the top. The bottom is taped by the case erector when the case is formed. If you only buy the sealer, you’ll need another way to close the bottom.
It depends on your case size range. Send us the dimensions and we’ll price it.
It depends on the configuration. We confirm the lead time in writing with your quote, before you order.
Yes. It’s 250 kg on four castors, with air and power as the only connections. Plants running two lines often buy one sealer rather than two.
Standard 2-inch or 3-inch tape you can buy locally. We don’t supply consumables.
Yes. We build to your local supply and confirm the voltage and frequency with your quote.
Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Customers Also Interested In...
Send us your case dimensions
Case size decides whether this machine fits, and it fits a wider range than anything else on this line. What we also need to know is whether you already have a way of closing the case bottom — if not, you need the erector too.
Send your floor dimensions and we’ll do the layout and space calculation free.