APK-DM130 Deblistering Machine with Automatic Count

100 to 120 blister cards a minute, counted as they run

When rework has to be logged, someone has to count the cards. This machine counts them for you: an electronic counter tallies every card as it goes through, while a pair of soft PU rollers press each pocket open and the recovered tablets and capsules drop into one tray. It handles Alu-PVC, Alu-Alu and Alu-PVC-Alu, with pockets in regular rows.

1. Speed: 100 to 120 cards a minute, adjustable

2. Automatic count: an electronic counter tallies every card

3. Three blister materials: Alu-PVC, Alu-Alu and Alu-PVC-Alu

4. No change parts: card size set by adjustment, not by mould

Is the APK-DM130 the right size for you?

✓ Yes, if…

✕ Buy something else if…

Every Card Counted

An electronic counter tallies each card as it passes through. At the end of a rework run you have a number to write in the batch record, not an estimate.

Rollers That Mimic a Thumb

A motor and reduction gear turn a pair of soft PU rollers that press each pocket the way an operator’s thumb would — steady, low speed, even pressure. The foil splits and the tablet or capsule drops out without being crushed.

Linear Guide Rails

Cards travel on linear guide rails, which keep them aligned under the rollers at 100–120 cards a minute.

Product in One Tray, Foil in Another

A guide plate and a rubber retaining flap send the recovered product one way and the empty card the other, so nobody sorts them by hand afterwards.

Technical specification

ParameterAPK-DM130What it means for you
OperationFully automaticCards feed on their own
Card count

Automatic, electronic counter

A number for your batch record
Speed100–120 cards/min, adjustable—
Pocket layoutRegular rows and columnsFor irregular layouts, see the DM80
Blister materialAlu-PVC, Alu-Alu, Alu-PVC-Alu—
Card sizeMaximum: 140 × 115 mm layouts / Minimum: 50 × 35 mm layouts—
Change partsNone—
RollersPure PU—
Guide railsLinear guides—
Motor 180 W with speed controller—
Power supply110–120 V or 220 V, 50/60 Hz, single phase, 180 WTell us which outlet you have
ConstructionSUS304—
Dimensions400 × 400 × 1,100 mmStands on the floor
Weight38 kg—

Model comparison

Model

Operation

Speed

Layout

Blister material

Count

Weight

APK-DM80

Semi-auto

25–35/min

Any

Alu-PVC

Manual

16 kg

APK-DM120

Automatic

50–65/min

Regular rows

Alu-PVC, Alu-Alu, Alu-PVC-Alu

Manual

25 kg

APK-DM120A

Automatic

80–95/min

Regular rows

Same

Manual

35 kg

APK-DM130

Automatic

100–120/min

Regular rows

Same

Automatic

38 kg

APK-DM160

Automatic

220–280/min

Regular rows

Same

Automatic

65 kg

Two questions decide the model. Are your pockets laid out in regular rows? If not, only the DM80 takes them. And how many cards do you rework an hour?

Industry Applications

Softgels from Short-Filled Cards

A short-filled or badly sealed softgel card still holds good product. Soft PU rollers split the foil without crushing the oil-filled shell.

Alu-Alu Cards from Moisture-Sensitive Products

Probiotics and hygroscopic capsules usually go into cold-formed Alu-Alu, which is harder to peel by hand. This machine splits all three common blister materials.

Daily Start-Up Rejects

The first cards off each blister run, before the format settles. At 100–120 cards a minute a day’s rejects clear in minutes.

Contract Packing Rework

Several clients’ products in a week, each on a different card size. No change parts, so switching between them is an adjustment.

What changing over involves

What changedWhat you adjustRoughly
Different card sizeGuide rail width and roller pressureA few minutes
Different productWipe down the rollers and chuteA few minutes

No moulds and no change parts, as long as the pockets sit in regular rows.

What to check before you buy

01

Your blister material

Alu-PVC splits more easily than Alu-Alu. Ask which materials each model handles, and send a card to be sure.

02

Your pocket layout

Most automatic deblisterers need regular rows. Irregular layouts need a machine built for them.

03

Your outlet

Check the voltage before the machine ships.

Why Choose AIPAK?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

We Run Your Cards Before You Order

Send us a few of your rejected blister cards. We run them on the machine and send back the recovered product, so you can see whether your softgels come out whole — on your own cards, not ours.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Questions About the APK-DM130

What's the difference between the DM130 and the DM120A?

The counter, mainly. Both use the same rollers, guide rails and motor, and both handle all three blister materials in regular-row layouts. The DM130 adds an electronic counter and runs a little faster, at 100–120 cards a minute against 80–95. If you don’t need to record how many cards you rework, the DM120A is the simpler buy.

Does this machine require customized changeover parts when we switch blister card sizes?

No. Operators set the guide rails and roller pressure on dials. Different card sizes need no molds and no change parts.

How does the APK-DM130 protect fragile softgels or capsule shells from breaking during high-speed extraction?

A motor and reduction gear turn the rollers slowly and steadily, the way a thumb presses a pocket. The rollers are soft polyurethane, so they give around a softgel while still splitting the foil.

Will the rollers leave particles on the recovered product?

The rollers are pure polyurethane, chosen because it wears slowly and doesn’t flake the way cheap rubber does. A roller material test report is available on request.

Can the APK-DM130 process high-barrier aluminum-aluminum (Alu-Alu) or Alu-Plastic-Alu blister cards?

Yes. It splits Alu-PVC, cold-formed Alu-Alu and Alu-PVC-Alu cards without changing any parts.

What type of pocket layout or row arrangement is required for the blister cards to feed correctly?

Pockets have to sit in straight rows and columns, so the guide rails and rollers line up with them card after card. For irregular or offset layouts, see the APK-DM80.

What warranty comes with it?

One year on the whole machine, excluding damage from misuse.

What are the facility utility and external infrastructure requirements for installation?

Yes. It runs on single-phase power with no compressed air or vacuum. We build it for your U.S. outlet — 110–120 V or 220 V, 50/60 Hz — and confirm the voltage with your quote. It draws 180 W.

Customers Also Interested In...

Send Us a Few Rejected Cards

Two things decide which deblistering machine you need, and speed isn’t the first one. Are your pockets laid out in regular rows, or irregular like a calendar pack? And is the card Alu-PVC, or a harder Alu-Alu or Alu-PVC-Alu? Tell us both and we’ll narrow five models down to one.

Better still, send us a few of your rejected cards. We’ll run them on the machine and send back the recovered product, so you can see whether your softgels come out whole — on your own cards, not ours.

  • Reply within one business day
  • Your cards run on the machine before you order
  • Your product details stay with us

No sales calls — we reply by email or WhatsApp, whichever you gave us.

Scroll to Top