DPP-120H Automatic Flat-Plate Blister Packaging Machine

120 × 110 mm forming area, 2,400 to 4,200 plates an hour

You’re running an 80 mm development machine and the batches have outgrown it. The DPP-120H gives you a 120 × 110 mm forming area and a 40 to 120 mm stroke — more cavities per plate, or a deeper pocket for a larger item, on the same four-station format logic.

1. Punch frequency: 10 to 35 times a minute

2. Output: 2,400 to 4,200 plates an hour

3. Forming area: 120 × 110 mm, depth ≤15 mm standard

4. Stroke range: 40 to 120 mm

5. Materials: PVC, PTP, cold-formed Alu-Alu, dialysis paper

Is this the right machine for you?

✓ Yes, if…

✕ Buy something else if…

Technical specification

FeatureDPP-120HWhat does it Mean to You?
Punch frequency10–35 times/min—
Output2,400–4,200 plates/hourUp to twice the DPP-80
Forming area & depth120 × 110 mm, ≤15 mm (custom to 25 mm)Tell us the item dimensions before assuming 25
Stroke range40–120 mm—
Standard plate size110 × 76 mm, or to your designSend us a sample tablet and we design the pocket
Air pressure0.4–0.6 MPa—
Air consumption≥0.35 m³/min—
Main motor1.5 kW—
Total power4.5 kW, three-phase, 60 Hz. Built to your U.S. supply; we confirm the voltage with your quote Single-phase only? See the DPP-80
PVC film0.15–0.5 × 130 mm—
PTP foil0.02–0.035 × 130 mm—
Dialysis paper50–100 g × 130 mm—
Mold coolingTap or recycled waterYou supply the water connection
Dimensions 2,300 × 560 × 1,410 mm (L×W×H)—
Weight750 kg—

Model comparison

Model

Type

Punch freq.

Output

Forming area

Power

DPP-80

Flat plate

10–33 times/min

1,980 plates/hour

80 mm

2.4 kW

DPP-120H

Flat plate

10–35 times/min

2,400–4,200 plates/hour

120 mm

4.5 kW

DPP-150E

Flat plate

10–40 times/min

3,600–7,200 plates/hour

150 mm

6.5 kW

DPP-180H

Flat plate

10–50 times/min

4,800–9,600 plates/hour

180 mm

8.5 kW

DPP-260H1

Flat plate

10–50 times/min

6,000–12,000 plates/hour

 260 mm

9.5 kW

DPP-260H2

Rotary seal

60–130 times/min

Up to 28,800 plates/hour

260 mm

15 kW

DPH-260H

Rotary

80–150 times/min, 200 max

6,000–18,000 plates/hour

260 mm

24 kW

DPH-380H

Rotary

40–180 times/min, 200 max

Up to 45,000 plates/hour

380 mm

28 kW

Flat plate and rotary are two different machines, not two speeds of one. Flat plate stretches the film against a mold with positive air pressure and a mechanical punch. Rotary forms and seals on a drum with line contact. The difference shows up in material waste, changeover time and what the machine costs you per plate — the table above shows where each one fits.

Precision Packaging Heating

Equipped with a high-performance heater that ensures uniform and rapid softening of the PVC film. This thermal control prevents material distortion, so pockets form evenly.

Intelligent Automatic Feeding

Designed for maximum versatility, it automatically handles capsules, tablets, and conventional materials. Feed speed is adjustable to suit your product.

Film-to-Plate Registration

The formed PVC and the foil are aligned before the sealing station rather than at it. Misregistration shows up as a partly sealed pocket, which passes visual inspection and fails a leak test.

High-Integrity Heat Sealing

Features a heavy-duty sealing station that fuses the formed PVC with filled materials and aluminum foil. The result is a consistent seal across the full plate width.

Film Delivery Device

A linkage delivery structure with multi-stage tension control keeps the aluminum foil straight and taut, without folding or creasing, at full speed.

Precision Punching Cutter

Equipped with a high-durability cutter that slices the sealed aluminum-plastic boards into individual pieces. Every cut is performed according to your customized size requirements with millimetric accuracy.

