CGN-208D2 Double-Head Semi-Automatic Capsule Filling Machine
The CGN-208D2 has two sowing heads, which raises output to 38,000–43,000 capsules an hour for powders and small granules in sizes #000 to #4. If one operator on a single-head machine can’t keep up with your orders, this is the next step before a fully automatic machine.
1. 38,000–43,000 capsules/hour
2. Capsule sizes #000 to #4
3. Two sowing heads; horizontal pneumatic locking
Direct from our factory | Lead time confirmed in your quote | Installation and training available | Spare parts listed in your quote
Is the CGN-208D2 the right machine for you?
✓ It's a fit if…
- You fill dry powders or small granules
- You need 35,000 to 43,000 capsules an hour
- You run one shift with an operator at the machine
✕ Look elsewhere if…
- You need less than 24,000 an hour → the CGN-208D1
- You run two or three shifts and want to free up the operator → our NJP automatic fillers
- You fill pellets or liquids → the CGN-208S or CGN-208X
Technical specification
| Specification | CGN-208D2 | What it means for you |
| Output by size | #000: 35,000 / #00: 38,000 / #0: 40,000 / #1: 43,000 / #2: 43,000 capsules/hour | Larger capsules run fewer per row |
| Capsule separation | Automatic, by separation motor | No turning the mold by hand |
| Materials | Dry powders and small granules | Not for sticky or damp powders |
| Locking | Horizontal, pneumatic | Cover, lock and eject run in one cycle |
| Control | Touchscreen | Speeds are entered as numbers, so the next batch runs the same way |
| Sowing | Two sowing heads | Loading is no longer the bottleneck |
| Qualified rate | 99.98% | Share of capsules separated, filled and locked correctly |
| Power | 60 Hz | Built to your U.S. supply; we confirm the voltage with your quote |
| Total load | 2.12 kW | |
| Compressed air | 0.7 MPa, 0.03 m³/min | A small shop compressor is enough |
| Vacuum pump | 40 m³/h, supplied | No cooling water needed |
| Dimensions | 1,130 × 700 × 1,600 mm | Leave room to move the mold |
| Net weight | 400 kg |
Compare the CGN-208 Series
Five models, one frame. What changes is what they fill, how they lock and how fast they run.
Model | Output (capsules/hour) | Capsule sizes | Locking | Best for |
|
CGN-208D | 10,000–25,000 | #0–#4 | Vertical, foot pedal | Free-flowing powders on a tight budget, moving off manual boards | |
CGN-208D1 | 12,000–24,000 | #000–#4 | Horizontal, pneumatic | Fine or light powders, and repeat batches set on a touchscreen | |
CGN-208D2 | 38,000–43,000 | #000–#4 | Horizontal, pneumatic | Powder products that have outgrown a single-head machine | |
CGN-208S | 12,000–24,000 | #000–#4 | Horizontal, pneumatic | Coated time-release pellets, and powder on the same machine | |
CGN-208X | 12,000–24,000 | #000–#4 | Horizontal, pneumatic | Oil and liquid products in trials and small runs |
Still not sure? Send us your product and daily output, and we’ll tell you which model fits.
Two Sowing Heads
Two sowing heads load the mold at the same time. Loading is what usually limits a semi-automatic machine, so doubling it raises output to 38,000–43,000 capsules an hour.
Same Filling and Locking as the D1
The propeller feed, turntable and horizontal pneumatic locking are the same as on the single-head machine, so fill weight is set the same way.
Output by Capsule Size
Bigger capsules mean fewer per row, so output drops from 43,000 an hour on sizes #1 and #2 to 35,000 on #000.
CGN-208D2 Semi-Automatic Capsule Filling Machine Industry Applications
Growing Supplement Brands
Output close to an entry-level automatic machine, while one operator still runs it.
Large-Capsule Products
Sizes #00 and #000 at 35,000–38,000 an hour.
Contract Manufacturers with Short Runs
Frequent product changes at a higher output than a single-head machine.
What Changes When You Switch Products
There’s no single changeover time. It depends on what you’re changing.
What you’re changing | What you do | About how long |
A new product, same capsule size | Take off the hopper and mold, rinse with water, wipe with alcohol and let them dry. Then set the hopper and turntable speeds for the new powder. | 15–30 minutes |
A new fill weight, same product | Enter new hopper and turntable speeds on the touchscreen. No parts to change. | A few minutes |
A new capsule size (#000 to #4) | Change the mold and the sowing parts for that size: sowing tube, capsule comb, pressing head and orientation device. | 15–30 minutes |
Cleaning counts as downtime too. Tell us which products and capsule sizes you plan to run, and we’ll supply the parts for each size with the machine.
What to check before you buy
Fill Accuracy
Ask for fill weights from a test run on your own powder, not a sample powder. That's the only number that tells you how your product will fill.
Operating Manual
The machine ships with an operating manual in English, and the touchscreen models have an English interface.
Commissioning and Training
Ask who sets the machine up and trains your operator, and what it costs. Our answer is in your quote.
Why Choose AIPAK?
One Point of Contact
One engineer handles your machine from quote to commissioning, so you’re not chasing several people for one answer.
We Run Your Powder Before You Order
Send us your powder and your capsules. We’ll fill them on the machine and send you the video and the fill weights.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
CGN-208D2: Technical FAQ & Operational Insights
It has two sowing heads instead of one. Loading the mold is what usually limits a semi-automatic machine, so two heads raise output to 38,000–43,000 capsules an hour. Filling and locking work the same way as on the single-head D1.
#000: 35,000. #00: 38,000. #0: 40,000. #1 and #2: 43,000. Real output also depends on how fast your operator moves the mould.
The operator does the same steps. The second head works at the same time as the first, so there’s nothing extra to set by hand.
The same way as on the single-head models: by balancing hopper speed and turntable speed on the touchscreen.
At 38,000–43,000 capsules an hour, the D2 is already faster than our smaller automatic models, so the choice is about labor, not speed. On the D2, an operator moves the mould all shift. On an NJP machine, that happens inside the machine. If you run more than one shift, look at the NJP range.
Yes. Under U.S. federal rules, a capsule filling machine counts as an encapsulating machine, and its import must be declared to the DEA on Form 452 before it arrives. We supply the machine details you need for the filing. Confirm the exact requirements with your customs broker.
Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.
Customers Also Interested In...
Send Us Your Powder and Capsule Size
Tell us what you’re filling, your capsule size and how many capsules you need a day. An engineer replies within one business day with the model that fits and why.
- Direct from our factory
- Lead time confirmed in your quote
- Installation and training available
- Spare parts listed in your quote