DPP-150E High-Efficiency Flat-Plate Blister Packaging Machine
150 × 120 mm forming area, 3,600 to 7,200 plates an hour
Your 120 mm machine is running two shifts to keep up. The DPP-150E gives you a 150 × 120 mm forming area and up to 40 punches a minute — 3,600 to 7,200 plates an hour, roughly double the 120H, on the same four-station format logic and the same footprint class.
1. Punch frequency: 10 to 40 times a minute
2. Output: 3,600 to 7,200 plates an hour
3. Forming area: 150 × 120 mm, depth ≤15 mm standard
4. Stroke range: 40 to 140 mm
5. Materials: PVC, PTP, cold-formed Alu-Alu, dialysis paper
Is this the right machine for you?
✓ Yes, if…
- You need 3,600 to 7,200 plates an hour
- Your plate is up to 150 × 120 mm
- You run several formats and change over regularly
- You have three-phase supply — this machine draws 6.5 kW
- Your film is up to 160 mm wide
✕ Buy something else if…
- You need under 4,000 plates an hour → the DPP-120H does 2,400 to 4,200 at 4.5 kW and a smaller footprint
- You need more than 7,200 → the DPP-180H and 260 series step up from here
- You only have single-phase power → only the DPP-80 runs on single phase
- You're still proving the format → the DPP-80 costs less and the tooling is cheaper to iterate
- Your item needs more than 15 mm depth → 25 mm is a custom build. Send us the item dimensions first
Technical specification
| Feature | DPP-150E | What does it mean to you? |
|---|---|---|
| Punch frequency | 10–40 times/min | — |
| Output | 3,600–7,200 plates/hour | Roughly double the DPP-120H |
| Forming area & depth | 150 × 120 mm, ≤15 mm (custom to 25 mm) | Tell us the item dimensions before assuming 25 |
| Stroke range | 40–140 mm | — |
| Standard plate size | 140 × 90 mm, or to your design | Send us a sample tablet and we design the pocket |
| Air pressure | 0.4–0.6 MPa | — |
| Air consumption | ≥0.4 m³/min | — |
| Main motor | 2.2 kW | — |
| Total power | 6.5 kW, three-phase, 60 Hz. Built to your U.S. supply; we confirm the voltage with your quote | Single-phase only? See the DPP-80 |
| PVC film | 0.15–0.5 × 160 mm | 30 mm wider than the 120H |
| PTP foil | 0.02–0.035 × 160 mm | — |
| Dialysis paper | 50–100 g × 130 mm | Note: paper is 130 mm, not 160 |
| Dimensions | 2,600 × 650 × 1,550 mm (L×W×H) | — |
| Weight | 950 kg | — |
Model comparison
Model | Type | Punch freq. | Output | Forming area | Power |
DPP-80 | Flat plate | 10–33 times/min | 1,980 plates/hour | 80 mm | 2.4 kW |
DPP-120H | Flat plate | 10–35 times/min | 2,400–4,200 plates/hour | 120 mm | 4.5 kW |
DPP-150E | Flat plate | 10–40 times/min | 3,600–7,200 plates/hour | 150 mm | 6.5 kW |
DPP-180H | Flat plate | 10–50 times/min | 4,800–9,600 plates/hour | 180 mm | 8.5 kW |
DPP-260H1 | Flat plate | 10–50 times/min | 6,000–12,000 plates/hour | 260 mm | 9.5 kW |
DPP-260H2 | Rotary seal | 60–130 times/min | Up to 28,800 plates/hour | 260 mm | 15 kW |
DPH-260H | Rotary | 80–150 times/min, 200 max | 6,000–18,000 plates/hour | 260 mm | 24 kW |
DPH-380H | Rotary | 40–180 times/min, 200 max | Up to 45,000 plates/hour | 380 mm | 28 kW |
Flat plate and rotary are two different machines, not two speeds of one. Flat plate stretches the film against a mold with positive air pressure and a mechanical punch. Rotary forms and seals on a drum with line contact. The difference shows up in material waste, changeover time and what the machine costs you per plate — the table above shows where each one fits.
Intelligent Automatic Feeding
A versatile feeding system that automatically processes capsules, tablets, and softgels with adjustable speed to match your specific production tempo.
Film-to-Plate Registration
The formed PVC and the foil are aligned before the sealing station rather than at it. Misregistration shows up as a partly sealed pocket, which passes visual inspection and fails a leak test.
