APK-40B Automatic Effervescent Tablets Tube Filling Machine
Stepper indexing, 35 to 40 tubes a minute, 10 to 20 tablets per tube
Pneumatic stops drift as they wear, and that drift shows up as a tablet caught on the tube mouth. This machine indexes with a stepper motor and a mechanical dividing disk instead. Same speed and same footprint as the 40A — what you’re buying is position that holds as your tablet thickness varies.
1. Speed: 35 to 40 tubes a minute
2. Indexing: stepper motor with mechanical dividing disk
3. Tablets: Ø25 mm, up to 6 mm thick, 10 to 20 per tube
4. Power: 1.5 kW, built to your U.S. supply at 60 Hz
Is this the right machine for you?
✓ Yes, if…
- Your tablet thickness varies towards the ±0.2 mm limit
- You change products or tube sizes regularly
- You need 35 to 40 tubes a minute
- Your tube's inner diameter is at least 2 mm bigger than your tablet
✕ Buy something else if…
- Your tablet thickness is consistent and you run one product → the APK-40A does the same speed with pneumatic stops, for less
- You need more than 40 tubes a minute → the APK-60 runs 50 to 60
- Your tablet hardness is under 5 kg → tablets that soft chip in the track, whatever the machine
Stepper Indexing, Not Pneumatic Stops
Each station is positioned by a stepper motor turning a mechanical dividing disk. A pneumatic stop gets there by hitting a hard limit — reliable when everything is fresh, less so as the cylinder and the stop wear. A stepper goes to a number and stays there.
Screening Track Before the Tube
Tablets pass a screening section that drops out chips and broken pieces before they reach the row that goes into the tube. It also sets the two conditions your tablets have to meet: hardness above 5 kg, and thickness variation within ±0.2 mm. Outside those, no amount of indexing precision helps.
Siemens PLC and Touchscreen
Parameters are entered on screen and recalled, not set by feel. When you come back to a tablet you ran last month, you enter the same numbers rather than re-tuning the track.
No Tablet, No Tube, No Cap
Optical sensors check each station before it acts. If the count is short or a cap is missing, the capping cylinder is locked out for that tube. The tube leaves uncapped, so your operator can pull it at the exit. Automatic rejection is on the APK-60.
Tubes Fed in One Direction
A swinging bucket arranges tubes and feeds them onto the track all facing the same way. Long, light tubes tumble easily, so this is the station that decides whether the rest of the machine gets a steady supply.
Same Speed as the 40A. Different Reason to Buy It
Both machines run 35 to 40 tubes a minute, weigh 420 kg and take the same floor. What you’re paying the difference for is position that holds when your tablet thickness moves inside its ±0.2 mm window — and when you change products often enough that the track gets reset regularly.
Technical specification
Specification | APK-40B | What it means for you |
Speed | 35–40 tubes/min | Depends on tablet size and stack count |
Tablets per tube | 10–20 | Set at build; tell us your count |
Tablet diameter | 25 mm | — |
Tablet thickness | Up to 6 mm | Thickness variance must stay within ±0.2 mm |
Tablet hardness | Above 5 kg | Softer tablets chip in the track |
Tube inner diameter | At least 2 mm larger than the tablet | Below that it jams |
Indexing | Stepper motor and indexing disk | The 40A uses pneumatic cylinders |
Control | Siemens PLC and touchscreen | — |
Power | 1.5 kW, 60 Hz | Built to your U.S. supply. We confirm the voltage with your quote |
Compressed air | 0.5–0.6 MPa, up to 0.28 m³/min | — |
Dust port | 38 mm | Extractor supplied by you |
Dimensions | 1,600 × 1,500 × 1,600 mm | — |
Weight | 420 kg | — |
Contact parts | SUS316L | Frame cover SUS304 |
Model comparison
Model | Indexing | Speed | Power | Weight |
APK-40A | Pneumatic | 35–40 tubes/min | 1.2 kW | 420 kg |
APK-40B | Stepper + indexing disk | 35–40 tubes/min | 1.5 kW | 420 kg |
APK-60 | Stepper, with short-count rejection | 50–60 tubes/min | 2 kW | 1,000 kg |
APKZL-60 | Tube labeller | 60 tubes/min | 0.8 kW | 320 kg |
The 40A and 40B run at the same speed and weigh the same. What differs is how each station is stopped — and that shows up when your tablet thickness varies.
