APK-DM160 High-Speed Deblistering Machine
220 to 280 blister cards a minute, counted automatically
When more than one blister line is feeding rejects into rework, a 100-card-a-minute machine becomes the bottleneck. This one runs 220 to 280 cards a minute on a 360 W drive, counts every card with an electronic counter, and handles Alu-PVC, Alu-Alu and Alu-PVC-Alu — as long as the pockets sit in regular rows.
1. Speed: 220 to 280 cards a minute, the fastest in the range
2. Automatic count: an electronic counter tallies every card
3. Three blister materials: Alu-PVC, Alu-Alu and Alu-PVC-Alu
4. Floor-standing: 900 × 500 × 1,200 mm, 65 kg
Is the APK-DM160 the right size for you?
✓ Yes, if…
- Rejects from more than one blister line end up at the same rework station
- You rework more than 120 cards a minute
- Your rework has to be counted and recorded
- Your pockets sit in regular rows
✕ Buy something else if…
- 120 cards a minute is enough → the APK-DM130 has the same automatic count in a 400 × 400 mm footprint
- Floor space is tight → this machine is 900 mm long, more than twice the DM130
- Your pockets are irregular or offset → only the APK-DM80 takes those layouts
360 W Drive for the Fastest Rate in the Range
Twice the motor of the smaller models, with a reduction gear that keeps the rollers turning slowly and steadily even at 220 to 280 cards a minute. More cards go through, but each pocket still gets the same even pressure.
Every Card Counted
An electronic counter tallies each card as it passes through. At the end of a rework run you have a number for the batch record, not an estimate.
Linear Guide Rails
Cards travel on linear guide rails, which keep them aligned under the rollers row after row at the top of the speed range.
Product in One Tray, Foil in Another
A guide plate and a rubber retaining flap send the recovered product one way and the empty card the other, so nobody sorts them by hand afterwards.
Technical specification
| Parameter | APK-DM160 | What it means for you |
| Operation | Fully automatic | Cards feed on their own |
| Card count | Automatic, electronic counter | A number for your batch record |
| Speed | 220–280 cards/min, adjustable | The fastest in the range |
| Pocket layout | Regular rows and columns | For irregular layouts, see the DM80 |
| Blister material | Alu-PVC, Alu-Alu, Alu-PVC-Alu | — |
| Card size | Maximum: 140 × 115 mm card layouts / Minimum: 50 × 35 mm card layouts | — |
| Change parts | None | — |
| Rollers | Pure PU | — |
| Guide rails | Linear guides | — |
| Motor | 360 W with speed controller | Twice the smaller automatic models |
| Power supply | 110–120 V or 220 V, 50/60 Hz, single phase, 360 W | Tell us which outlet you have |
| Construction | SUS304 | — |
| Dimensions | 900 × 500 × 1,200 mm | More than twice the footprint of the DM130 |
| Weight | 65 kg | — |
Model comparison
Model | Operation | Speed | Layout | Blister material | Count | Weight |
APK-DM80 | Semi-auto | 25–35/min | Any | Alu-PVC | Manual | 16 kg |
APK-DM120 | Automatic | 50–65/min | Regular rows | Alu-PVC, Alu-Alu, Alu-PVC-Alu | Manual | 25 kg |
APK-DM120A | Automatic | 80–95/min | Regular rows | Same | Manual | 35 kg |
APK-DM130 | Automatic | 100–120/min | Regular rows | Same | Automatic | 38 kg |
APK-DM160 | Automatic | 220–280/min | Regular rows | Same | Automatic | 65 kg |
Two questions decide the model. Are your pockets laid out in regular rows? If not, only the DM80 takes them. And how many cards do you rework an hour?
Industry Applications
Softgels from Short-Filled Cards
A short-filled or badly sealed softgel card still holds good product. Soft PU rollers split the foil without crushing the oil-filled shell.
Alu-Alu Cards from Moisture-Sensitive Products
Probiotics and hygroscopic capsules usually go into cold-formed Alu-Alu, which is harder to peel by hand. This machine splits all three common blister materials.
Daily Start-Up Rejects
The first cards off each blister run, before the format settles. At 220–280 cards a minute a day’s rejects clear in minutes.
Contract Packing Rework
Several clients’ products in a week, each on a different card size. No change parts, so switching between them is an adjustment.
What changing over involves
| What changed | What you adjust | Roughly |
| Different card size | Guide rail width and roller pressure | A few minutes |
| Different product | Wipe down the rollers and chute | A few minutes |
No moulds and no change parts, as long as the pockets sit in regular rows.
What to check before you buy
Your blister material
Alu-PVC splits more easily than Alu-Alu. Ask which materials each model handles, and send a card to be sure.
Your pocket layout
Most automatic deblisterers need regular rows. Irregular layouts need a machine built for them.
Your outlet
Check the voltage before the machine ships.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Run Your Cards Before You Order
Send us a few of your rejected blister cards. We run them on the machine and send back the recovered product, so you can see whether your softgels come out whole — on your own cards, not ours.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Questions About the APK-DM160
Speed and size. Both count cards automatically and handle all three blister materials in regular-row layouts. The DM160 runs 220–280 cards a minute on a 360 W drive, against 100–120 on the DM130 — but it’s 900 mm long and 65 kg, against 400 mm and 38 kg. If one blister line feeds your rework, the DM130 is usually enough.
No. Operators set the guide rails and roller pressure on dials. Different card sizes need no molds and no change parts.
The 360 W motor drives the rollers through a reduction gear, so they still turn slowly and steadily at 220 to 280 cards a minute. The rollers are soft polyurethane, so they give around a softgel while still splitting the foil.
The rollers are pure polyurethane, chosen because it wears slowly and doesn’t flake the way cheap rubber does. A roller material test report is available on request.
Yes. It splits Alu-PVC, cold-formed Alu-Alu and Alu-PVC-Alu cards without changing any parts.
Pockets have to sit in straight rows and columns, so the guide rails and rollers line up with them card after card. For irregular or offset layouts, see the APK-DM80.
One year on the whole machine, excluding damage from misuse.
Yes. It runs on single-phase power with no compressed air or vacuum. We build it for your U.S. outlet — 110–120 V or 220 V, 50/60 Hz — and confirm the voltage with your quote. It draws 360 W.
Customers Also Interested In...
Send Us a Few Rejected Cards
Two things decide which deblistering machine you need, and speed isn’t the first one. Are your pockets laid out in regular rows, or irregular like a calendar pack? And is the card Alu-PVC, or a harder Alu-Alu or Alu-PVC-Alu? Tell us both and we’ll narrow five models down to one.
Better still, send us a few of your rejected cards. We’ll run them on the machine and send back the recovered product, so you can see whether your softgels come out whole — on your own cards, not ours.
- Reply within one business day
- Your cards run on the machine before you order
- Your product details stay with us
No sales calls — we reply by email or WhatsApp, whichever you gave us.