CGN-208D1 Semi-Automatic Capsule Filling Machine
The CGN-208D1 fills powders and small granules into sizes #000 to #4 at 12,000 to 24,000 capsules an hour. It locks capsules flat with pneumatic cylinders, so fine powder stays in the body, and runs from a touchscreen with an English interface.
1. 12,000–24,000 capsules/hour
2. Capsule sizes #000 to #4
3. Horizontal pneumatic locking; Siemens PLC and touchscreen
Direct from our factory | Lead time confirmed in your quote | Installation and training available | Spare parts listed in your quote
Is the CGN-208D1 the right machine for you?
✓ It's a fit if…
- You fill dry powders or small granules, including fine or light powders
- You need 12,000 to 24,000 capsules an hour
- You use sizes #000 to #4
✕ Look elsewhere if…
- You need more than 24,000 capsules an hour → the CGN-208D2
- You fill coated pellets → the CGN-208S
- You fill liquids or oils → the CGN-208X
- Your powder is sticky or damp → send us a sample first
Technical specification
| Specification | CGN-208D1 | What it means for you |
| Output | 12,000–24,000 capsules/hour (one mold set) | Depends on capsule size and operator speed |
| Capsule sizes | #000, #00, #0, #1, #2, #3, #4 | Covers the large sizes supplements often use |
| Capsule separation | Automatic, by separation motor | No turning the mold by hand |
| Materials | Dry powders and small granules | Not for sticky or damp powders |
| Locking | Horizontal, pneumatic | Cover, lock and eject run in one cycle |
| Control | Siemens PLC, touchscreen (English/Chinese) | Speeds are entered as numbers, so the next batch runs the same way |
| Qualified rate | ≥98% | Share of capsules separated, filled and locked correctly |
| Power | 60 Hz | Built to your U.S. supply; we confirm the voltage with your quote |
| Total load | 2.12 kW | |
| Compressed air | 0.7 MPa, 0.03 m³/min | A small shop compressor is enough |
| Vacuum pump | 40 m³/h, supplied | No cooling water needed |
| Dimensions | 1,130 × 700 × 1,600 mm | Leave room to move the mold |
| Net weight | 400 kg |
Compare the CGN-208 Series
Five models, one frame. What changes is what they fill, how they lock and how fast they run.
Model | Output (capsules/hour) | Capsule sizes | Locking | Best for |
|
CGN-208D | 10,000–25,000 | #0–#4 | Vertical, foot pedal | Free-flowing powders on a tight budget, moving off manual boards | |
CGN-208D1 | 12,000–24,000 | #000–#4 | Horizontal, pneumatic | Fine or light powders, and repeat batches set on a touchscreen | |
CGN-208D2 | 38,000–43,000 | #000–#4 | Horizontal, pneumatic | Powder products that have outgrown a single-head machine | |
CGN-208S | 12,000–24,000 | #000–#4 | Horizontal, pneumatic | Coated time-release pellets, and powder on the same machine | |
CGN-208X | 12,000–24,000 | #000–#4 | Horizontal, pneumatic | Oil and liquid products in trials and small runs |
Still not sure? Send us your product and daily output, and we’ll tell you which model fits.
Same Sowing Design as Our Automatic Fillers
The sowing unit uses the design from our automatic machines, with less friction and more precise placement of each row.
Automatic Separation
After each mold is loaded, a separation motor turns it under vacuum so capsule opens. On the CGN-208D, the operator does this by hand.
Horizontal Pneumatic Locking
Slide the mold in flat and press the foot switch. Cylinders close the cover, lock the capsules and push them out in one cycle, so fine powder doesn’t shake out.
Touchscreen Settings
Sowing, filling and turntable speeds are each set from 0 to 50 on the screen. Because you enter numbers, not turn knobs, the next batch runs the same way.
CGN-208D1 Semi-auto Capsule Filling Machine Industry Applications
Fine Vitamin and Mineral Powders
Light powders that tend to shake out of an upright capsule stay in when the capsule is locked flat.
Large-Capsule Supplements
Sizes #00 and #000 for high-dose products.
Repeat Batches
Store the speeds that worked on a product and run the same settings next time.
What Changes When You Switch Products
There’s no single changeover time. It depends on what you’re changing.
What you’re changing | What you do | About how long |
A new product, same capsule size | Take off the hopper and mold, rinse with water, wipe with alcohol and let them dry. Then set the hopper and turntable speeds for the new powder. | 15–30 minutes |
A new fill weight, same product | Enter new hopper and turntable speeds on the touchscreen. No parts to change. | A few minutes |
A new capsule size (#000 to #4) | Change the mold and the sowing parts for that size: sowing tube, capsule comb, pressing head and orientation device. | 15–30 minutes |
Cleaning counts as downtime too. Tell us which products and capsule sizes you plan to run, and we’ll supply the parts for each size with the machine.
What to check before you buy
Fill Accuracy
Ask for fill weights from a test run on your own powder, not a sample powder. That's the only number that tells you how your product will fill.
Operating Manual
The machine ships with an operating manual in English, and the touchscreen models have an English interface.
Commissioning and Training
Ask who sets the machine up and trains your operator, and what it costs. Our answer is in your quote.
Why Choose AIPAK?
One Point of Contact
One engineer handles your machine from quote to commissioning, so you’re not chasing several people for one answer.
We Run Your Powder Before You Order
Send us your powder and your capsules. We’ll fill them on the machine and send you the video and the fill weights.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
CGN-208D1: Technical FAQ & Operational Insights
Fill weight comes from the balance between hopper speed and turntable speed, both entered from 0 to 50 on the touchscreen. The factory setting is 30 for both. For powders that fill slowly, set the turntable to turn two or three times per mold.
The mould lies flat when the capsules are locked, so fine powder doesn’t shake out before the cap seats. Cover, locking and ejection run automatically after one press of the foot switch.
Yes. After the mould is loaded, a separation motor turns it under vacuum so capsule opens. You set how many turns on the screen.
Sizes #000 to #4. One mould set ships with the machine; others are ordered by size.
No — it’s built for powders and small granules. For coated pellets, choose the CGN-208S.
Same materials, same locking, same touchscreen. The D2 adds a second sowing head and fills 38,000–43,000 capsules an hour. If one D1 keeps up with your batches, you don’t need the D2.
Yes. Under U.S. federal rules, a capsule filling machine counts as an encapsulating machine, and its import must be declared to the DEA on Form 452 before it arrives. We supply the machine details you need for the filing. Confirm the exact requirements with your customs broker.
Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.
Customers Also Interested In...
Send Us Your Powder and Capsule Size
Tell us what you’re filling, your capsule size and how many capsules you need a day. An engineer replies within one business day with the model that fits and why.
- Direct from our factory
- Lead time confirmed in your quote
- Installation and training available
- Spare parts listed in your quote