APK-280S Twin-Output Premade Pouch Filling Machine — 90 to 120 a Minute

Two pouches picked, opened, filled and sealed each cycle — for 90 to 140 mm pouches at volume

One pouch per cycle is what limits a single-lane machine. This one runs two lanes side by side: two pouches are picked, opened, filled and sealed together, so output goes to 90 to 120 a minute without the machine running any faster. The trade-off is width — each lane takes pouches up to 140 mm — and a 5.1 m frame.

1. Speed: 90 to 120 pouches a minute, twin output

2. Pouch size: 90 to 140 mm wide per lane, 110 to 260 mm long

3. Fill: up to 800 ml per pouch

4. Footprint: 5.1 m long, 2,000 kg — the longest in the horizontal range

Is the APK-280S the right size for you?

✓ Yes, if…

✕ Buy something else if…

Two Lanes, One Cycle

Two pouches travel side by side through every station — picked together, opened together, filled and sealed together. Output doubles without the carriage moving any faster, which is gentler on the machine than simply speeding a single lane up.

Each Lane Checked on Its Own

A sensor at each opening station watches its own lane. If a pouch on one lane fails to open, only that lane’s filler is blocked for the cycle — the other lane keeps running. One bad pouch doesn’t stop both.

Pouch Magazine Isolated from the Sealing Jaws

The pouch magazine sits on its own mount rather than the main frame, away from the vibration of the sealing jaws. At 120 pouches a minute that’s what keeps pouches from shifting in the stack and being picked two at a time.

Two Filling Stations on Each Lane

The dose is split across two stations on each lane. Each drop is smaller, so a light powder has time to settle between them instead of billowing up into the pouch mouth — and the second station can top up to the target weight. With two lanes running, that’s four filling points working in the same cycle.

Three-Stage Top Seal

Both pouches are sealed across three pairs of heated jaws in sequence, then set by cooling jaws. At up to 120 pouches a minute, each pair of jaws has only a short time on the film. Spreading the seal over three stages gives it the heat a single pass wouldn’t have time to deliver.

Technical specification

Parameter

APK-280S

What it means for you

Output

Twin — two pouches per cycle

—

Pouch width

90–140 mm per lane

Twin output halves the width available to each pouch

Pouch length

110–260 mm

—

Max fill

800 ml per pouch

Twice the APK-180S twin version

Speed

90–120 pouches/min

—

Pouch types

Stand-up, flat

—

Power

4.5 kW

—

Frequency / voltage

60 Hz, built to your U.S. supply

We confirm the voltage with your quote

Air

500 NL/min

The highest air draw in the horizontal range

Dimensions

5,100 × 980 × 1,400 mm

The longest in the horizontal range

Weight

2,000 kg

Check your floor loading

 

Model comparison

Model

Pouch width

Max fill

Speed

Power

Length

APK-180S

60–180 mm

400 ml

60–80/min

2.3 kW

2.25 m

APK-180D

60–180 mm

400 ml

120–160/min

2.3 kW

2.25 m

APK-210Z

90–210 mm

1,200 ml

40–60/min

4.5 kW

3.2 m

APK-240S

100–240 mm

1,500 ml

40–60/min

4.5 kW

3.2 m

APK-280S

90–140 mm

800 ml

90–120/min

4.5 kW

5.1 m

Every machine in this group fills printed pouches you buy in. If you'd rather make the pouch from roll film, see our doypack machines — lower cost per bag, longer machine.

Production Applications

Single-SKU powder at volume

One product running for long stretches, where one lane at 60 a minute isn’t enough and the pouch stays under 140 mm.

Collagen and creatine pouches

Fine, free-flowing powders in mid-size stand-up pouches, run in high volume.

Electrolyte and drink-mix multi-serve pouches

A 30-serving pouch of the same flavor, run for weeks at a time. That’s exactly the job twin output is built for — one product, one pouch size, and more pouches a shift than a single lane can give.

Contract packing a high-volume SKU

A client product that runs every week in the same pouch, where output per shift decides the margin.

What changing over involves

What changed

What you adjust

Roughly

Same pouch, next batch

Reload the magazine

A few minutes

Pouch width

Gripper spacing on handwheels with a scale

15–30 minutes

Pouch length

Guide height

15–30 minutes

Powder → granule

Dosing unit — auger to cup

15–30 minutes

This is the reason to buy premade pouches rather than film: a size change is an adjustment on this machine, not a new set of forming parts.

Two lanes means two sets of grippers to set when the pouch size changes. If you change size often, a single-lane machine will cost you less in downtime.

What to check before you buy

01

What a size change actually takes

Ask any supplier how a pouch-width change is done — handwheels and a scale, or a new set of parts — and time it on their floor, not in their brochure.

02

Whether it opens zippers

Not every premade pouch machine does. If your pouches have a zipper, ask for the zipper-opening station by name.

03

Installation and training

Ask what's included and what costs extra.

Why Buy From AIPAK?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

We Run Your Pouch and Powder Before You Order

Send us a few empty pouches and a sample of your powder. We open, fill and seal them on the machine and send them back. You decide whether to talk quotes after that.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Product Technical FAQ for APK-280S Premade Pouch Filling Machine

How does twin output double the rate?

Two pouches are picked, opened, filled and sealed in the same cycle, on two lanes side by side. The carriage doesn’t move faster — it just carries two pouches instead of one. That’s how the output reaches 90 to 120 a minute without pushing the mechanics harder.

What happens if a pouch fails to open on one lane?

Each lane has its own sensor at the opening station. If a pouch on one lane isn’t open, that lane’s filler is blocked for the cycle and no powder is dropped. The other lane keeps running.

APK-280S or the twin-output APK-180S?

Both run two lanes. The 180S twin version is faster — 120 to 160 a minute — and 2.9 m shorter, but each pouch holds up to 400 ml. The 280S holds up to 800 ml at 90 to 120 a minute. Choose on fill volume first, then speed.

Twin output or a single wide lane?

Twin output if your pouch is under 140 mm and you need volume. If your pouch is wider — up to 210 mm or 240 mm — a single-lane machine like the APK-210Z takes it, at 40 to 60 a minute.

Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send Us Your Pouch and Your Target Output

Two numbers decide whether twin output is right for you. Your pouch has to stay within 140 mm wide and 800 ml, because two lanes share the machine’s width. And you need more than a single lane can give — over 60 pouches a minute. If only one of those is true, a single-lane machine will probably suit you better.

Send us a few empty pouches and a powder sample. We’ll open, fill and seal them and send them back, so you can check the seal and the fill weight on your own pouch before you order.

  • Reply within one business day
  • Your pouch and powder run on the machine before you order
  • Your formula and artwork stay with us

No sales calls — we reply by email or WhatsApp, whichever you gave us.

Scroll to Top