APKZRJ Fixed Type Vacuum Emulsifying Mixer

Vacuum emulsifier with a fixed lid — no lift columns, for rooms with less headroom

A lid-lift emulsifier needs room above the vessel for the lid and the mixer to rise clear — up to 4.55 m on a 1,000-litre machine. This model keeps the lid fixed to the vessel, so it only needs the height of the machine itself. Ingredients go in through ports on the lid and are drawn in under vacuum; the product is mixed, emulsified and discharged without the lid ever lifting.

1. Fixed lid: no lift columns, no clearance needed above the vessel

2. Capacity: 100 to 1,000 liters per batch

3. Ingredients in under vacuum: through ports on the lid, without opening the vessel

4. Cleaned in place: through a CIP port on the lid, with the vessel closed

Is the APKZRJ-F the right size for you?

✓ This is a fit if…

✕ Buy something else if…

Fixed Lid, No Lift Columns

The lid is fixed to the vessel, and there are no lift columns or lifting gear beside it. The machine stands at one height whether it’s running, cleaning or idle.

Only the Headroom of Its Own Height

A lid-lift emulsifier needs room above the vessel for the lid and mixer to rise clear — up to 4.55 m on a 1,000-litre machine. A fixed lid needs none of that. If your production room can’t take a lid raised to that height, this is the model that fits.

Ingredients In Through the Lid

With the lid closed, liquids and powders go in through ports on the lid and are drawn into the vessel under vacuum. Nothing has to be opened during a batch.

Homogenizer and Slow Mixer

A homogenizer breaks the oil and water phases into a fine emulsion, while a slow mixer keeps the whole batch turning, so the cream near the wall doesn’t sit still.

Cleaned in Place, Emptied from the Bottom

Because the lid stays closed, the vessel is cleaned through a CIP port on the lid connected to a water supply. Finished product leaves through a valve at the base of the vessel.

Technical specification

Parameter

APKZRJ-50

APKZRJ-100

APKZRJ-500

APKZRJ-1000

Working capacity

50 L

100 L

500 L

1,000 L

Homogenizer motor

3 kW

3 kW

7.5 kW

11 kW

Homogenizer speed

0–3,500 rpm

0–3,500 rpm

0–3,500 rpm

0–3,500 rpm

Mixer motor

0.75 kW

1.5 kW

2.2 kW

3.7 kW

Mixer speed

0–60 rpm

0–60 rpm

0–60 rpm

0–60 rpm

Dimensions

2,750 × 2,100 × 1,900 mm

2,800 × 2,150 × 2,100 mm

3,800 × 2,800 × 2,700 mm

3,900 × 3,400 × 3,150 mm

Heating

Electric (water jacket) or steam

Same

Same

Same

Contact parts

316L, mirror polished

Same

Same

Same

Controls

Siemens PLC and touchscreen

Same

Same

Same

 

Model comparison

Model

Type

Capacity

Homogenizer

Height, lid raised

Best for

APKZRJ

Lid-lift, top homogenizer

10–2,000 L

1.1–22 kW, 0–3,500 rpm

1.7–4.55 m

Creams, lotions and gels; light powders that float

APKZRJ-B

Bottom homogenizer

50–1,000 L

1.1–22 kW, 0–3,500 rpm

1.3–3.6 m

Formulas with heavy powders that settle

APKZRJ-F

Fixed lid

100–1,000 L

1.1–22 kW, 0–3,500 rpm

1.3–3.6 m

Rooms with limited headroom

APKYGJ

Toothpaste mixer

300–2,000 L

5–22 kW, 0–3,500 rpm

3.55–4.55 m

Toothpaste and tooth gels

Choose by your ceiling. A lid-lift model needs up to 4.55 m with the lid raised on a 1,000-litre vessel. If your room is lower, the fixed lid is the one that fits.

Industry Applications

OTC Creams in Large Batches

Hydrocortisone and antifungal creams made in the same vessel batch after batch, cleaned in place between runs.

Medicated Ointments

Ointments mixed and cooled with the lid closed, ingredients added through ports on the lid.

Pain-Relief Gels

Gels made under vacuum in production volumes, in a room without the headroom for a lid-lift machine.

Switching Products

There are no change parts on a vacuum emulsifier. Switching from one product to the next means emptying the vessel, cleaning it and setting new temperatures and speeds.

What changed

What you do

Roughly

Same product, next batch

Discharge, rinse through the CIP port

15–30 minutes

Different product

Discharge, clean through the CIP port

15–30 minutes

Different heating temperature

Set on the touchscreen

Seconds

Different mixing speed

Set on the touchscreen

Seconds

The vacuum is broken through a filtered valve before the product is discharged.

What to Check Before You Buy

01

Your batch size, not the vessel size

A vessel is never filled to the top. Ask for the working capacity and size the machine to your usual batch, not your largest one.

02

What you lose with a fixed lid

A fixed lid saves headroom, but the vessel can't be opened up. Ask how ingredients go in, how it's cleaned, and how you'll inspect the inside.

03

How you'll heat it

Electric heating works anywhere. Steam is faster on large vessels but needs a steam supply. Confirm which you have, and confirm your voltage before the machine is built.

Why Choose AIPAK?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

We Look at Your Formula First

Send us your formula, or just what you’re making and how big your batches are, and we’ll tell you which model and which size suits it before we quote.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Questions About the APKZRJ-F

Fixed lid or lid-lift — which do I need?

A lid-lift model opens fully, which makes cleaning and inspection straightforward, but it needs headroom for the lid to rise — about 4.55 m on a 1,000-litre machine. A fixed-lid model only needs its own height, but the vessel stays closed. If your ceiling is the limit, choose the fixed lid. If you want to open the vessel, choose lid-lift.

How are ingredients added if the lid doesn't open?

Through ports on the lid. With the vessel under vacuum, liquids and powders are drawn in through those ports, so nothing has to be opened during a batch.

Can powders be added under vacuum?

Yes. Powders are drawn into the closed vessel through a port on the lid, the same way as liquids. For formulas with a heavy powder load that settles, the bottom-homogenizer APKZRJ-B is usually the better choice.

How is the vessel cleaned?

In place, through a CIP port on the lid connected to your water supply. The vessel stays closed while it’s cleaned, and goes straight back into production.

How is the product discharged?

Through a valve at the base of the vessel.

What batch sizes are available?

From 100 to 1,000 litres per batch. For smaller batches, or batches up to 2,000 litres, see the lid-lift APKZRJ.

What do I give up with a fixed lid?

The ability to open the vessel fully. You can’t lift the lid to inspect the inside, reach the mixer by hand or scrape out the last of a batch. That suits products made the same way batch after batch, like OTC creams and ointments. If you change products often or need to look inside regularly, the lid-lift APKZRJ is the better fit.

Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send Us Your Formula — or Just Your Batch Size

Three things decide which emulsifier you need. Your batch size decides the capacity. Your ceiling height decides lid-lift or fixed lid — a lid-lift model needs room above the vessel for the lid to rise. And if your formula carries a heavy powder load that settles, that decides where the homogenizer should sit.

Tell us those three and what you’re making, and we’ll point you to the right model. If you can share your formula, even better — we’ll look at it before we quote.

  • Reply within one business day
  • A model matched to your batch, ceiling and formula
  • Your formulation stays with us

No sales calls — we reply by email or WhatsApp, whichever you gave us.

Scroll to Top