APK-SP220 Strip Packing Machine — 220 mm Film, Air-Cylinder Cutting

Soft Alu-Alu heated-roller sealing for a single strip layout

The simplest machine in the range. Same heated-roller sealing and vibratory feeding as the SP300, on a 220 mm film, with an air cylinder driving the cutter instead of a servo. If you run one strip layout and rarely change it, this does the job for less.

1. Sealing Mechanism: Vertical roller-type double foil heat sealing (No thermal forming required).

2. Material Versatility: Optimized for Alu/Alu (Al-plastic combined film) and Plastic/Plastic films.

3. Cutting Drive: Precision pneumatic cylinder-controlled die cutting system.

4. Automation Control: Integrated Siemens PLC and Siemens V20 drive.

Is this the right machine for you?

✓ Yes, if…

✕ Buy something else if…

Technical specification

Feature APK-SP220 What it means for you
Drum speed 7–14 rpm, stepless —
Output 20,000–60,000 pcs/h Depends on tablet size and how many lanes fit
Film width 220 mm —
Alu-plastic laminate 0.08–0.10 × 220 mm Soft Alu-Alu strip
Medical PVC 0.05–0.10 × 220 mm For plastic-plastic strips
Reel core 70–75 mm —
Heating 1.5 kW × 2 One per sealing roller
Main motor 0.75 kW —
Cutting Air cylinder Strip length is set by hand. The SP300 sets it on the touchscreen
Air 0.5–0.6 MPa, ≥0.1 m³/min —
Power supply 60 Hz Built to your U.S. supply. We confirm the voltage with your quote
Dimensions 1,600 × 850 × 2,500 mm —
Weight 900 kg —
Controls Siemens PLC, Siemens V20 drive —

Model comparison

Model

Film width

Drum speed

Cutting

Output

Heating

APK-SP220

220 mm

7–14 rpm

Air cylinder

20,000–60,000 pcs/h

1.5 kW × 2

APK-SP300

300 mm

7–14 rpm

Servo

20,000–80,000 pcs/h

1.2 kW × 2

APK-SP400

400 mm

7–14 rpm

Servo

20,000–120,000 pcs/h

1.5 kW × 2

APK-SP500

500 mm

6–20 rpm

Full servo, motion controller

Depends on layout

1.5 kW × 2

The film width sets how many lanes fit across the rollers. The cutting drive sets how easily you change strip layout. Output depends on both — and on your tablet size — so tell us your tablet and your strip layout and we’ll give you your number, not the headline one.

Sealed Flat, Not Formed

A blister machine heats plastic and stretches it into a pocket. This machine doesn’t form anything. The tablet sits between two soft aluminum foils, and heated rollers press the foils together around it. Nothing is stretched thin, so the barrier is the full thickness of the foil on both faces.

Vibratory Feeding

Tablets are fed from a vibrating hopper into the sealing rollers, lane by lane.

Broken Tablets Screened Out

A screen separates broken pieces and powder before the tablets reach the rollers. A fragment sealed into the margin is what causes a leak, so this step matters more than it looks.

Air-Cylinder Cutting

The cutter is driven by an air cylinder, so strip length is set by hand when you change layout. Simple, with fewer parts to look after. If you change layout often, the SP300’s servo cutter sets it on the touchscreen.

Industry Applications

Where this machine is used:

Effervescent tablets

The textbook case for Alu-Alu strips. An effervescent tablet starts reacting the moment it picks up moisture, and foil on both faces keeps it out.

Probiotic and moisture-sensitive capsules

Where the moisture barrier is the shelf life. Each capsule is sealed in its own pocket, so opening one doesn’t expose the rest.

Light-sensitive vitamins and botanicals

Foil on both faces blocks light completely — something a clear blister can’t do.

Lozenges and compressed candies

Flat strips that fit a pocket or a wallet, sealed without the tablet surface touching a forming die.

What changing over involves

Strip length is a screen setting. Tablet size is a roller change.

What changed

What you adjust

Roughly

Strip length or cut position

Cutting stroke on the touchscreen

A few minutes

New foil roll, same size

Change the reel

A few minutes

Tablet size or shape

Sealing roller dies and feeder parts

15–30 minutes

Alu-Alu → plastic-plastic

Foil and temperature settings

15–30 minutes

The pocket is cut into the heated sealing rollers, so a different tablet means a different roller set. An extra set of rollers and feeder change parts are both options you can order with the machine.

What to check before you buy

01

The roller dies, not the machine

The pocket is machined into the heated sealing rollers. Ask who designs it around your tablet, how long a new set takes, and what it costs — that's where a strip project succeeds or fails.

02

The manual

A clear English manual gets your operator running in a week instead of a month. Ask to see a sample page before you order.

03

Installation and training

Ask what's included and what costs extra. The answer varies more between suppliers than the machine price does.

Why Choose AIPAK?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

Roller Dies Designed Around Your Tablet

Send us a few samples and tell us your strip layout. We design the pocket and the layout around your tablet before you order.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Questions About the APK-SP220

What is the primary difference between a strip packing machine and a standard blister packaging machine?

A blister machine heats a plastic sheet, forms pockets in it and seals a flat foil on top. A strip machine forms nothing: the tablet is sealed between two soft foils on heated rollers. Nothing is stretched thin, so you get the full barrier of the foil on both faces.

What cutting drive mechanism does the APK-SP220 deploy, and how does it compare to higher-tier models?

An air cylinder drives the cutter, which suits a single strip layout such as 2 × 4 or 2 × 10. The SP300 and SP400 cut with a servo instead, so you change strip length on the touchscreen rather than by hand.

Can the APK-SP220 handle different thickness grades of packaging materials?

Yes. Soft Alu-Alu laminate from 0.08 to 0.10 mm, or medical PVC from 0.05 to 0.10 mm for plastic-plastic strips.

How does the machine handle powder accumulation or broken tablets during high-speed runs?

Processing fragile compressed tablets can generate debris. The APK-SP220 is equipped with an active vibrating material feeder and a broken piece filtering screen. Before the tablets drop into the main roller pocket matrices, the vibratory sift loops capture dust, broken halves, and fragments. This debris is filtered out into a collection zone, preventing trapped particles from contaminating the hot-seal seam and ensuring tight package sealing.

What options can I add?

An extra set of roller dies, feeder change parts, one-side or two-side eye-mark registration for printed foil, and a detection and reject system for missing tablets. Tell us which you need at the quotation stage.

Is the APK-SP220 built to work in synchronized upstream/downstream packaging lines?

Yes. The outfeed can feed a cartoner such as our WZH-120 III, so strips go straight into retail cartons. Tell us which cartoner you run, or plan to, and we’ll confirm how the two are interlocked before you order.

Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send us your tablet and your strip layout

Tablet size decides the roller dies. Strip layout — 2 × 4, 2 × 10, whatever your carton holds — decides the cutting and the lane count. Send us a few samples and tell us the layout, and we’ll tell you which width you need and what it will actually produce.

  • Reply within one business day
  • Roller pocket designed from your samples
  • Your product specs stay with us
Scroll to Top