Home » AIPAK-SP300P Stick Pack Machine | 100–150 Sticks a Minute
AIPAK-SP300P Stick Pack Machine for a Single SKU
You’re launching one stick SKU and a co-packer wants a minimum order you can’t justify yet. The SP300P runs five lanes off a 300 mm film at 100 to 150 sticks a minute — enough to bring that SKU in-house without buying capacity you won’t use.
Output — 100 to 150 sticks per minute, five lanes
Stick size — 20 to 70 mm wide, 50 to 180 mm long
Footprint — 1,200 × 1,500 mm, the smallest machine in the range
Built in our factory | Spare parts listed in your quote | Installation about a week per machine
Is this the right machine for you?
✓ Yes, if…
- You're bringing one stick SKU in-house from a co-packer
- You need up to 150 sticks a minute
- Your stick is 20 to 70 mm wide
- Floor space is tight — this is the smallest machine we build in this line
- You want to prove the format before you commit to capacity
✕ Buy something else if…
- You need more than 150 sticks a minute → the SP600P runs ten lanes at 200 to 300
- Your stick is wider than 70 mm → the SP600P goes to 90 mm, the SP840P to 100 mm
- You're already running several stick SKUs → buy the output you'll need in two years, not the output you need this quarter. Changeover between widths is about three hours
- You're packing a gel or a liquid → ask about the SP300L, same platform with a pump
Technical specification
Specification | AIPAK-SP300P | What it means for you |
Film width | 300 mm | Five lanes at a 25 mm stick |
Lanes | Up to 5 | Five at a 25 mm stick. Fewer lanes for a wider stick |
Output | 100 – 150 sticks/min | Working range from production, not a peak rating |
Stick length | 50 – 180 mm | Same as every model in the range |
Stick width | 20 – 70 mm | The narrowest range of the three. Wider stick? See the SP600P |
Metering | Servo auger — long, short, or short with spinner | — |
Installed power | 3.5 kW | The lowest in the range |
Frequency / Voltage | 60 Hz, 480 V or 208 V, built to your local supply | Depending on your supply, a transformer or stabilizer may be included in the build. We confirm this with the quotation |
Compressed air | 0.8 MPa, 0.8 m³/min | Same as the larger models — air demand doesn’t scale down |
Dimensions | 1,200 × 1,500 × 2,260 mm | The smallest footprint in the range |
Weight | 400 kg | — |
Model comparison
Model | Film width | Lanes 25 mm | Output | Best for |
|
AIPAK-SP300P | 300 mm | 5 | 100 – 150 sticks/min | Your first automated stick line — one SKU, launch or pilot volume | You are here |
AIPAK-SP600P | 600 mm | 10 | 200 – 300 sticks/min | Medium to high-speed stick pack production | |
AIPAK-SP840P | 840 mm | up to 14 | Ask us | Contract manufacturers and high-volume single products |
All three run the same back-seal format, the same stick length range and the same servo auger metering. What changes between them is film width, and film width is what sets lane count. Output ranges are from production, not peak ratings — your powder and your film move the number.
Five lanes, one SKU
A 300 mm film gives five lanes at a 25 mm stick. That’s 100 to 150 sticks a minute, or roughly 48,000 to 72,000 sticks in an eight-hour shift. For a brand launching one SKU, that’s usually more than a co-packer minimum order and less than a machine you’ll spend two years growing into.
Servo auger metering, three auger types
Fill weight is set by the servo auger, and we fit one of three types depending on how your powder behaves. A long auger, a short auger, or a short auger with a spinner. Which one suits your powder is not something a spec sheet answers — it’s what the sample test is for.
The smallest footprint in the range
1,200 × 1,500 mm, 400 kg, 3.5 kW installed power. It fits in a corner of a room that’s already doing something else — which matters when you’re adding a format rather than building a line.
Ideal Applications & Industries
Electrolyte and hydration sticks
3 to 8 g fills, sticks around 25 mm wide. Five lanes covers a single SKU without the minimum order a co-packer needs.
Greens and superfood blends
Fibrous and hygroscopic powders sit at the difficult end of the flowability range. The auger and the dosing timing are set against your actual powder, which is what the sample test is for.
