APK-GEF50C Single-Head Automatic Powder Filling Machine

Containers fed automatically, one auger filling head

One operator can only place so many tubs an hour. This machine takes the placing off their hands: containers arrive on their own, stop under the filling head, get filled and move on. One auger head, containers moved on a linear conveyor, and no built-in scale.

1. Speed: 25 to 45 containers a minute

2. Fill weight: 1 g to 500 g, by changing the auger

3. Container handling: linear conveyor, no-container-no-fill sensor

4. Power: single-phase or three-phase

Is this the right machine for you?

✓ Yes, if…

✕ Buy something else if…

Containers Fed for You

Containers arrive, stop under the head, get filled and move on, without anyone placing them. That’s the whole difference between this machine and the semi-automatic ones — the filling is the same auger, the handling isn’t.

No Container, No Fill

A sensor checks that a container is in place before the auger turns. A gap in the line or a tipped container means no powder on the conveyor.

Agitator and Auger on Separate Drives

The hopper agitator and the filling auger are driven independently, so the powder is kept moving over the auger without the agitator speed being tied to the fill.

Height and Width Adjust on Handwheels

Guide rails and the filling head height adjust for different container sizes.

Technical specification

Feature

APK-GEF50C

What it means for you

Filling heads

1

Need more speed? See the GEF50D

Dosing

Auger

—

Weighing

None — volumetric

Check weights on a separate scale, or see the GEF50E

Container handling

Linear conveyor

—

Fill weight

1–500 g

Change the auger for different ranges

Accuracy

±0.3%–1% (Dependent on specific powder uniformity and density)

Ask for it at your fill weight, in grams

Speed

25–45/min

—

Power

2.2 kW

Built to your local supply; we confirm the voltage and frequency with your quote

Controls

PLC

—

Model comparison

Model

Type

Weighing

Fill weight

Speed

Power

APK-GEF50A

Semi-automatic

None — volumetric

10-5000g

10–50/min

1.8 kW

APK-GEF50B

Semi-automatic

Built-in, corrects each fill

10–5,000 g

10–50/min

1.8 kW

APK-GEF50C

Single-head automatic

None — volumetric

1–500 g

25–45/min

2.2 kW

APK-GEF50D

Twin-head automatic

None — volumetric

10–5,000 g

25–60/min

3.5 kW

APK-GEF50E

Single-head automatic, screw-conveyor fed

Built-in, corrects each fill

10–2,000 g

20–40/min

3.0 kW

Two questions decide the model. Does every container have to hit its label weight? Then you want a built-in scale. Can one operator keep up placing containers? If not, you want an automatic model that feeds them for you.

Production Applications

Protein powder jars and small tubs

Whey and plant protein in fills up to 500 g, where hand-placing is what limits the shift.

Drink mixes and meal replacements in canisters

Free-flowing blends in rigid canisters at steady volume.

Collagen and creatine jars

Fine, free-flowing powders in wide-mouth jars.

Coffee and cocoa tins

Round tins and cans fed straight to a capper or seamer downstream.

What changing over involves

What changedWhat you adjustRoughly
Same container, different fill weightSet the new dose on the screenA few minutes
Different container sizeGuide rails and filling head height15-30 Minutes
Different powderClean the hopper and auger15-30 Minutes
Fill weight outside the auger’s rangeChange the auger15-30 Minutes

The auger sets the fill range, so tell us your smallest and largest fill and we’ll supply the augers to cover both.

What to check before you buy

01

Fill weight against your label, not a percentage

Ask any supplier for accuracy at your fill weight, in grams.

02

Whether it weighs, or only counts turns

A volumetric auger drifts as the powder settles. Ask whether the machine weighs each fill and corrects itself, or relies on someone to check.

03

What changes when your container changes

Ask whether a new container size is a handwheel adjustment or a new set of change parts — and what those parts cost.

Why Choose AIPAK?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

We Run Your Powder Before You Order

Send us a sample and we fill it on the machine before you order, so you see the weight spread on your own product. Tell us your smallest and largest fill and we supply the augers to cover both.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Fully Expanded Technical FAQ for APK-GEF50C

What changes when I move up from a semi-automatic filler?

Nobody places the containers. The auger does the same job; the difference is that containers arrive, stop and leave on their own, so your output is set by the machine rather than by how fast one person can work.

How does the "No Container, No Fill" sensing array protect the conveyor line from material spills?

The line integrates high-sensitivity inline photoelectric sensors right before the filling gate. If a container falls over, or if there is a gap in your conveyor feed, the sensor stops the vertical auger screw from rotating. The dosing loop will only execute when a container is upright and centered under the nozzle.

Is the single-head auger assembly easy to disassemble for cleaning when running multi-recipe powder batches?

Yes. The hopper and auger come apart with quick-release clamps, so cleaning between powders doesn’t mean dismantling the filling head.

Can the APK-GEF50C be integrated into a larger, fully automated turnkey packaging line later?

Yes. It hands filled containers straight to a capper or induction sealer downstream, and can take containers from an unscrambler upstream. Tell us which machines you’re linking and we’ll match the rates.

How do we adjust the machine parameters when switching between completely different container sizes?

Adjustments are fast and purely mechanical. For the physical line, you simply adjust the quick-release handwheels to slide the conveyor guardrails closer or wider, and rotate the vertical column crank to raise or lower the single-head filler to match the new container height. For the fill, you recall the saved setting on the touchscreen.

Does it weigh each fill?

No. Check weights on a separate scale, or see the APK-GEF50E, which weighs every fill.

Does it run on single-phase power?

Yes, to order. We build to your local supply and confirm the voltage and frequency with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send us your container and your powder.

On an automatic filler the container matters as much as the powder — its diameter and height decide the handling. Send us both, with your fill weight and daily volume, and we’ll tell you which model fits.

  • Direct from our factory

  • Lead time confirmed in your quote

  • Installation and training available

  • Spare parts listed in your quote

Scroll to Top