DPP-260H1 Ultra-High-Output Flat-Plate Blister Packaging Machine

260 mm forming width, 6,000 to 12,000 plates an hour, Alu-PVC and Alu-Alu

Your line is running two 120 mm machines to hit the plate count you need. This one does it with a single 260 mm forming area — five or six plates a stroke instead of two or three, on one set of tooling and one operator.

1. Punch frequency: 10 to 50 times a minute

2. Output: 6,000 to 12,000 plates an hour

3. Forming area: 260 × 180 mm, depth ≤15 mm standard

4. Stroke range: 40 to 180 mm

5. Materials: PVC, PTP, cold-formed Alu-Alu, dialysis paper

Is this the right machine for you?

✓ Yes, if…

✕ Buy something else if…

Maximum Industrial Throughput

Features an expanded forming width that supports multi-lane plate layouts, delivering a significant leap in hourly output for large-scale batches.

Servo Film Traction

Equipped with a high-torque servo motor for material traction, ensuring millimetric accuracy in stroke control and minimizing material waste.

High-Stability Heavy-Duty Drive

The reinforced main drive is built for the load of punching at up to 50 times a minute, with low vibration and noise.

Superior Thermal Sealing Integrity

Utilizes advanced constant-temperature control and high-pressure sealing stations to hold a consistent seal across the full 260 mm width.

Balcony-Style Open Frame

The open frame keeps the drive mechanisms separate from the production zone, so debris stays out of the drive and the production zone is quick to clean.

Technical specification

FeatureSpecification
ModelDPP-260H1 Ultra-High-Output Flat-Plate Blister Packaging Machine
Punch Frequency10–50 times/min
Production Capacity6,000–12,000 plates/hour
Max. Forming Area & Depth260 × 180 mm; depth ≤15 mm (custom up to 25 mm)
Standard Stroke Range40 – 180  mm
Material Width (PVC/PTP)Up to 270  mm
Main Motor Power3.5 kW
Total Power Supply9.5 kW, three-phase, 60 Hz. Built to your U.S. supply; we confirm the voltage with your quote
Overall Dimension3,800 × 850 × 1,800 mm (L×W×H)
Weight1,600 kg

Model comparison

Model

Type

Punch freq.

Output

Forming area

Power

DPP-80

Flat plate

10–33 times/min

1,980 plates/hour

80 mm

2.4 kW

DPP-120H

Flat plate

10–35 times/min

2,400–4,200 plates/hour

120 mm

4.5 kW

DPP-150E

Flat plate

10–40 times/min

3,600–7,200 plates/hour

150 mm

6.5 kW

DPP-180H

Flat plate

10–50 times/min

4,800–9,600 plates/hour

180 mm

8.5 kW

DPP-260H1

Flat plate

10–50 times/min

6,000–12,000 plates/hour

 260 mm

9.5 kW

DPP-260H2

Rotary seal

60–130 times/min

Up to 28,800 plates/hour

260 mm

15 kW

DPH-260H

Rotary

80–150 times/min, 200 max

6,000–18,000 plates/hour

260 mm

24 kW

DPH-380H

Rotary

40–180 times/min, 200 max

Up to 45,000 plates/hour

380 mm

28 kW

Flat plate and rotary are two different machines, not two speeds of one. Flat plate stretches the film against a mold with positive air pressure and a mechanical punch. Rotary forms and seals on a drum with line contact. The difference shows up in material waste, changeover time and what the machine costs you per plate — the table above shows where each one fits.

What changing over involves

A format set is four stations, not one part.

What changed

What you adjust

Roughly

Same format, new batch

Nothing

—

Plate layout or pocket size changes

All four molds — forming, sealing, embossing, cutting

15–30 minutes

Alu-PVC → Alu-Alu

Molds, and the feeder — if you specified the Alu-PVC universal feeder, it cannot be converted

Not a changeover

Tablets → paste or liquid

Molds and a different feeder entirely

Not a changeover

All four stations sit on a rack mandrel with a ruler. You turn the handle and read the scale rather than aligning by eye — which is what keeps a format change to minutes rather than a morning.

What to check before you buy

01

The tooling, not the machine

A format set covers four synchronised stations. Ask any supplier who designs the pocket layout, how long a new format takes to make, and what it costs. That's where a blister project succeeds or fails.

02

The feeder, before you order

An Alu-PVC universal feeder cannot run cold-formed Alu-Alu, and it cannot be converted afterwards. Ask which feeder you're being quoted and what it locks you out of.

03

Installation and training

Ask what's included and what costs extra. The answer varies more between suppliers than the machine price does.

Why Choose AIPAK?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

We Design the Pocket Around Your Product

Send us your tablet or capsule samples and tell us your foil. We design the pocket layout and specify the feeder before we quote, because an Alu-PVC universal feeder can’t be converted to Alu-Alu later.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Industry Applications

A 260 mm forming width only pays back when your plate layout fills it. These are the products where it does:

Multivitamin and supplement daily packs

High plate density is what lowers the per-unit cost here. A 260 mm width fits five or six plates a stroke where a 120 mm machine fits two.

Softgel and capsule blisters

Alu-PVC for standard shelf life, cold-formed Alu-Alu for moisture-sensitive fills.

Tropical blister for humid export markets

A second aluminum forming and sealing station added to the same platform.

Effervescent and hygroscopic tablets

Where the barrier is the product’s shelf life, not a cosmetic choice.

DPP-260H1 Blister Packaging Machine FAQ

How does the DPP-260H1 maintain sealing integrity across its 260 mm width?

The 260H1 uses a reinforced dual-cylinder sealing station with independent PID temperature zones, so pressure and heat stay even from the center of the 260 mm foil to the edges. That’s what keeps the seal consistent across every row in a multi-row layout.

Why choose a 260 mm width over two smaller machines?

A 260 mm width fits five or six plates a stroke where a 120 mm machine fits two or three. One machine, one set of tooling and one operator replace two, which is where the per-plate cost comes down. It only pays back if your plate layout fills the width.

How does the Servo-Driven Traction handle the weight of large-format material rolls?

For the 260H1, we use an upgraded High-Torque Industrial Servo System. This system is specifically tuned to handle the increased inertia of wide, heavy material rolls. It provides millimetric precision in material advancement, keeping pocket registration steady at 50 punches a minute.

Is the DPP-260H1 capable of handling Tropical Blister (ALU/PVC/ALU) configurations?

Yes. The modular design of the 260H1 allows for the addition of a second tropical aluminum forming and sealing station. This makes it an ideal platform for products requiring the extra moisture protection of Tropical Blister packaging, often required for high-humidity export markets.

What is the maintenance schedule for such a heavy-duty machine?

Routine maintenance is mostly mold cleaning and seal inspection, and the balcony-style open frame gives access to the production zone without reaching into the drive. Ask us for the maintenance schedule for your configuration.

How does the machine handle automatic rejection of defective packs at such high speeds?
Camera inspection is available as an option. It checks each plate for broken tablets and empty pockets, and the PLC tracks a failed plate to a pneumatic rejection arm at the discharge, so it’s diverted before cartoning.
Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send Us Your Plate Layout

A 260 mm width only pays back when your plate layout fills it. Send us a sample tablet or capsule and your current plate layout. We’ll tell you how many plates fit per stroke, and whether a 180 mm machine would do the same job for less.

  • Direct from our factory
  • Lead time confirmed in your quote
  • Installation and training available
  • Spare parts listed in your quote
Scroll to Top