CGN-208X Semi-Automatic Liquid Capsule Filling Machine

The CGN-208X fills oils and liquids into hard capsules using a dosing pump. It’s for small runs and product trials. For full production of oil-filled products, most supplement makers choose softgels.

1. Pump dosing for oils and liquids

2. Horizontal pneumatic locking

3. Capsule sizes #000 to #4

Direct from our factory | Lead time confirmed in your quote | Installation and training available | Spare parts listed in your quote

Is the CGN-208X the right machine for you?

✓ It's a fit if…

✕ Look elsewhere if…

Technical specification

Specification

CGN-208X

What it means for you

Dosing

Dosing pump

Made for oils and liquids, not powder

Fill volume

Set on the pump

You set volume, not speed

Feed speed

Fixed

 

Locking

Horizontal, pneumatic

Capsules are locked flat, so liquid doesn’t spill before the cap seats

Control

Touchscreen

 

Output

12,000 – 24,000 pcs/h

 

Capsule sizes

#000, #00, #0, #1, #2, #3, #4

 

Qualified rate

≥ 98%

 

Power

60 Hz

Built to your U.S. supply; we confirm the voltage with your quote

Compressed air

0.7 MPa, 0.03 m³/min

 

Vacuum pump

40 m³/h, supplied

 

Dimensions

1,130 × 700 × 1,600 mm

 

Net weight

400 kg

 

Compare the CGN-208 Series

Five models, one frame. What changes is what they fill, how they lock and how fast they run.

Model

Output (capsules/hour)

Capsule sizes

Locking

Best for

 

CGN-208D

10,000–25,000

#0–#4

Vertical, foot pedal

Free-flowing powders on a tight budget, moving off manual boards

View →

CGN-208D1

12,000–24,000

#000–#4

Horizontal, pneumatic

Fine or light powders, and repeat batches set on a touchscreen

View →

CGN-208D2

38,000–43,000

#000–#4

Horizontal, pneumatic

Powder products that have outgrown a single-head machine

View →

CGN-208S

12,000–24,000

#000–#4

Horizontal, pneumatic

Coated time-release pellets, and powder on the same machine

View →

CGN-208X

12,000–24,000

#000–#4

Horizontal, pneumatic

Oil and liquid products in trials and small runs

View →

Still not sure? Send us your product and daily output, and we’ll tell you which model fits.

Pump Dosing

The fill volume is set on the dosing pump. Feed speed is fixed, so you set volume, not speed.

Horizontal Locking

Capsules are locked flat, so liquid doesn’t spill before the cap seats. Liquid-filled hard capsules usually also need band sealing, which is a separate machine — ask us about it.

Touchscreen Control

Vacuum, capsule feeding and filling are started from the touchscreen, with an English interface.

Automatic Capsule Separation

After each mold is loaded, a separation motor turns it under vacuum so the capsules open — no turning the mold by hand.

CGN-208X Semi-automatic Capsule Filling Machine Industry Applications

Oil-Based Supplements

Fish oil, vitamin E and other oil-based supplements, filled into hard capsules for trials and small runs.

New Liquid Formulas

Try a liquid or oil formula in hard capsules before you commit to softgel tooling.

Pilot Batches

Short runs for samples and market tests, with ready-made capsules and no gel preparation.

Liquid-Filled Hard Capsules (LFHC)

An alternative to softgel encapsulation for oils and suspensions, without the gelatin shell manufacturing step.

What Changes When You Switch Products

There’s no single changeover time. It depends on what you’re changing.

What you’re changing

What you do

About how long

A new product, same capsule size

Take off the mold, clean the dosing pump and its lines, and let them dry. Then set the fill volume for the new liquid.

15–30 minutes

A new fill volume, same product

Set a new volume on the dosing pump. No parts to change.

A few minutes

A new capsule size (#000 to #4)

Change the mold and the sowing parts for that size: sowing tube, capsule comb, pressing head and orientation device.

15–30 minutes

Cleaning counts as downtime too. Tell us which products and capsule sizes you plan to run, and we’ll supply the parts for each size with the machine.

What to check before you buy

01

Fill Accuracy

Ask for fill weights from a test run on your own powder, not a sample powder. That's the only number that tells you how your product will fill.

02

Operating Manual

The machine ships with an operating manual in English, and the touchscreen models have an English interface.

03

Commissioning and Training

Ask who sets the machine up and trains your operator, and what it costs. Our answer is in your quote.

Why Choose AIPAK?

One Point of Contact

One engineer handles your machine from quote to commissioning, so you’re not chasing several people for one answer.

We Run Your Powder Before You Order

Send us your powder and your capsules. We’ll fill them on the machine and send you the video and the fill weights.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

CGN-208X: Comprehensive Technical FAQ

How is the fill volume set?

On the dosing pump. The feed speed is fixed, so you set volume, not speed. Tell us your liquid and fill volume, and we’ll confirm the pump with your quote.

Do liquid-filled hard capsules need sealing?

Usually, yes. Locking holds the cap on, but most liquid-filled capsules are also band-sealed to stop leaks over shelf life. Ask us about sealing when you request a quote.

CGN-208X or a softgel machine — which should I choose?

For trials and small runs, the 208X uses ready-made capsules and needs no gel preparation or drying room. For production volumes of oil-filled products, softgels are the usual route.

Do I have to declare a capsule filling machine when importing to the U.S.?

Yes. Under U.S. federal rules, a capsule filling machine counts as an encapsulating machine, and its import must be declared to the DEA on Form 452 before it arrives. We supply the machine details you need for the filing. Confirm the exact requirements with your customs broker.

Do your machines meet U.S. electrical certification requirements?

Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.

Customers Also Interested In...

Send Us Your Powder and Capsule Size

Tell us what you’re filling, your capsule size and how many capsules you need a day. An engineer replies within one business day with the model that fits and why.

  • Direct from our factory
  • Lead time confirmed in your quote
  • Installation and training available
  • Spare parts listed in your quote
Scroll to Top