HPT-II Capsule Polisher With Sorter

Polish and Sort in One Pass, with an Incline You Can Adjust

The HPT-II brushes powder off filled capsules and sorts out empty shells and loose caps at the outlet. The brush drum is set at an angle you can adjust from 10° to 25°: the steeper it is, the longer the capsules stay in the brush, which helps with sticky herbal powders.

1. Adjustable incline, 10° to 25°

2. Polishes and sorts out empty shells

3. Sizes #000 to #5, no change parts

Direct from our factory | Lead time confirmed in your quote | Installation and training available | Spare parts listed in your quote

Adjustable Incline

Raise the angle and capsules climb more slowly through the brush, so sticky powders get a longer polish. Lower it for free-flowing powders and higher speed.

Built-In Sorter

At the outlet, empty shells, loose caps and broken pieces are separated from filled capsules and sent to a reject box.

Vacuum Dust Removal

Vacuum ports along the brush drum take the dust away as it comes off, so it doesn’t settle back on the capsules.

Motor Below the Product

The motor and belts sit below the polishing chamber, away from the capsules. Brush speed is set on a speed controller.

Technical specification

Technical Specifications

HPT-II Technical Specifications

OutputUp to 450,000 capsules/hour
Capsule sizes#000, #00, #0, #1, #2, #3, #4, #5
Motor0.25 kW
Vacuum3.0 m³/min
Compressed Air0.15 m³/min
Air Pressure0.4 ~ 0.6 MPa
Incline10° ~ 25°
Dimensions (L x W x H)1050 x 600 x 1350 mm
WeightApprox. 75 kg
Power

Single-phase. Built to your local supply; we confirm the voltage and frequency with your quote

Why Choose AIPAK?

One Point of Contact

One engineer handles your machine from quote to commissioning, so you’re not chasing several people for one answer.

Send Us Your Capsules First

Post us a few hundred filled capsules. We run them through the polisher and send them back, so you see the finish on your own product before you order.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Industry Applications

Sticky Herbal and Botanical Powders

Raise the incline and the capsules spend longer in the brush, which takes off powders that cling.

Sports Nutrition and Multivitamins

Large capsules, often #00 or #000, polished and sorted before bottling.

Several Lines, One Polisher

On casters, so it can be moved between fillers as the schedule changes.

HPT-II FAQ

How is the HPT-II different from the NFJ-150?

Both brush powder off capsules and sort out empty shells. The HPT-II adds an adjustable incline, from 10° to 25°, so you can keep capsules in the brush longer when the powder is sticky.

How does the sorter work?

At the outlet, empty shells, loose caps and broken pieces are lighter than filled capsules and are separated into a reject box, so they don’t go on to packaging.

Can it keep up with an automatic capsule filler?

It’s rated at up to 450,000 capsules an hour. Tell us your filler’s output and we’ll confirm it keeps up.

When should I raise the incline?

When powder still shows on the capsules at the outlet. A steeper angle slows the capsules down in the brush. For free-flowing powders, a lower angle is usually enough.

Will the brush damage gelatin or HPMC capsules?

The brush is soft nylon with rounded tips, and its speed is adjustable. For thin-walled HPMC capsules, send us a few hundred and we’ll check the finish on your brand before you order. The brush is a wear part and is listed in your quote.

How long does cleaning take?

The brush drum and the stainless steel track come off without tools, so the machine can be cleaned between products or colors in a few minutes.

What power and utilities does it need?

Single-phase power, 0.25 kW. We build to your local supply and confirm the voltage and frequency with your quote. It also needs a dust-collection vacuum at about 3.0 m³/min and compressed air at 0.4 to 0.6 MPa for the sorter.

Do I need change parts for different capsule sizes?

No. The HPT-II runs sizes #000 to #5 without change parts.

Customers Also Interested In...

Send Us Your Capsules

Tell us your capsule sizes, how many capsules an hour your filler runs and what’s in them. An engineer replies within one business day with the polisher that fits.
  • Direct from our factory
  • Lead time confirmed in your quote
  • Installation and training available
  • Spare parts listed in your quote
Scroll to Top