APC-Z120 Rayon Inserter

The APC-Z120 inserts rayon or paper fill material at 20 to 160 bottles a minute. It does the same job as cotton with one difference. Rayon does not absorb moisture. If your bottle also has a desiccant, that difference matters.

  • Output— 20 to 160 bottles per minute
  • Non-absorbent— rayon leaves your desiccant to do its job
  • Double head— two heads share the cycle

Factory supply|Lead time confirmed in your quote|Installation and training available|Spare parts listed in your quote

Is the APC-Z120 Rayon Inserter for you?

✓ This is a fit if…

✕ Look elsewhere if…

Technical specification

Parameter

Value

What this means for you

Output

20 – 160 bottles / min

Three times a cotton station. Rarely your bottleneck

Insertion heads

2

Two heads share the cycle

Fill material

Rayon or paper, on a coil

Non-absorbent. Does not compete with your desiccant

Inserts per bottle

1 – 3 pieces per bottle

Matters on tall bottles

Minimum bottle neck

Inner Diameter ≥ Φ18 mm

—

Changeover

Hand adjustment, no tools

See the changeover table below

Power

60 Hz, built to your U.S. supply

We confirm the voltage and power with your quote

Compressed air

0.5 – 0.7 MPa (70-100 psi)

—

Footprint

1500 x 800 x 1600 mm

Add clearance for loading the coil

Weight

250 kg

—

Two heads

Two insertion heads share the cycle. Each head gets a full index to draw, cut and insert. Output reaches 160 bottles a minute without handling the material faster.

Non-absorbent material

Cotton is a natural fiber. It takes up moisture from the bottle headspace. In a bottle with a desiccant, the two compete for the same water. Your desiccant spends its capacity on the cotton, not on your product. Rayon is synthetic. It does not.

Bottle sensing

No bottle, no insert. At 160 bottles a minute that adds up quickly in material cost.

Ideal Applications & Industries

Moisture-sensitive products with a desiccant

Probiotics, gummies and softgels. Non-absorbent fill material leaves the desiccant working on your product.

High-speed supplement lines

Lines running above 50 bottles a minute, where a cotton station would set the ceiling.

Contract packing

Line speed decides how many client orders fit into a shift.

Tall bottles with a lot of headspace

Where the product sits well below half the bottle height, one short insert does not restrain it.

What changing over involves

What you changed

What gets adjusted

Roughly how long

Same bottle, different product

Nothing on this machine

0 min

Bottle neck changes

Hand adjustment, no tools

15–30 minutes

Number of inserts per bottle

Setting on the control panel

15–30 minutes

On a full line the counter, the capper and the labeler all adjust too. Ask us for the line number, not just this one.

Three things to check before you buy a cotton or rayon inserter

01

Whether it runs your bottle neck

The insert has to pass your bottle neck without folding. Send the supplier your actual bottle and a coil of the material you use, and ask them to run it before you order.

02

How it knows an insert went in

A bottle that leaves this station without fill material looks the same from the outside. Ask how the machine detects a missed insert, and what happens to that bottle.

03

Whether it keeps up with your counter

A fill-material station slower than your counting machine sets the speed of your whole line. Ask for the rate on your bottle and your material, not the brochure number.

Why Choose AIPAK?

One Point of Contact

One project engineer handles your inserter from proposal to commissioning, and the rest of your bottling line if it comes from us. You’re not chasing five suppliers for one answer.

We Run Your Bottles and Rayon Before You Order

Send us your bottles and a coil of the rayon or paper you use. We run them on the machine and send you the video. You decide whether to talk quotes after that.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

FAQ

How much does a rayon inserter cost?

It depends on your bottle neck and your line speed. Send us a bottle and your bottles per minute. We don’t publish a list price because configuration changes it.

How long is the lead time?

It depends on the configuration. The lead time is confirmed in writing in your quote, along with the spare parts list.

Do you supply the rayon or paper?

No. You buy the rayon or paper coil locally. We set the machine up for the coil you use.

What happens if a bottle misses its insert?

Bottle sensing means nothing is pushed when no bottle is there. If your QA plan needs a check that every bottle got its insert, tell us and we’ll confirm what can be added for your line.

Does it run on U.S. power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How fast does this station need to be?

Fast enough to keep up with your counter. Nothing more. The counter sets your line speed. Every station after it follows.

Are your machines electrically certified for the U.S.?

Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.

Rayon or cotton?

Two questions. Is your product moisture-sensitive? Then rayon, because cotton absorbs moisture and eats into your desiccant. Does your line run faster than 50 bottles a minute? Then rayon again, because that is where the cotton station stops.

Can I switch from cotton to rayon on an existing product?

Usually, for supplements. Check your label and your spec first. If either names cotton, changing it is a documentation change, not just a purchasing one.

Can it insert more than one length per bottle?

Yes, one to three pieces per bottle. That matters on tall bottles where one insert doesn’t fill the headspace.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Check the fit before you order.

Two numbers decide this. Your bottle neck needs 18 mm or more for the insert to pass. Your line speed decides whether one rayon station keeps up with your counter.

Send us both. If rayon doesn’t fit your line, we’ll tell you and show you what does.

Scroll to Top