Production Applications
Vitamin C and immunity effervescents
Electrolyte and hydration tablets
Thinner tablets in the same tube. Thickness consistency matters more than diameter here.
Magnesium and mineral effervescents
Larger, denser tablets. Check hardness — under 5 kg they chip in the track.
Multi-SKU production
Several tablet specs through one machine. Stepper indexing holds position as the thickness changes between products.
What changing over involves
What changed | What you adjust | Roughly |
Same tablet, different count per tube | Track setting | 15–30 minutes |
Different tube diameter | Tube guides and cap vibrating disk | 15–30 minutes |
Different tablet diameter | Row alignment rails and track guides | 15–30 minutes |
Tablet thickness drifts within ±0.2 mm | Nothing — but that’s the limit | — |
Beyond ±0.2 mm of thickness variance, no adjustment fixes it. That’s what separates the 40A from the 40B.
What to check before you buy
Your tablet, before the machine
Hardness above 5 kg, thickness variance within ±0.2 mm, and a tube at least 2 mm wider inside than your tablet. Those three decide whether any tube filler runs cleanly on your product — ask any supplier to confirm them against your actual samples.
What happens to a short-count tube
Some machines lock out the cap. Others push the tube out of the line. Ask which, because one of them still leaves you a tube to find at the packing bench.
Installation and training
Ask what's included and what costs extra.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Run Your Tablets and Tubes Before You Order
Send us some tablets and empty tubes. We run them on the machine and send them back, so you can check the count and the tablet edges yourself. You decide whether to talk quotes after that.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Questions About the APK-40B
It positions each station with a stepper motor and a mechanical indexing disk instead of pneumatic stops. A pneumatic stop drifts as the cylinder wears; a stepper goes to the same position every time. That matters when your tablet thickness varies, or when you change products often.
The machine is engineered around a horizontal vibratory sorting table and screening channels that arrange tablets into a single overlapping row. Tablets are systematically aligned flat before a gentle mechanical cylinder shuffles them into the tube mouth, entirely removing vertical drops and preserving raw tablet hardness.
To ensure reliable row counting and jam-free insertion, your raw formulation must maintain a minimum hardness threshold of above 5 kg. Additionally, to prevent count variations from cumulative stacking errors, tablet thickness variance must remain within a tight tolerance of ±0.2 mm.
The capping cylinder is locked out for that tube and the machine alarms. The tube leaves uncapped, so your operator can pull it at the exit. If you want short-count tubes pushed out of the line automatically, that’s the APK-60.
The sorting track drops fine powder away from the tablet path as it runs. The rest is taken away through a 38 mm port that connects to your own dust extractor. The extractor itself isn’t included.
Yes. Your operator adjusts or swaps the tube feed rails, the cap vibrating disk and the row channels. The changeover table above shows what each change involves.
No. Your tube’s inner diameter has to be at least 2 mm larger than your tablet, or the tablets jam at the tube mouth.
Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Customers Also Interested In...
Send Us Tablets and Tubes
Three things decide whether any of these machines runs cleanly on your product, and speed isn’t one of them.
Your tablets need to be harder than 5 kg — softer than that and the edges chip in the track. Thickness has to stay inside ±0.2 mm, or the stack height drifts and the count goes wrong. And your tube’s inner diameter has to be at least 2 mm wider than your tablet, or it jams at the mouth.
Send us samples of both and we’ll check all three before we quote. If your tablet doesn’t clear one of them, we’d rather tell you now than after the machine ships.
- Reply within one business day
- Your tablets and tubes run on the machine before you order
- Your formula and specs stay with us