APC-S120 Cotton Inserter

The APC-S120 cuts cotton from a coil, forms a plug and pushes it into the bottle neck. It runs 30 to 50 bottles a minute on necks of 17 mm or wider. Cotton stops your tablets moving in a part-filled bottle. Without it they chip.

  • Output— 30 to 50 bottles per minute
  • Minimum neck— 17 mm
  • Check this against your line speed before you order

Factory supply|Lead time confirmed in your quote|Installation and training available|Spare parts listed in your quote

Is the APC-S120 Cotton Inserter for you?

✓ This is a fit if…

✕ Look elsewhere if…

Technical specification

Parameter

Value

What this means for you

Output

30 – 50 bottles / min

The slowest station on a bottling line. Check this first

Minimum bottle neck

17 mm

Neck diameter decides fit, not bottle size

Fill material

Cotton, on a coil

You buy the coil locally

Insertion trigger

Bottle sensing

No bottle, no plug

Coil capacity

Max. 10 kg per roll

How often an operator reloads

Changeover

Tool-less adjustment

—

Power

60 Hz, built to your U.S. supply

We confirm the voltage and power with your quote

Footprint

About 1,200 × 800 × 1,600 mm

—

Weight

About 200 kg

—

 

Four operations, one cycle

The machine draws cotton from the coil, cuts it, compresses it into a plug, and pushes it through the neck. Four steps in one index. The compression step is why this station runs slower than the others.

17 mm neck clearance

The plug has to pass the neck without folding. That sets a hard minimum of 17 mm. Bottle volume does not matter. A 250 ml bottle with a narrow neck will not run.

Bottle sensing

No bottle, no plug. A gap in the stream costs you nothing.

Ideal Applications & Industries

Part-filled supplement bottles

A 60-count bottle in a 100-count container leaves headspace. Tablets move, collide and chip. Fill material stops that.

Uncoated and chewable tablets

Uncoated edges chip more readily than film-coated ones. The dust shows up against the white of the cotton.

Products shipped long distance

More transit hours means more vibration hours. Fill material matters more on a bottle crossing an ocean than on one delivered across the state.

Brands whose label already says cotton

If your artwork or your spec names cotton, that is the answer. Rayon runs faster and does not absorb moisture, but changing what goes in the bottle is a documentation change, not just a purchase.

What changing over involves

What did you replace?Which parts need tuning?Roughly how long?
Same bottle, different productNothing0 min
Bottle neck changesHand adjustment, no tools15–30 mins
Plug length changesQuick-change settings for varying plug lengths15–30 mins

Three things to check before you buy a cotton or rayon inserter

01

Whether it runs your bottle neck

The plug has to pass your bottle neck without folding. Send the supplier your actual bottle and a coil of the material you use, and ask them to run it before you order.

02

How it knows an insert went in

A bottle that leaves this station without fill material looks the same from the outside. Ask how the machine detects a missed insert, and what happens to that bottle.

03

Whether it keeps up with your counter

A fill-material station slower than your counting machine sets the speed of your whole line. Ask for the rate on your bottle and your material, not the brochure number.

Why Choose AIPAK?

One Point of Contact

One project engineer handles your inserter from proposal to commissioning, and the rest of your bottling line if it comes from us. You’re not chasing five suppliers for one answer.

We Run Your Bottles and Cotton Before You Order

Send us your bottles and a coil of the cotton you use. We run them on the machine and send you the video. You decide whether to talk quotes after that.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

FAQ

How much does a cotton inserter cost?

It depends on your bottle neck and your line speed. Send us a bottle and your bottles per minute. We don’t publish a list price because configuration changes it.

How long is the lead time?

It depends on the configuration. The lead time is confirmed in writing in your quote, along with the spare parts list.

Do you supply the cotton?

No. You buy the cotton coil locally. We set the machine up for the coil you use.

What happens if a bottle misses its insert?

Bottle sensing means nothing is pushed when no bottle is there. If your QA plan needs a check that every bottle got its insert, tell us and we’ll confirm what can be added for your line.

Does it run on U.S. power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How fast does this station need to be?

Fast enough to keep up with your counter. Nothing more. The counter sets your line speed. Every station after it follows.

Are your machines electrically certified for the U.S.?

Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.

Why is there cotton in a supplement bottle?

To stop the product moving. In a part-filled bottle tablets travel freely in transit. They collide, chip, and arrive with dust at the bottom. Cotton fills the headspace so nothing moves.

Is this fast enough for my line?

At 30 to 50 bottles a minute, this is the slowest station on a bottling line. If your counter runs faster, this station sets your line speed. Three answers: switch to rayon at up to 160, run two cotton stations in parallel, or accept 50 as your ceiling. Tell us your rate and we’ll say which applies.

Cotton or rayon?

Cotton absorbs moisture. Rayon does not. If your bottle also has a desiccant, cotton works against it. Rayon also runs three times faster. Cotton stays the choice where your spec or your label calls for it.

Do I still need a desiccant if I use cotton?

They do different jobs. Cotton stops movement. Desiccant controls moisture. Many products use both, at two stations back to back.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Check the fit before you order.

Two numbers decide this. Your bottle neck needs 17 mm for the plug to pass. Your line speed needs to be 50 bottles a minute or less, or this station becomes your ceiling.

Send us both. If cotton doesn’t fit your line, we’ll tell you and show you what does.

Scroll to Top