YPJ-6 Vertical Automatic Capsule Pill Polishing Machine
Polish and Lift in One Machine
The YPJ-6 brushes powder off capsules or tablets as it carries them upward, then drops them into the hopper of the next machine, 800 to 1,100 mm up. If your filler discharges low and your counter or blister machine loads high, it does the polishing and the lifting in one footprint.
1. Lifts product 800 to 1,100 mm while polishing
2. Capsules #000 to #5, and tablets
3. Single-phase power, 70 kg, on casters
Direct from our factory | Lead time confirmed in your quote | Installation and training available | Spare parts listed in your quote
Polishes on the Way Up
A spiral nylon brush turns inside a perforated stainless steel tube and carries the product upward, brushing it as it climbs. Loose powder falls out through the mesh.
Feeds the Next Machine
The outlet sits 800 to 1,100 mm up, high enough to drop straight into the hopper of a counter or blister machine.
Capsules and Tablets
The same brush cleans filled capsules and compressed tablets. Brush speed is adjustable to suit the product.
Motor at the Top
The motor sits at the top of the column, away from where powder falls, so dust doesn’t reach the drive.
Technical specification
| Technical Specifications | YPJ-6 Technical Specifications |
| Output | Up to 400,000 capsules/hour or 300,000 tablets/hour |
| Products | Capsule sizes #000 to #5; compressed tablets |
| Lift height | 800 mm ~ 1100 mm |
| Motor | 0.37 kW |
| Vacuum | 2.8 m³/min |
| Compressed Air | 0.12 m³/min |
| Air Pressure | 0.3 ~ 0.5 MPa |
| Dimensions | 850 x 580 x 1350 mm |
| Weight | Approx. 70 kg |
| Power | Single-phase. Built to your local supply; we confirm the voltage and frequency with your quote |
Why Choose AIPAK?
One Point of Contact
One engineer handles your machine from quote to commissioning, so you’re not chasing several people for one answer.
Send Us Your Capsules First
Post us a few hundred filled capsules. We run them through the polisher and send them back, so you see the finish on your own product before you order.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Industry Applications
Filler to Counter in One Step
Your filler discharges low and your counter loads high. The YPJ-6 polishes the capsules and lifts them into the counter’s hopper.
Tablet Lines
Tablets from the press, dedusted and lifted into the next machine.
Tight Floor Space
A vertical column takes less floor than a horizontal polisher plus a separate elevator.
YPJ-6 FAQ
A vertical polisher lifts the product while it polishes. If the next machine loads higher than your filler discharges, you don’t need a separate elevator.
Yes. The same brush cleans filled capsules, sizes #000 to #5, and compressed tablets. Send us samples if your tablets have fragile edges or a coating.
The spiral brush carries them upward inside the perforated tube. The brush speed is adjustable, so you can set it for your product.
The outer tube and the brush lift out without tools, so the column can be cleaned between products in a few minutes.
No. The YPJ-6 runs sizes #000 to #5 without change parts.
Single-phase power, 0.37 kW. We build to your local supply and confirm the voltage and frequency with your quote. It also needs a dust-collection vacuum at about 2.8 m³/min and compressed air at 0.3 to 0.5 MPa.
Powder falls down through the mesh. With the motor at the top, it stays out of the drive.
Customers Also Interested In...
Send Us Your Capsules
- Direct from our factory
- Lead time confirmed in your quote
- Installation and training available
- Spare parts listed in your quote