Home » APK-550 Pick & Place Case Packer
APK-550 Pick & Place Case Packer
The APK-550 lifts bottles or cartons with vacuum cups and sets them into the shipping case. It runs up to 24 cases a minute, depending on how many items go in each case. If you bottle supplements and pack cases by hand at the end of the line, this is the machine that replaces that station.
- Output — up to 24 cases per minute
- Packs — bottles and cartons, 250×200×200 to 600×400×400 mm cases
- Pick pattern — changed on screen, not by changing tooling
Direct from our factory | Lead time confirmed in your quote | Installation and training available | Spare parts listed in your quote
Is the APK-550 Pick & Place the right packer for you?
✓ This is a fit if…
- You pack bottles into shipping cases
- Your cases are 250×200×200 to 600×400×400 mm
- You need more than 5 cases a minute
- You change pack pattern between SKUs
- Your plant has three-phase power
✕ Look elsewhere if…
- You only pack cartons and never bottles → the APK-550 Side-Load costs less and does the same job
- You need under 5 cases a minute → the APK-550 Side-Load or the APK-CP900 is enough
- Your cases are smaller than 250 × 200 × 200 → the side-load model goes down to 220 × 150 × 120
- You want a lighter power supply → the side-load model draws 4.5 kW against 7.5 kW. Tell us before you quote
Technical specification
Parameter | Value | What this means for you |
Actual output | Up to 24 cases / min, depending on pack pattern | More picks per case means fewer cases per minute |
What it packs | Bottles and cartons | The only model in the range that handles bottles |
Case size min | 250 × 200 × 200 mm | Smaller cases? See the APK-550 Side-Load |
Case size max | 600 × 400 × 400 mm | Larger? See the APK-CP900 at 650 × 450 × 400 |
Power | 7.5 kW | Built to your local supply. We confirm the voltage and frequency with your quote |
Compressed air | 0.6 MPa, under 1 m³/h | Your existing compressor is likely enough |
Footprint | 2,500 × 1,200 × 2,400 mm | Add clearance for case infeed and maintenance |
Weight | 1,500 kg | No special foundation |
Frame | Aluminium alloy and stainless steel | Open stations, easy to clean |
Pick-up | Vacuum cups with rotary vane pump | Oil-free, so no oil near your product |
Vacuum cup head on servo axes
Product is lifted, moved and set down. It is never pushed. Bottles stay upright, and a jar with a rounded shoulder is handled the same way as a square carton.
Oil-free vacuum pump
A rotary vane pump with self-lubrication. No oil mist near your product, low noise, and simple to maintain.
Detection at every station
No case, no product, stack overload, case out of position. Any of these stops the machine before it jams. You get a message on screen, not a pile of damaged cases.
Ideal Applications & Industries
Bottled supplements
Protein capsules, fish oil softgels, multivitamins. Bottles come off the labeller and go straight into the case. The pick-and-place model sets them in upright, in the count and pattern you specify.
Cartoned products
Products already in a retail carton — sachets, stick packs, blister cards. The side-load model stacks and pushes them in one motion.
Gummy vitamins in jars
Wide jars are heavier and less stable than a standard bottle. Vacuum pick-up handles them without tipping, which a pusher cannot always do.
What changing over involves
What changed | What you adjust | Roughly |
Same case, different product | Recipe on screen | Ask us |
Case size changes slightly | Handwheel adjustment at each station | About 1 min per station |
Case size changes completely | Handwheels, plus pick pattern on screen | Ask us |
Case size changes on handwheels and self-locking levers. There are no change parts to buy per case size, and none to store.
One honest note: the number above is for the packer. On a full line the erector, the sealer and the conveyor all adjust too. Ask us for the line number, not just this one.
Three things to check before you buy any packer
Accuracy
Every case leaves with the right count inside. Ask any supplier what their pack success rate is and how it's verified at FAT. Ours is 99% on packing and 99.9% on case appearance.
The manual
A clear English manual is what gets your operator running in a week instead of a month. Ask to see a sample page before you order.
Installation and training
Installed, commissioned, and your people taught to run it. Ask what's included and what costs extra. The answer varies more between suppliers than the machine price does.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Check Your Case Before We Quote
Send us your case dimensions and what goes in it. We check them against the machine before we quote, so a size problem shows up now, not at installation.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Questions About the APK-550 Pick & Place
Yes. Vacuum cups lift each bottle and set it into the case. Nothing is pushed. That’s the difference between this model and the side-load one, and it’s the reason bottling lines use this one.
That depends on your pack pattern and bottle size. More picks per case means fewer cases per minute. Send us your case count and bottle dimensions and we’ll tell you the real rate for your job.
No. The vacuum pump is a self-lubricating rotary vane type, so there is no oil mist in the pick-up air.
About a minute on the erector, using handwheels. There are no change parts to buy or store. On a full line the packer and sealer adjust too — ask us for the line number.
Installation and operator training are quoted with the machine. A kit of wear parts ships with it, and every part, plus the lead time for anything outside the kit, is listed in your quote in writing.
Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.
From 2,200 × 1,600 mm for the side-load packer to 4,050 × 2,450 mm for the all-in-one. Add clearance for loading cases and for maintenance access. Send us your floor plan and we’ll return a layout drawing.
Yes. We build to your local supply and confirm the voltage and frequency with your quote.
Customers Also Interested In...
Send us your case and your product. We'll send back a configuration.
Tell us what you pack, what your case looks like and how many you need a minute. We’ll come back with a machine, a layout drawing and a price. If a case packer isn’t what you need yet, we’ll tell you that instead.
Send your floor dimensions and we’ll do the layout and space calculation free.