APC-A160B Bottle Unscrambler with Air-Assisted Orientation

Same range and speed as the A160, with fewer misfeeds reaching the conveyor

This machine runs the same bottle range and the same speed as the APC-A160 — 50 to 300 ml at 60 to 160 a minute. What it adds is an air jet at the point of transfer, working alongside the mechanical reversing mechanism, plus screen-based operation instead of push-button control. The reason to specify it is accuracy, not throughput.

1. Air-assisted orientation: an air jet works with the mechanical mechanism to reduce misoriented bottles

2. Screen control: parameters set on screen, so settings reproduce exactly on the next run

3. Same range and speed as the A160: 50 to 300 ml at 60 to 160 bottles per minute

4. Requires compressed air: unlike every other model in this range

Is this the right machine for you?

✓ Yes, if…

✕ Look elsewhere if…

Air-Assisted Orientation

The A160B keeps the mechanical bottle-reversing mechanism and adds a compressed-air jet acting at the point of transfer. Bottles the mechanism leaves marginally out of position are corrected by the air before they reach the conveyor. The improvement is most visible at the top of the speed range, where mechanical orientation has the least time to work.

Screen-Based Operation

Parameters are entered and displayed on screen rather than set by knob. When you return to a container you ran last month, you enter the same numbers instead of re-tuning by feel, so a repeat changeover takes less time than the first.

Bottle-Collecting Device

A collecting device holds a short buffer of oriented bottles ahead of the conveyor. When the counting machine pauses for a bottle change or a brief stop, the unscrambler does not stop with it — the buffer absorbs the gap and the line keeps its rhythm.

304 Stainless Steel, No Dead Corners

Frame and body in 304 stainless steel throughout, structured so there are no dead corners where dust or debris collects. Washes down and disinfects without disassembly.

Technical specification

Specification

APC-A160B

What it means for you

Output

60 – 160 bottles/min

Same as the APC-A160

Bottle volume

50 – 300 ml

Covers 60, 100, 120 and 250 ml supplement bottles

Bottle shape

Round

Square or irregular? See the APC-2000

Bottle material

Plastic

Glass needs the APC-SP1

Orientation

Mechanical bottle-reversing mechanism plus an air jet at transfer

Fewer misoriented bottles reach the conveyor

Outlet control

Quantity detection with overload protection

Feeds at the rate your line consumes

Power

0.15 kW, 60 Hz

Built to your U.S. supply. We confirm the voltage with your quote

Compressed air

Required

The only round-bottle model in this range that needs an air supply

Dimensions

1,050 × 1,150 × 1,250 mm

Add clearance for hopper loading and cleaning

Weight

300 kg

No special foundation

Construction

304 stainless steel

Frame and body, no dead corners

Control

Screen-based operation

Settings recalled numerically, not re-tuned by feel

 

Model comparison

Model

Bottle volume

Output

Bottle shape

Air

Best for

APC-SP1

15–750 ml

20–80/min

Round, square, flat-square

No

Glass bottles, large containers, frequent bottle changes

APC-A100

15–150 ml

30–100/min

Round

No

Small supplement and dispensing bottles

APC-A160

50–300 ml

60–160/min

Round

No

Standard supplement bottles, highest throughput

APC-A160B

50–300 ml

60–160/min

Round

Yes

Same range and speed, with air-assisted orientation

APC-2000

15–500 ml

40–150/min

Round, square, flat, irregular

Yes

Square and irregular plastic bottles

Start with your bottle, not with speed. Volume sets the shortlist; shape can rule out four of the five; and whether it’s glass decides the question before either.

Note that the APC-2000 is rated below the APC-A160 despite being the more capable machine. That’s because its range covers mixed bottle shapes, not because it’s the slower unit on round containers.

Ideal Applications & Industries

Multi-Shift Continuous Production

On a line running two or three shifts, a small misfeed rate compounds into many operator interventions per day. Air-assisted orientation cuts that rate.

Pre-Decorated and Printed Bottles

When the container arrives already printed or labeled, a damaged or rejected bottle costs several times what a plain bottle costs.

Lines Running With Minimal Supervision

Where one operator covers several stations, the unscrambler needs to run without someone standing at it.

Frequent Product Changeovers

Screen-based operation stores and recalls settings numerically, so returning to a previous bottle reproduces the same parameters instead of re-tuning by hand.

Contract Manufacturing

CMOs run other companies’ containers, where a scuffed or rejected bottle is a client conversation, not just an internal loss.

