APK-DM120 Automatic Deblistering Machine
50 to 65 blister cards a minute, for Alu-PVC, Alu-Alu and Alu-PVC-Alu
The step up from peeling blister cards by hand, or from a benchtop machine. Cards are fed automatically, a pair of soft PU rollers press each pocket open, and recovered tablets and capsules drop into one tray while the empty foil goes to another. It needs the pockets in regular rows, handles all three common blister materials, and fits on a bench at 510 mm tall.
1. Speed: 50 to 65 cards a minute, adjustable
2. Three blister materials: Alu-PVC, Alu-Alu and Alu-PVC-Alu
3. Regular-row layouts: pockets in straight rows and columns
4. Compact: 350 × 380 × 510 mm, 25 kg
Is the APK-DM120 the right size for you?
✓ Yes, if…
- You rework rejected blister cards with pockets in regular rows
- You need more than a benchtop machine's 35 cards a minute
- Your cards are Alu-PVC, Alu-Alu or Alu-PVC-Alu
- Bench space is limited — this is the most compact automatic model in the range
✕ Buy something else if…
- Your pockets are irregular or offset → only the APK-DM80 takes those layouts
- You need more than 65 cards a minute → the APK-DM120A runs 80–95 on the same mechanism
- You need an automatic card count for your rework records → the APK-DM130 counts automatically at 100–120 a minute
Rollers That Mimic a Thumb
A motor and reduction gear turn a pair of rollers that press each pocket the way an operator’s thumb would — steady, low speed, even pressure. The foil splits and the tablet or capsule drops out without being crushed.
Soft PU Rollers
The rollers are pure polyurethane, wear-resistant and firm enough to split Alu-Alu backing while yielding around a softgel.
Linear Guide Rails
Cards travel on linear guide rails, which keep them aligned under the rollers row after row.
Product in One Tray, Foil in Another
A guide plate and a rubber retaining flap send the recovered product one way and the empty card the other, so nobody sorts them by hand afterwards.
Technical specification
| Parameter | APK-DM120 | What it means for you |
| Operation | Fully automatic | Cards feed on their own |
| Card count | Manual | For automatic counting, see the DM130 |
| Speed | 50–65 cards/min, adjustable | — |
| Pocket layout | Regular rows and columns | For irregular layouts, see the DM80 |
| Blister material | Alu-PVC, Alu-Alu, Alu-PVC-Alu | — |
| Card size | Maximum: 140 × 115 mm card layouts / Minimum: 50 × 35 mm card layouts | — |
| Change parts | None | — |
| Rollers | Pure PU | — |
| Guide rails | Linear guides | — |
| Motor | 180 W with speed controller | — |
| Power supply | 110–120 V or 220 V, 50/60 Hz, single phase, 180 W | Tell us which outlet you have |
| Construction | SUS304 | — |
| Dimensions | 350 × 380 × 510 mm | The most compact automatic model |
| Weight | 25 kg | — |
Model comparison
Model | Operation | Speed | Layout | Blister material | Count | Weight |
APK-DM80 | Semi-auto | 25–35/min | Any | Alu-PVC | Manual | 16 kg |
APK-DM120 | Automatic | 50–65/min | Regular rows | Alu-PVC, Alu-Alu, Alu-PVC-Alu | Manual | 25 kg |
APK-DM120A | Automatic | 80–95/min | Regular rows | Same | Manual | 35 kg |
APK-DM130 | Automatic | 100–120/min | Regular rows | Same | Automatic | 38 kg |
APK-DM160 | Automatic | 220–280/min | Regular rows | Same | Automatic | 65 kg |
Two questions decide the model. Are your pockets laid out in regular rows? If not, only the DM80 takes them. And how many cards do you rework an hour?
Industry Applications
Softgels from Short-Filled Cards
A short-filled or badly sealed softgel card still holds good product. Soft PU rollers split the foil without crushing the oil-filled shell.
Alu-Alu Cards from Moisture-Sensitive Products
Probiotics and hygroscopic capsules usually go into cold-formed Alu-Alu, which is harder to peel by hand. This machine splits all three common blister materials.
Daily Start-Up Rejects
The first cards off each blister run, before the format settles. At 50–65 cards a minute a day’s rejects clear in minutes.
Contract Packing Rework
Several clients’ products in a week, each on a different card size. No change parts, so switching between them is an adjustment.
What changing over involves
| What changed | What you adjust | Roughly |
| Different card size | Guide rail width and roller pressure | A few minutes |
| Different product | Wipe down the rollers and chute | A few minutes |
No moulds and no change parts, as long as the pockets sit in regular rows.
What to check before you buy
Your blister material
Alu-PVC splits more easily than Alu-Alu. Ask which materials each model handles, and send a card to be sure.
Your pocket layout
Most automatic deblisterers need regular rows. Irregular layouts need a machine built for them.
Your outlet
Check the voltage before the machine ships.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Run Your Cards Before You Order
Send us a few of your rejected blister cards. We run them on the machine and send back the recovered product, so you can see whether your softgels come out whole — on your own cards, not ours.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Questions About the APK-DM120
It’s the first fully automatic model in the range. Against the benchtop DM80, it feeds cards on its own and handles Alu-Alu and Alu-PVC-Alu as well as Alu-PVC — but it needs regular-row layouts. Against the DM120A, it’s the same mechanism at 50–65 cards a minute instead of 80–95, in a frame less than half the height.
No, it does not. The APK-DM120 handles different blister card sizes directly. You can adjust the roller pressure and tracking alignment on the fly without purchasing or installing extra molds.
A motor and reduction gear turn the rollers slowly and steadily, the way a thumb presses a pocket. The rollers are soft polyurethane, so they give around a softgel while still splitting the foil.
The rollers are pure polyurethane, chosen because it wears slowly and doesn’t flake the way cheap rubber does. (A roller material test report is available on request.)
Yes. It splits Alu-PVC, cold-formed Alu-Alu and Alu-PVC-Alu cards without changing any parts.
Pockets have to sit in straight rows and columns, so the guide rails and rollers line up with them card after card. For irregular or offset layouts, see the APK-DM80.
One year on the whole machine, excluding damage from misuse.
Yes. It runs on single-phase power with no compressed air or vacuum. We build it for your U.S. outlet — 110–120 V or 220 V, 50/60 Hz — and confirm the voltage with your quote. It draws 180 W.
Customers Also Interested In...
Send Us a Few Rejected Cards
Two things decide which deblistering machine you need, and speed isn’t the first one. Are your pockets laid out in regular rows, or irregular like a calendar pack? And is the card Alu-PVC, or a harder Alu-Alu or Alu-PVC-Alu? Tell us both and we’ll narrow five models down to one.
Better still, send us a few of your rejected cards. We’ll run them on the machine and send back the recovered product, so you can see whether your softgels come out whole — on your own cards, not ours.
- Reply within one business day
- Your cards run on the machine before you order
- Your product details stay with us
No sales calls — we reply by email or WhatsApp, whichever you gave us.