CGN-208D Semi-Automatic Capsule Filling Machine
The CGN-208D fills powders and small granules into sizes #0 to #4 at 10,000 to 25,000 capsules an hour. If you’re moving off manual filling boards and your powder flows freely, it’s the simplest and lowest-cost machine in the series.
1. 10,000–25,000 capsules/hour
2. Capsule sizes #0 to #4
3. Vertical locking with a foot pedal; push-button control
Direct from our factory | Lead time confirmed in your quote | Installation and training available | Spare parts listed in your quote
Is the CGN-208D the right machine for you?
✓ It's a fit if…
- You fill dry, free-flowing powders or small granules
- You need 10,000 to 25,000 capsules an hour
- You use sizes #0 to #4
✕ Look elsewhere if…
- Your powder is fine or light enough to shake out → the CGN-208D1, with horizontal locking
- You use size #00 or #000 → the CGN-208D1
- You fill coated pellets → the CGN-208S
- Your powder is sticky or damp → send us a sample first
Technical specification
| Specification | CGN-208D | What it means for you |
| Output | 10,000–25,000 capsules/hour | Depends on capsule size and operator speed |
| Capsule sizes | #0, #1, #2, #3, #4 | One mold set ships with the machine; others are extra |
| Materials | Dry powders and small granules | Not for sticky or damp powders |
| Locking | Vertical, foot pedal | Fine powder can shake out before the cap seats |
| Control | Push-button, speed knobs | Speeds are set by knob, not stored |
| Qualified rate | ≥97% | Share of capsules separated, filled and locked correctly |
| Power | 60 Hz | Built to your U.S. supply; we confirm the voltage with your quote |
| Total load | 2.12 kW | |
| Compressed air | 0.7 MPa, 0.03 m³/min | A small shop compressor is enough |
| Vacuum pump | 40 m³/h, supplied | No cooling water needed |
| Dimensions | 1,130 × 700 × 1,600 mm | Leave room to move the mold |
| Net weight | 400 kg |
Compare the CGN-208 Series
Five models, one frame. What changes is what they fill, how they lock and how fast they run.
Model | Output (capsules/hour) | Capsule sizes | Locking | Best for |
|
CGN-208D | 10,000–25,000 | #0–#4 | Vertical, foot pedal | Free-flowing powders on a tight budget, moving off manual boards | |
CGN-208D1 | 12,000–24,000 | #000–#4 | Horizontal, pneumatic | Fine or light powders, and repeat batches set on a touchscreen | |
CGN-208D2 | 38,000–43,000 | #000–#4 | Horizontal, pneumatic | Powder products that have outgrown a single-head machine | |
CGN-208S | 12,000–24,000 | #000–#4 | Horizontal, pneumatic | Coated time-release pellets, and powder on the same machine | |
CGN-208X | 12,000–24,000 | #000–#4 | Horizontal, pneumatic | Oil and liquid products in trials and small runs |
Still not sure? Send us your product and daily output, and we’ll tell you which model fits.
Sowing and Separation
Capsules drop from the hopper one row at a time — seven per row for sizes #1 to #4, six for #0. The machine turns them body-down, and vacuum pulls the body away from the cap.
Propeller Powder Feed
A propeller in the hopper pushes powder into the capsule bodies, so light powders fill without waiting to fall in. Fill weight comes from the balance between hopper speed and turntable speed.
Foot-Pedal Locking
Close the mold, press the pedal, and the cylinder locks the capsules and pushes them out into the collection box.
Automatic Counting and a Guarded Sowing Head
The sowing unit stops itself when the mold is full. A guard door covers the sowing head, and opening it stops the motor.
Industry Applications
Vitamin and Mineral Blends
Free-flowing blends in sizes #0 to #4, at a pace a manual board can’t match.
Dry Herbal Powders
Dry, free-flowing botanicals. The propeller pushes light powder into the capsule body.
New Product Trials
Short runs of a new formula before you commit to a larger machine.
What Changes When You Switch Products
There’s no single changeover time. It depends on what you’re changing.
What you’re changing | What you do | About how long |
A new product, same capsule size | Take off the hopper and mold, rinse with water, wipe with alcohol and let them dry. Then set the hopper and turntable speeds for the new powder. | 15–30 minutes |
A new fill weight, same product | Adjust the hopper and turntable speed knobs. No parts to change. | A few minutes |
A new capsule size (#0 to #4) | Change the mold and the sowing parts for that size: sowing tube, capsule comb, pressing head and orientation device. | 15–30 minutes |
Cleaning counts as downtime too. Tell us which products and capsule sizes you plan to run, and we’ll supply the parts for each size with the machine.
What to check before you buy
Fill Accuracy
Ask for fill weights from a test run on your own powder, not a sample powder. That's the only number that tells you how your product will fill.
Operating Manual
The machine ships with an operating manual in English, and the touchscreen models have an English interface.
Commissioning and Training
Ask who sets the machine up and trains your operator, and what it costs. Our answer is in your quote.
Why Choose AIPAK?
One Point of Contact
One engineer handles your machine from quote to commissioning, so you’re not chasing several people for one answer.
We Run Your Powder Before You Order
Send us your powder and your capsules. We’ll fill them on the machine and send you the video and the fill weights.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
CGN-208D: Technical FAQ & Operational Insights
By balancing two speeds: the propeller in the hopper and the turntable underneath. Slow the turntable and speed up the propeller, and the dose goes up. For powders that fill slowly, set the turntable to turn two or three times per mould instead of once.
Sizes #0 to #4. If you use #00 or #000, choose the CGN-208D1, D2 or S.
Dry powders and small granules. Sticky or damp powders aren’t a fit. Send us a sample and we’ll tell you honestly.
Yes. The sowing unit counts rows and stops itself when the mould is full.
2.12 kW total. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote. Compressed air: 0.7 MPa at 0.03 m³/min. The 40 m³/h vacuum pump comes with the machine.
Both fill the same powders at similar output. The D locks capsules upright by foot pedal with push-button control and costs less. The D1 locks them flat with pneumatic cylinders under touchscreen control, separates capsules automatically and takes sizes #00 and #000. Choose the D1 for fine or light powders.
Yes. Under U.S. federal rules, a capsule filling machine counts as an encapsulating machine, and its import must be declared to the DEA on Form 452 before it arrives. We supply the machine details you need for the filing. Confirm the exact requirements with your customs broker.
Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.
Customers Also Interested In...
Send Us Your Powder and Capsule Size
Tell us what you’re filling, your capsule size and how many capsules you need a day. An engineer replies within one business day with the model that fits and why.
- Direct from our factory
- Lead time confirmed in your quote
- Installation and training available
- Spare parts listed in your quote