WZH-120D Sachet Cartoning Machine

1 to 12 Sachets per Carton, with Automatic Leaflet Folding

You are counting sachets into cartons by hand — twelve to a box, or six, or three. The WZH-120D counts and packs them at up to 120 cartons a minute, with the leaflet folded and inserted in the same push.

1. Speed: 30 to 120 cartons per minute

2. Sachets per carton: 1 to 12, depending on sachet size

3. Also runs: condoms, adhesive bandages, plasters, coffee bags, face masks

Is this the right machine for you?

✓ Yes, if…

✕ Buy something else if…

1 to 12 sachets per carton

How many fit depends on your sachet size. The count is set on the screen. This is the parameter that decides whether your product runs at all, so send us a sample sachet with your enquiry.

Built for flexible packs, not rigid ones

Sachets, stick packs, condoms, adhesive bandages, plasters, coffee bags, face masks. Anything flat and flexible that has to be counted into a carton. Rigid products — blisters, bottles — go on a different machine.

Leaflet folding, 1 to 4 folds

Unfolded leaflet up to 250 × 180 mm, folded and inserted with the product in the same push.

Three-Phase Power, 4 kW

Higher supply and higher air consumption than the blister and bottle versions — 260 to 300 L/min against 120 to 160. Check both before you plan the installation.

Technical specification

Parameter

Value

What it means for you

Encasing speed

30–120 cartons/min

—

What it packs

Sachets, stick packs, pouches, condoms, bandages, plasters, coffee bags, face masks

Rigid products need a different machine

Sachets per carton

1–12, depending on sachet size

The parameter that decides whether your product runs. Send us a sample

Carton size

70-180 × 35-85 × 14-50 mm

Same window as the rest of our range

Unfolded leaflet

80-250 × 90-180 mm

—

Air pressure

≥0.6 MPa

—

Air consumption

260–300 L/min

Nearly double the blister and bottle versions. Check your compressor

Power

4 kW, three-phase, 60 Hz

Built to your U.S. supply; we confirm the voltage with your quote. The blister and bottle versions run on single-phase

Dimensions

3,872 × 1,260 × 1,770 mm

—

Weight

1,600 kg

—

Model comparison

Model

Speed

What it packs

Carton L×W×H (mm)

Leaflet unfolded

Power

WZH-120-III

30–120

Blister packs

70-180 × 35-85 × 14-50

80-250 × 90-180

Single-phase, 1.5 kW

WZH-120P

30–120

Bottles, with infeed unscrambling

70-180 × 35-85 × 14-50

80-250 × 90-180

Single-phase, 1.5 kW

WZH-120D

30–120

Sachets and pouches, 1–12 per carton

70-180 × 35-85 × 14-50

80-250 × 90-180

Three-phase, 4 kW

WZH-180

180

Blisters, tubes, trays, bottles, sachets

70-165 × 35-85 × 14-50

80-300 × 90-180

Three-phase, 4.5 kW

WZH-260

260

Blisters, tubes, trays, sachets

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5 kW

WZH-260P

260

Bottles, with infeed unscrambling

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5 kW

WZH-320

320

Blisters, bottles, tubes, sachets

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5.8 kW

WZH-450

450

Blisters, tubes, trays, sachets

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5 kW

WZH-600

600

Blisters, bottles, sachets · full servo

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 15 kW

Two things decide the model, and speed is only the second one.

What you pack comes first. Blisters, bottles and sachets each need a different feeder at the infeed. In the 120 series that is three separate machines. Above 120 the machines are more general, except the 260P, which is built for bottles.

Carton size is almost the same across the range. Every model takes a carton 70 to 180 mm long, except the WZH-180, which stops at 165 mm. Only the width narrows slightly above 180 cartons a minute, from 85 to 80 mm. So you do not lose carton flexibility by buying speed.

Industry Applications

Powder sachets and stick packs

Single-serve supplement powders, counted into a retail carton with a leaflet.

Patches and plasters

Adhesive bandages, patches and plaster sheets.

Face masks and single-use sachets

Flexible packs that have to be counted rather than weighed.

Changeover

Throughput sells machines. Changeover decides what you actually produce in a week.

What changed

What you adjust

Roughly

Same carton, new batch

Recipe on the screen

A few minutes

Carton length or width

Handwheels only — no parts to change

15–30 minutes

Carton or product height

The pusher head and pusher block must be swapped

15–30 minutes

Product format changes

The feeder at the infeed

15–30 minutes

Closing style (tuck-in → glue)

Not a changeover. That is a rebuild

—

Length and width are a handwheel. Height means changing the pusher. A different product means a different feeder. A different closing style means a different machine.

What to check before you buy

01

The five questions any supplier should ask you

What goes in the carton and how many. Carton dimensions and closing style. Leaflet format and whether it arrives folded. What feeds the machine upstream. Target speed. If a supplier quotes you without these, the machine that arrives will not fit the line it was bought for.

02

Carton sizing — where most projects go wrong

Manually packed cartons are usually a snug fit around the product. An automated pusher needs clearance. Send us both your product and carton dimensions. We will tell you before you order whether your existing carton runs, or needs modifying — rather than after it has been printed in quantity.

03

The documentation

Operating and maintenance manuals in English, electrical schematics, a spare parts list with part numbers and prices, and a signed FAT report before the machine ships. Ask any supplier to show you a sample manual page before you order.

Why Choose AIPAK?

Your Carton Checked Before You Order

Send us your carton and product dimensions. We tell you before you order whether your carton runs as it is or needs changing, not after it has been printed in quantity.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

WZH-120D Cartoning Machine FAQ

How many sachets fit in one carton?

Between 1 and 12, depending on your sachet dimensions and your carton. Send us a sample sachet and your carton size and we will tell you exactly.

Why does this machine need three-phase power when the blister version doesn't?

The sachet feeder draws more than the blister feeder — 4 kW against 1.5. Air consumption is also higher, 260 to 300 L/min against 120 to 160. If your packing area has only single-phase supply, tell us before you order.

Can it pack blisters or bottles?

No. The infeed is built for flexible packs. Blisters go on the WZH-120-III, bottles on the WZH-120P.

Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send us your carton and your product

Carton dimensions and product dimensions together decide the machine. Send both and we will come back with a configuration, a layout drawing and a price. If a cartoner is not what you need yet, we will tell you that instead.

  • Direct from our factory

  • Lead time confirmed in your quote

  • Installation and training available

  • Spare parts listed in your quote

Scroll to Top