Where This Machine Sits on Your Line

SEVEN STATIONS, ONE LINE

Station 1

Bottle Unscrambler

Orients bottles neck-up and feeds them onto the conveyor.

Station 2

Bottle Air Cleaner

Ionized air removes static; vacuum draws out dust before filling.

Station 3

Counting Machine

Counts and fills. Sets the pace of the whole line.

Station 4

Desiccant or Cotton Inserter

Adds moisture control or fill material on top of the product.

Station 5

Capping Machine

Applies and torques the cap; rejects crooked and reversed caps.

Station 6

Induction Sealer

Bonds the foil liner to the bottle mouth.

Station 7

Labeler

Applies the label and discharges the finished bottle.

The unscrambler feeds the line, but the counting machine sets its pace. A mid-speed line runs 40 to 100 bottles per minute; a high-speed line runs 70 to 160. Both fit in under 30 m² with roughly three operators and a single compressed air supply.

You do not need to buy the whole line at once. Most customers start with the counting machine and add stations as volume grows — the counter is the one machine that has to be right from the start, because everything else is timed to it.

What changing over involves

Bottle size changes are an adjustment, not a parts change

What changed

What you adjust

Roughly

Same bottle, different product

Nothing on this machine

—

Bottle diameter or height changes

Guides and the outlet, by hand

15–30 minutes

Bottle shape changes entirely

Different machine, not a changeover

—

There are no change parts to buy per bottle size, and none to store on a shelf.

One honest note: this is the unscrambler. On a full line the guide rails, the capping chuck and the label recipe all change too — four jobs at four stations. Ask us for the line number, not just this one.

What to check before you buy

01

Whether anyone has run your bottle

Round is not one shape. A slight taper, an oval cross-section, or a molding seam all change how a bottle behaves against the disc. Ask any supplier to run your actual bottle before you order — not a bottle like yours.

02

The manual

A clear English manual gets your operator running in a week instead of a month. Ask to see a sample page before you order.

03

Installation and training

Installed, commissioned, and your people taught to run it. Ask what's included and what costs extra — the answer varies more between suppliers than the machine price does.

Why buy from us?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

We Run Your Bottle Before You Order

Send us your bottles and we’ll run them on the machine and send you the video. You decide whether to talk quotes after that.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Deep Dive FAQ

What are the installation requirements?

0.15 kW of power, built to your U.S. supply. Floor space of 1,050 × 1,150 mm plus working clearance, and a compressed air supply for the air jet. No cooling water. The machine weighs 300 kg.

How does the unscrambler synchronize with the counting machine?

Detection at the bottle outlet regulates output to match what the line is consuming, so bottles arrive at the counter infeed at a steady rate instead of surging and starving.

Can I buy this on its own, or only as part of a line?

Either. Many customers buy the counting machine first and add the unscrambler when hand-feeding becomes the constraint. Send us your bottle dimensions and target output and we will confirm the configuration.

What is the difference between the APC-A160 and the APC-A160B?

Same bottle range, same speed, same footprint. The A160B adds a compressed-air jet at the transfer point working alongside the mechanical reversing mechanism, and screen-based operation in place of push-button control. The difference is orientation accuracy, not throughput.

Is the A160B worth the extra cost over the A160?

It depends on two things. First, what an operator intervention costs you — on a single-shift line with an operator nearby, the mechanical A160 is usually enough. On a line running across multiple shifts, misfeeds compound. Second, what your bottle costs: a printed or pre-labeled container is worth more to orient correctly than a plain one. If neither applies, buy the A160 and put the difference into the counting machine.

How much does the air assist actually improve orientation?

The air jet acts at the moment the bottle transfers to the conveyor, correcting bottles that the mechanical mechanism has left marginally out of position. The improvement is most visible at the top of the speed range, where mechanical orientation has the least time to work.

Do I need a separate compressor for the air jet?

If your line already runs a capping machine or induction sealer, both need compressed air and the same supply usually serves the unscrambler.

Why does screen control matter on an unscrambler?

Because you will change bottles. With knob adjustment, returning to a previous container means re-tuning by feel. With screen-based settings, the parameters that worked last time are entered as numbers and reproduced exactly.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Do your machines meet U.S. electrical certification requirements?

Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.

Not sure which model?

Tell us your bottle volume and shape. We’ll tell you which one, and why.
Send us a sample bottle
We run it on the machine before you order and send you the result. Round is not one shape — a taper or a seam changes how it behaves.
Send your floor dimensions
Length, width, height, and where the doors and columns are. We’ll lay out your line and check the space for free.

Reply within one business day. Send us a sample bottle and we’ll run it before quoting.

Scroll to Top