Creatine, amino acids and other free-flowing powders
Free-flowing powders at the other end of the range, where gravity can beat the screw and powder reaches the seal area. Dosing timing is what we adjust.
Probiotic and enzyme powders
Small fills in narrow sticks — 20 mm is the minimum width this platform forms. Low fill weights are where auger choice matters most.
Changeover
Changing stick length is a screen setting. Changing stick width is a three-hour job.
What changed | What you adjust | Roughly |
Stick length | Touchscreen setting | 15-30 minutes |
New film roll, same size | Splice the new roll | 15-30 minutes |
Stick width | Change the format parts, then fine-tune | About 3 hours, whole machine |
Different powder, same stick | Auger may change — depends on flowability | 15-30 minutes |
So we build the machine around your primary stick, not around every stick you might run someday.
If you’re switching between two very different stick widths every day, two machines will cost you less than the downtime.
What to check before you buy
Whether anyone has run your powder
Powder fails in two directions. Too damp and it bridges in the hopper; too free-flowing and gravity beats the screw. A spec sheet won't tell you which end yours is on. Ask any supplier to run a sample before you order — and ask to see the fill weight data, not just a photo of finished sticks.
The manual
A clear English manual gets your operator running in a week. A bad one takes a month. Ask to see a sample page before you order.
Installation and training
Our engineers come to your plant, about a week per machine. Travel and on-site costs are quoted separately. Installation isn't free anywhere — it's either a line item or it's inside the machine price. We quote it as a line item so you can see it.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Run Your Powder Before You Order
Send us a powder sample and we’ll run it on the machine and send you the fill weight data. We sign an NDA before your sample ships. You decide whether to talk quotes after that.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Deep Dive FAQ
That’s the right question, and we can’t answer it from a spec sheet. Powder fails in two directions — too damp and it bridges in the hopper, too free-flowing and gravity beats the screw and floods the fill. Send us a sample. We run it, adjust the auger and the dosing timing, and send you the fill weight data. NDA signed before your sample ships.
Work back from your stick width. Each lane uses roughly twice your stick width, plus an allowance for the back-seal lap. On this machine, a 25 mm stick gives five lanes on the 300 mm film. Tell us your stick width and your target output and we’ll tell you which film width you need.
100 to 150 sticks a minute on five lanes, which is 20 to 30 cuts per minute per lane. That’s the working range we see in production, and it moves with your powder’s flowability and your film. We don’t publish a peak rating, because peak ratings aren’t what you’ll run.
For a powder drink mix at production volume, a stick. A stick is a sealed tube with one seam down the back — the tube forms continuously, so the machine runs fast. A sachet is sealed on all four sides, which means more seal area, more dwell time and a slower cycle. Sachets earn their place when you need the extra print area, or when you’re running a gel or a liquid.
Length is a touchscreen setting — minutes. Width is about three hours for the whole machine. If you’re switching between two very different widths every day, two machines will cost you less than the downtime.
Our engineers travel to your plant, about a week per machine. Travel and on-site costs are quoted separately. Installation isn’t free anywhere — it’s either a line item or it’s inside the machine price. We quote it as a line item so you can see it.
60 Hz, 480 V or 208 V, built to your local supply. Depending on your supply, a transformer or stabilizer may be included in the build. We confirm this with the quotation.
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Work it back from your volume. At 100 to 150 a minute, an eight-hour shift gives roughly 48,000 to 72,000 sticks, or about 1 to 1.4 million a month on a single shift. If your forecast is above that within two years, look at the SP600P now — you can’t add lanes to a 300 mm film.
No. Lane count is set by film width, and film width is set by the machine. A 300 mm machine will never run ten lanes. That’s the one decision on this page you can’t revisit, so it’s worth being honest with yourself about your two-year forecast.
Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.
Customers Also Interested In...
Tell Us What You're Packing
Two of these fields is enough to get a real answer back. All of them gets you a configuration.
Not sure which model ⇢
Tell us your powder and stick size
Send us a powder sample ⇢
We'll run it and send you the data
Send your full specs ⇢
Get a line quote
- NDA signed before any sample ships.
- No sales calls — we reply by email or WhatsApp, whichever you gave us.
- Reply within one business day.