Home » APC-C120 Desiccant Inserter
APC-C120 Desiccant Inserter
The APC-C120 drops a desiccant into each bottle after counting and before capping. It runs 50 to 120 bottles a minute on one discharge outlet. If your product needs moisture control and someone is dropping desiccants in by hand, this is the station that replaces them.
- Output— 50 to 120 bottles per minute
- One insert per bottle— bottle sensing means no bottle, no dispense
- Matched to your counter— keeps up with 16 and 24-channel counting machines
Factory supply|Lead time confirmed in your quote|Installation and training available|Spare parts listed in your quote
Is this the right machine for you?
✓ This is a fit if…
- Your product needs a desiccant in the bottle
- Your line runs 50 to 120 bottles a minute
- Your counter is 16 or 24 channels
- You currently drop desiccants in by hand
✕ Look elsewhere if…
- Your line runs faster than 120 bottles a minute → you need the APC-C120D at 80 to 200
- You need cotton, not desiccant → those are different machines. See the APC-S120
- You need both → you need two machines, running back to back. Not one machine doing two jobs
- You run under 80 bottles a day → dropping them in by hand still costs you less
- You haven't chosen a desiccant format yet → choose that first. The desiccant is qualified against your product. The machine follows it
Technical specification
Parameter | Value | What this means for you |
Output | 50 – 120 bottles / min | Keeps up with a 16 or 24-channel counter |
Discharge outlets | 1 | Faster line? See the APC-C120D |
Insertion trigger | Bottle sensing | A gap in the bottle stream costs you nothing |
Desiccant format | Desiccant pouches on a continuous rol | Canisters run on a different machine. Ask us |
Desiccant size range | L: 30–60 mm, W: 20–40 mm | Send a sample and we’ll confirm |
Minimum bottle neck | Inner Diameter ≥ Φ20 mm | Neck diameter matters more than bottle size |
Changeover | Hand adjustment, no tools | See the changeover table below |
Power | 1.5 kW, 60 Hz | Built to your U.S. supply. We confirm the voltage with your quote |
Compressed air | 0.5 – 0.7 MPa (70-100 psi) | — |
Footprint | 1500 x 800 x 1600 mm | Add clearance for loading the desiccant roll |
Weight | 250 kg | — |
Bottle sensing
The machine dispenses when a bottle is under the head. No bottle, no dispense. A gap in the bottle stream costs you nothing — no desiccant on the conveyor, and no one clearing it off before the next bottle passes.
One outlet, matched to your line
One discharge outlet places one desiccant per bottle. That covers 50 to 120 bottles a minute. Outlet count is set when the machine is built. It cannot be added later.
Indexed to the conveyor
The insertion cycle follows conveyor motion, not its own timer. When the counter pauses, this station pauses with it.
Ideal Applications & Industries
Probiotic capsules
Viability is measured against a moisture spec. The desiccant is part of how your product holds its count to the end of shelf life.
Gummy vitamins
Gummies pick up moisture and stick together. A desiccant slows that down inside a closed jar.
Fish oil and softgel products
Softgel shells soften as they take up water. Moisture control keeps them separate in the bottle.
What changing over involves
|
What you changed |
What gets adjusted |
Roughly how long |
|
Same desiccant, different product |
Nothing on this machine |
0 min |
|
Bottle changes, desiccant stays |
No change parts required; fast tool-less adjustment via hand cranks. |
15-30mins |
|
Desiccant format changes |
Change parts required |
15-30min |
On a full line the counter, the capper and the labeler all adjust too. Ask us for the line number, not just this one.
Three things to check before you buy any desiccant inserter
Whether it runs your desiccant
Pouches on a roll and loose canisters run on different machines. A roll-fed inserter cuts each pouch at the print mark, so your pouch size, mark position and roll core all have to suit it. Send the supplier a roll of the desiccant you actually use, and ask them to run it before you order.
How it knows a pouch went in
A bottle that leaves this station without a desiccant looks exactly like one that has it, until the product picks up moisture on the shelf. Ask how the machine detects a missed or half-cut pouch, and what happens to that bottle.
Whether it keeps up with your counter
A desiccant station slower than your counting machine sets the speed of your whole line. Ask for the rate on your bottle and your pouch, not the brochure number. And ask whether a second outlet can be added later or has to be ordered now.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your inserter from proposal to commissioning, and the rest of your bottling line if it comes from us. You’re not chasing five suppliers for one answer.
We Run Your Bottles and Desiccant Before You Order
Send us your bottles and a roll of your desiccant. We run them on the machine and send you the video. You decide whether to talk quotes after that.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
FAQ
It depends on your desiccant format and your line speed. Send us a roll of your desiccant and your bottles per minute. We don’t publish a list price because configuration changes it.
It depends on the configuration. The lead time is confirmed in writing in your quote, along with the spare parts list.
No. Your desiccant supplier does. We set the machine up for the pouch you already use.
The machine checks each insertion and alarms if a pouch doesn’t go in, so your operator can pull that bottle before it’s capped. If your QA plan needs the bottle rejected automatically, tell us and we’ll confirm it in your quote.
Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.
Fast enough to keep up with your counter. Nothing more. The counter sets your line speed. Every station after it follows.
Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Customers Also Interested In...
Send us your desiccant and your bottle.
Desiccant size decides the feeding setup. Bottle neck decides whether it drops cleanly. No two suppliers make quite the same desiccant, so a sample tells us more than a spec sheet.
Post us a handful with a bottle and we’ll run them before quoting.
*Send your floor dimensions and we’ll do the layout and space calculation free.