High-Integrity Heat Seal
A robust sealing station fuses the materials under controlled pressure and temperature, giving a consistent barrier against moisture and oxygen across the plate.
Film Delivery Device
The linkage deliver structure features multistage tensile control, keeping the aluminum film straight and taut without any folding, even at peak speeds.
Precision Punching Cutter
High-durability cutters perform millimetric slicing of the sealed boards into customized sizes, delivering a clean, professional finish every time.
Industry Applications
A 150 mm forming width is where most proven formats settle: enough cavities per plate to bring the unit cost down, without the tooling weight of a 260 mm machine.
Multivitamin and supplement blisters
10, 20 and 30-count plates in retail formats. A 150 × 120 mm forming area fits more cavities per plate than the 120H, which is where the per-unit cost comes down at volume.
Softgels and capsules
Alu-PVC for standard shelf life, cold-formed Alu-Alu where moisture is the constraint. Both run on this platform with the right feeder.
Larger tablets and odd-shaped items
A 40 to 140 mm stroke handles items the 120H cannot. Send us the item and we’ll tell you whether it forms cleanly at 15 mm depth.
Moisture-sensitive tablets
Cold-formed Alu-Alu for tablets that pick up moisture, on the same platform with the right feeder. Tell us at the quotation stage, because the feeder can’t be changed later.
What changing over involves
A format set is four stations, not one part.
What changed | What you adjust | Roughly |
Same format, new batch | Nothing | — |
Plate layout or pocket size changes | All four molds — forming, sealing, embossing, cutting | 15–30 minutes |
Alu-PVC → Alu-Alu | Molds, and the feeder — if you specified the Alu-PVC universal feeder, it cannot be converted | Not a changeover |
Tablets → paste or liquid | Molds and a different feeder entirely | Not a changeover |
All four stations sit on a rack mandrel with a ruler. You turn the handle and read the scale rather than aligning by eye — which is what keeps a format change to minutes rather than a morning.
What to check before you buy
The tooling, not the machine
A format set covers four synchronised stations. Ask any supplier who designs the pocket layout, how long a new format takes to make, and what it costs. That's where a blister project succeeds or fails.
The feeder, before you order
An Alu-PVC universal feeder cannot run cold-formed Alu-Alu, and it cannot be converted afterwards. Ask which feeder you're being quoted and what it locks you out of.
Installation and training
Ask what's included and what costs extra. The answer varies more between suppliers than the machine price does.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Design the Pocket Around Your Product
Send us your tablet or capsule samples and tell us your foil. We design the pocket layout and specify the feeder before we quote, because an Alu-PVC universal feeder can’t be converted to Alu-Alu later.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
DPP-150E Blister Packaging Machine FAQ
The DPP-150E sits in the middle of our flat-plate range. Its 150 × 120 mm forming area and 40–140 mm stroke suit facilities running steady medium-volume batches across several product formats — larger than a pilot line, but without the footprint and utility demands of a high-speed rotary system. For R&D and clinical-trial batches, the DPP-80 is the better fit; for continuous mass production, look at the DPP-260 series or the rotary DPH range.
A format set is four molds, not one: forming, sealing, embossing and cutting. All four sit on a rack mandrel with a graduated scale, so you turn the handle and read the scale rather than aligning by eye. 15–30 minutes for an operator who’s done it before. The stroke length is a separate adjustment and it’s done on the screen — that part takes seconds.
One thing worth knowing: if the new format also changes your material, that’s not a changeover. An Alu-PVC universal feeder can’t run cold-formed Alu-Alu, and it can’t be converted afterwards.
Four types. A vibratory feeder or an Alu-PVC universal feeder for capsules and tablets, a paste feeder for pastes and gels, and a liquid filling feeder for liquids and syrups. The Alu-PVC universal feeder runs Alu-PVC only, so if Alu-Alu is in your plan, tell us before we specify it.
Yes. Camera inspection with automatic rejection of broken tablets and empty pockets can be added as an option, along with inkjet batch coding. Tell us what you need at the quotation stage.
Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Customers Also Interested In...
Send us your plate, not just your output target
Plates per hour is the number everyone asks about, but the one that decides the machine is how many cavities fit on your plate. A 10-count and a 30-count plate at the same hourly rate are two different machines.
Send us a sample tablet or capsule and your current plate layout. We’ll tell you whether 150 mm is the right width, or whether you’d be better off at 120 or 180.
- Direct from our factory
- Lead time confirmed in your quote
- Installation and training available
- Spare parts listed in your quote