WZH-120-III Blister Cartoning Machine

Blister Plates into Cartons, with Automatic Leaflet Folding

Someone on your line is counting blister plates and folding leaflets by hand. The WZH-120-III does both at up to 120 cartons a minute. You set the number of plates per carton on the screen — no tooling change to go from two plates to three.

1. Speed: 30 to 120 cartons per minute

2. Plates per carton: set on the touchscreen, not by changing parts

3. Power: single-phase, 1.5 kW

Is this the right machine for you?

✓ Yes, if…

✕ Buy something else if…

Set the plate count on screen

Two blister plates today, three next month. You change the number on the touchscreen rather than swapping feeder parts. On a line running several SKUs, that saves a parts change every time the product changes.

Leaflet folding, 1 to 4 folds

The folder takes an unfolded leaflet up to 250 × 180 mm and folds it once, twice, three or four times. It feeds into the carton with the product in the same push.

It rejects, it doesn't just alarm

A carton missing its blister or its leaflet is removed from the line automatically. The screen shows what happened and where.

Single-Phase Power

This machine and the WZH-120P are the only cartoners in our range that run on single-phase supply. If your packing area has no three-phase, that decides your options before anything else does.

Technical specification

ParameterValueWhat it means for you
Encasing speed30–120 cartons/minActual speed depends on your carton and plate count
What it packsALU-PVC and ALU-ALU blister platesBottles or sachets? Different machine
Carton size70-180 × 35-85 × 14-50 mmSame window as every model in our range
Carton board250–350 g/m²Depends on carton size
Unfolded leaflet80-250 × 90-180 mmThe 180 and above take up to 300 mm
Folds1–4—
Air pressure≥0.6 MPaBelow this, cartons don’t suck down and rejects don’t kick out
Air consumption120–160 L/minSize your compressor above this
Power1.5 kW, single-phase, 60 HzBuilt to your U.S. supply; we confirm the voltage with your quote
Dimensions3,155 × 1,260 × 1,770 mmThe most compact cartoner in our range
Weight1,400 kg—

Model comparison

Model

Speed

What it packs

Carton L×W×H (mm)

Leaflet unfolded

Power

WZH-120-III

30–120

Blister packs

70-180 × 35-85 × 14-50

80-250 × 90-180

Single-phase, 1.5 kW

WZH-120P

30–120

Bottles, with infeed unscrambling

70-180 × 35-85 × 14-50

80-250 × 90-180

Single-phase, 1.5 kW

WZH-120D

30–120

Sachets and pouches, 1–12 per carton

70-180 × 35-85 × 14-50

80-250 × 90-180

Three-phase, 4 kW

WZH-180

180

Blisters, tubes, trays, bottles, sachets

70-165 × 35-85 × 14-50

80-300 × 90-180

Three-phase, 4.5 kW

WZH-260

260

Blisters, tubes, trays, sachets

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5 kW

WZH-260P

260

Bottles, with infeed unscrambling

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5 kW

WZH-320

320

Blisters, bottles, tubes, sachets

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5.8 kW

WZH-450

450

Blisters, tubes, trays, sachets

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5 kW

WZH-600

600

Blisters, bottles, sachets · full servo

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 15 kW

Two things decide the model, and speed is only the second one.

What you pack comes first. Blisters, bottles and sachets each need a different feeder at the infeed. In the 120 series that is three separate machines. Above 120 the machines are more general, except the 260P, which is built for bottles.

Carton size is almost the same across the range. Every model takes a carton 70 to 180 mm long, except the WZH-180, which stops at 165 mm. Only the width narrows slightly above 180 cartons a minute, from 85 to 80 mm. So you do not lose carton flexibility by buying speed.

Industry Applications

Supplement blisters

Two or three plates per carton with a leaflet. The most common job this machine does.

ALU-ALU packs for moisture-sensitive products

Both ALU-PVC and ALU-ALU run on the same feeder.

Multi-SKU plants

Plate count changes on screen, so switching between a 2-plate and a 3-plate SKU does not mean a tooling change.

Changeover

Throughput sells machines. Changeover decides what you actually produce in a week.

What changed

What you adjust

Roughly

Same carton, new batch

Recipe on the screen

A few minutes

Carton length or width

Handwheels only — no parts to change

15–30 minutes

Carton or product height

The pusher head and pusher block must be swapped

15–30 minutes

Product format changes

The feeder at the infeed

15–30 minutes

Closing style (tuck-in → glue)

Not a changeover. That is a rebuild

—

Length and width are a handwheel. Height means changing the pusher. A different product means a different feeder. A different closing style means a different machine.

What to check before you buy

01

The five questions any supplier should ask you

What goes in the carton and how many. Carton dimensions and closing style. Leaflet format and whether it arrives folded. What feeds the machine upstream. Target speed. If a supplier quotes you without these, the machine that arrives will not fit the line it was bought for.

02

Carton sizing — where most projects go wrong

Manually packed cartons are usually a snug fit around the product. An automated pusher needs clearance. Send us both your product and carton dimensions. We will tell you before you order whether your existing carton runs, or needs modifying — rather than after it has been printed in quantity.

03

The documentation

Operating and maintenance manuals in English, electrical schematics, a spare parts list with part numbers and prices, and a signed FAT report before the machine ships. Ask any supplier to show you a sample manual page before you order.

Why Choose AIPAK?

One Point of Contact

You deal with us for the machine, the installation and the service call. Custom feeders, closing configurations and layout changes go through the engineers who build it.

Your Carton Checked Before You Order

Send us your carton and product dimensions. We tell you before you order whether your carton runs as it is or needs changing, not after it has been printed in quantity.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

WZH-120 III Cartoning Machine FAQ

How many blister plates can go in one carton?

You set it on the touchscreen. Two, three, four — whatever your carton holds. No parts to change.

Can this machine pack bottles or sachets?

No. The feeder at the infeed is built for blister plates. Bottles go on the WZH-120P, sachets on the WZH-120D. Same carton range, different feeders.

Can it be built for hot-melt glue sealing?

Yes, when specified at the order stage. Glue sealing uses a different mechanical station from tuck-in, so the machine is built one way or the other. It is not something that can be added later without rebuilding the sealing section.

Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How long is the lead time?

We confirm the lead time in writing with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send us your carton and your product

Carton dimensions and product dimensions together decide the machine. Send both and we will come back with a configuration, a layout drawing and a price. If a cartoner is not what you need yet, we will tell you that instead.

  • Direct from our factory

  • Lead time confirmed in your quote

  • Installation and training available

  • Spare parts listed in your quote

Scroll to Top