WZH-120P Bottle Cartoning Machine

Automatic Bottle Unscrambling, Leaflet Folding and Cartoning

Your bottles come off the labeler and someone puts them into cartons by hand, with a leaflet. The WZH-120P does that at up to 120 cartons a minute. It unscrambles and feeds the bottles itself — you do not need a separate infeed station.

1. Speed: 30 to 120 cartons per minute

2. Bottle unscrambling built in: round bottles, flat bottles and dropper bottles

3. Power: single-phase, 1.5 kW

Is this the right machine for you?

✓ Yes, if…

✕ Buy something else if…

Bottle unscrambling at the infeed

Bottles arrive from your labeler and the machine orients and feeds them itself. There is no separate unscrambling station to buy, install or synchronize. That is also why this machine is longer than the blister version — the extra 1,795 mm is the bottle handling section.

Round, flat and dropper bottles

The infeed handles round bottles, flat bottles and eyedropper bottles. Tell us which you run and send a sample — bottle shape is what the infeed is set up around.

Leaflet folding, 1 to 4 folds

Unfolded leaflet up to 250 × 180 mm, folded and pushed into the carton alongside the bottle in the same motion.

Single-Phase Power

This machine and the WZH-120-III are the only cartoners in our range on single-phase supply.

Technical specification

Parameter

Value

What it means for you

Encasing speed

30–120 cartons/min

—

What it packs

Bottles — round, flat, dropper

Blisters or sachets need a different machine

Infeed

Automatic bottle unscrambling and conveying

No separate unscrambler to buy

Carton size

70-180 × 35-85 × 14-50 mm

Same window as the rest of our range

Unfolded leaflet

80-250 × 90-180 mm

—

Air pressure

≥0.6 MPa

—

Air consumption

120–160 L/min

—

Power

1.5 kW, single-phase, 60 Hz

Built to your U.S. supply; we confirm the voltage with your quote

Dimensions

4,950 × 1,260 × 1,770 mm

1,795 mm longer than the blister version — the unscrambling section

Weight

1,600 kg

—

Model comparison

Model

Speed

What it packs

Carton L×W×H (mm)

Leaflet unfolded

Power

WZH-120-III

30–120

Blister packs

70-180 × 35-85 × 14-50

80-250 × 90-180

Single-phase, 1.5 kW

WZH-120P

30–120

Bottles, with infeed unscrambling

70-180 × 35-85 × 14-50

80-250 × 90-180

Single-phase, 1.5 kW

WZH-120D

30–120

Sachets and pouches, 1–12 per carton

70-180 × 35-85 × 14-50

80-250 × 90-180

Three-phase, 4 kW

WZH-180

180

Blisters, tubes, trays, bottles, sachets

70-165 × 35-85 × 14-50

80-300 × 90-180

Three-phase, 4.5 kW

WZH-260

260

Blisters, tubes, trays, sachets

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5 kW

WZH-260P

260

Bottles, with infeed unscrambling

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5 kW

WZH-320

320

Blisters, bottles, tubes, sachets

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5.8 kW

WZH-450

450

Blisters, tubes, trays, sachets

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5 kW

WZH-600

600

Blisters, bottles, sachets · full servo

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 15 kW

Two things decide the model, and speed is only the second one.

What you pack comes first. Blisters, bottles and sachets each need a different feeder at the infeed. In the 120 series that is three separate machines. Above 120 the machines are more general, except the 260P, which is built for bottles.

Carton size is almost the same across the range. Every model takes a carton 70 to 180 mm long, except the WZH-180, which stops at 165 mm. Only the width narrows slightly above 180 cartons a minute, from 85 to 80 mm. So you do not lose carton flexibility by buying speed.

Industry Applications

Supplement bottles into retail cartons

Your bottle comes off the labeler and goes straight into a carton with a leaflet. This is the machine that sits at the end of a bottling line.

Dropper and liquid bottles

Eyedropper bottles and small liquid containers, which do not stand reliably on a general-purpose infeed.

Flat and oval bottles

Non-round bottles that a general cartoner cannot orient.

Changeover

Throughput sells machines. Changeover decides what you actually produce in a week.

What changed

What you adjust

Roughly

Same carton, new batch

Recipe on the screen

A few minutes

Carton length or width

Handwheels only — no parts to change

15–30 minutes

Carton or product height

The pusher head and pusher block must be swapped

15–30 minutes

Product format changes

The feeder at the infeed

15–30 minutes

Closing style (tuck-in → glue)

Not a changeover. That is a rebuild

—

Length and width are a handwheel. Height means changing the pusher. A different product means a different feeder. A different closing style means a different machine.

What to check before you buy

01

The five questions any supplier should ask you

What goes in the carton and how many. Carton dimensions and closing style. Leaflet format and whether it arrives folded. What feeds the machine upstream. Target speed. If a supplier quotes you without these, the machine that arrives will not fit the line it was bought for.

02

Carton sizing — where most projects go wrong

Manually packed cartons are usually a snug fit around the product. An automated pusher needs clearance. Send us both your product and carton dimensions. We will tell you before you order whether your existing carton runs, or needs modifying — rather than after it has been printed in quantity.

03

The documentation

Operating and maintenance manuals in English, electrical schematics, a spare parts list with part numbers and prices, and a signed FAT report before the machine ships. Ask any supplier to show you a sample manual page before you order.

Why Choose AIPAK?

One Point of Contact

You deal with us for the machine, the installation and the service call. Custom feeders, closing configurations and layout changes go through the engineers who build it.

Your Carton Checked Before You Order

Send us your carton and product dimensions. We tell you before you order whether your carton runs as it is or needs changing, not after it has been printed in quantity.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

WZH-120P Cartoning Machine FAQ

Do I need a separate bottle unscrambler?

No. The unscrambling and feeding are part of this machine. That is the difference between the WZH-120P and the blister version, and it is why this one is longer.

What bottle shapes does it handle?

Round, flat and dropper bottles. Send us a sample bottle with your enquiry — the infeed is set up around your bottle shape and dimensions.

Is this a continuous-motion machine?

No. It is an intermittent machine at 30 to 120 cartons a minute. The P in the model name refers to bottles, not to continuous motion.

Can it pack blisters or sachets too?

No. The infeed is built for bottles. See the WZH-120-III for blisters or the WZH-120D for sachets.

Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send us your carton and your product

Carton dimensions and product dimensions together decide the machine. Send both and we will come back with a configuration, a layout drawing and a price. If a cartoner is not what you need yet, we will tell you that instead.

  • Direct from our factory

  • Lead time confirmed in your quote

  • Installation and training available

  • Spare parts listed in your quote

Scroll to Top