Industry Applications

Multivitamin and supplement blisters

10, 20 or 30-count plates. A 120 × 110 mm forming area fits more cavities per plate than an 80 mm machine, which is where the per-unit cost comes down.

Softgels and capsules

Alu-PVC for standard shelf life, cold-formed Alu-Alu where moisture is the constraint.

Larger or odd-shaped items

A 40 to 120 mm stroke handles items an 80 mm machine cannot. Send us the item and we’ll tell you whether it forms.

Large softgels and caplets

Big fish oil softgels and long caplets need a deep pocket and room on the plate. The 40 to 120 mm stroke handles sizes an 80 mm machine can’t.

What changing over involves

A format set is four stations, not one part.

What changed

What you adjust

Roughly

Same format, new batch

Nothing

—

Plate layout or pocket size changes

All four moulds — forming, sealing, embossing, cutting

15–30 minutes

Alu-PVC → Alu-Alu

Moulds, and the feeder — if you specified the Alu-PVC universal feeder, it cannot be converted

Not a changeover

Tablets → paste or liquid

Moulds and a different feeder entirely

Not a changeover

All four stations sit on a rack mandrel with a ruler. You turn the handle and read the scale rather than aligning by eye — which is what keeps a format change to minutes rather than a morning.

What to check before you buy

01

The tooling, not the machine

A format set covers four synchronised stations. Ask any supplier who designs the pocket layout, how long a new format takes to make, and what it costs. That's where a blister project succeeds or fails.

02

The feeder, before you order

An Alu-PVC universal feeder cannot run cold-formed Alu-Alu, and it cannot be converted afterwards. Ask which feeder you're being quoted and what it locks you out of.

03

Installation and training

Ask what's included and what costs extra. The answer varies more between suppliers than the machine price does.

Why Choose AIPAK?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

We Design the Pocket Around Your Product

Send us your tablet or capsule samples and tell us your foil. We design the pocket layout and specify the feeder before we quote, because an Alu-PVC universal feeder can’t be converted to Alu-Alu later.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

DPP-120H Blister Packaging Machine FAQ

What are the primary advantages of the DPP-120H over the entry-level DPP-80?

A larger forming area (120 × 110 mm) and a longer stroke (40–120 mm), so you can fit more cavities per plate or a deeper pocket for a larger item. It runs up to 35 punches a minute for up to 4,200 plates an hour, against the DPP-80’s 1,980. It needs three-phase power; the DPP-80 doesn’t.

How does the DPP-120H handle delicate ALU/ALU cold-forming materials?

It depends on the feeder you specify at order. Cold-formed Alu-Alu is stretched mechanically rather than softened with heat, so it needs its own forming tooling, and the Alu-PVC universal feeder can’t run it. Tell us at the quotation stage if Alu-Alu is in your plan — it’s not a setting you change later.

How long does a format change take — say from a 10-count to a 20-count plate?

A format set is four molds, not one: forming, sealing, embossing and cutting. All four sit on a rack mandrel with a graduated scale, so you turn the handle and read the scale rather than aligning by eye. 15–30 minutes for an operator who’s done it before. The stroke length is a separate adjustment and it’s done on the screen — that part takes seconds.

One thing worth knowing: if the new format also changes your material, that’s not a changeover. An Alu-PVC universal feeder can’t run cold-formed Alu-Alu, and it can’t be converted afterwards.

What measures are in place to reduce material waste during production?

With the optional stepper motor traction and photocell correction, film advance is controlled closely enough to keep the gap between plates small and the cut in register with the pockets. Send us your plate layout and we’ll tell you what the gap comes down to.

How does the cooling system protect the product during thermal sealing?

The molds are water-cooled with tap or recycled water, which keeps heat from the sealing plates away from the product in the pockets during long runs. You supply the water connection.

Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send Us Your Product and Your Plate Layout

Send us a sample tablet or capsule and your current plate layout. We’ll design the pocket around it and tell you whether 120 mm is the right width, or whether you’d be better off at 80 or 150.

  • Direct from our factory
  • Lead time confirmed in your quote
  • Installation and training available
  • Spare parts listed in your quote
Scroll to Top