Home » APC-A100 Small Bottle Unscrambler
APC-A100 Small Bottle Unscrambler — 15 to 150 ml
Built for the bottle sizes standard unscramblers misfeed
Small bottles are where most unscramblers struggle. Below about 50 ml a container has too little mass to orient reliably on a machine built for standard bottles — it tips, it rides on its neighbors, and misfeeds pile up at the conveyor. This machine is dimensioned for that range: 15 to 150 ml at 30 to 100 bottles a minute.
1. Bottle volume: 15 to 150 ml, the smallest range we supply
2. Output: 30 to 100 bottles per minute
3. No compressed air: mechanical orientation
4. Footprint: 950 × 950 mm, the smallest automatic unscrambler in the range
Is this the right machine for you?
✓ Yes, if…
- Your bottles are round and under 150 ml
- You need up to 100 bottles a minute
- Floor space is tight — this is the smallest automatic unscrambler we supply
- Your counting machine is 8 to 24 channels
✕ Look elsewhere if…
- Your bottles are 50 to 300 ml → the APC-A160 runs 60 to 160, faster than this one
- Your bottles are glass → use the APC-SP1
- Your bottles are square or irregular → see the APC-2000
- You need more than 100 bottles a minute → the APC-A160
Automatic Bottle-Reversing Mechanism
Bottles entering upside-down are turned neck-up by a mechanical reversing mechanism rather than an air jet. Fewer utilities to connect at the head of the line, nothing to clog, and no air consumption added to your line’s total. For conventional round bottles this handles orientation reliably at full speed.
Sized for Small Containers
Bottle orientation depends on the container having enough mass and height to settle predictably against the disc wall. Below roughly 50 ml that stops being reliable on a standard machine. The A100’s disc geometry and outlet are dimensioned for the small end of the range, which is why it holds its feed rate on 15 and 30 ml bottles where a larger machine would stall.
Outlet Quantity Control and Overload Protection
Detection at the bottle outlet regulates output to match downstream consumption instead of overrunning it. If a bottle jams, overload protection stops the machine rather than forcing bottles through — which is what protects both the bottles and the drive.
304 Stainless Steel, No Dead Corners
Frame and body are 304 stainless steel throughout, with the structure designed so there are no dead corners where dust or debris can collect. The machine washes down and disinfects without disassembly.
Technical specification
Specification | APC-A100 | What it means for you |
Output | 30 – 100 bottles/min | Matched to counters up to 24 channels |
Bottle volume | 15 – 150 ml | The only machine in our range reaching down to 15 ml |
Bottle shape | Round | — |
Bottle material | Plastic | Glass needs the APC-SP1 |
Orientation | Mechanical bottle-reversing mechanism | No air required |
Power | 0.15 kW, 60 Hz | Built to your U.S. supply. We confirm the voltage with your quote |
Compressed air | Not required | — |
Dimensions | 950 × 950 × 1,000 mm | The smallest automatic unscrambler we supply |
Weight | 220 kg | — |
Construction | 304 stainless steel | — |
Model comparison
Model | Bottle volume | Output | Bottle shape | Air | Best for |
APC-SP1 | 15–750 ml | 20–80/min | Round, square, flat-square | No | Glass bottles, large containers, frequent bottle changes |
APC-A100 | 15–150 ml | 30–100/min | Round | No | Small supplement and dispensing bottles |
APC-A160 | 50–300 ml | 60–160/min | Round | No | Standard supplement bottles, highest throughput |
APC-A160B | 50–300 ml | 60–160/min | Round | Yes | Same range and speed, with air-assisted orientation |
APC-2000 | 15–500 ml | 40–150/min | Round, square, flat, irregular | Yes | Square and irregular plastic bottles |
Start with your bottle, not with speed. Volume sets the shortlist; shape can rule out four of the five; and whether it’s glass decides the question before either.
Note that the APC-2000 is rated below the APC-A160 despite being the more capable machine. That’s because its range covers mixed bottle shapes, not because it’s the slower unit on round containers.
Ideal Applications & Industries
Small-count supplement bottles
30 and 60-count vitamin and probiotic bottles usually land in the 30 to 100 ml range, below where standard unscramblers orient reliably.
Sample, trial and travel sizes
Short runs of small containers, often alongside a main product line.
Concentrated extracts in small fills
Small counts of high-value supplements. Fewer units per bottle means the container is a larger share of packaging cost, so a misfed or scuffed bottle costs more here.
Contract packing of small bottles
Bottle changeover is adjustment rather than a parts change, which matters when you switch between clients’ small containers several times a week.
Where This Machine Sits on Your Line
SEVEN STATIONS, ONE LINE
Desiccant or Cotton Inserter
Adds moisture control or fill material on top of the product.
The unscrambler feeds the line, but the counting machine sets its pace. A mid-speed line runs 40 to 100 bottles per minute; a high-speed line runs 70 to 160. Both fit in under 30 m² with roughly three operators and a single compressed air supply.
You do not need to buy the whole line at once. Most customers start with the counting machine and add stations as volume grows — the counter is the one machine that has to be right from the start, because everything else is timed to it.
What changing over involves
Bottle size changes are an adjustment, not a parts change
What changed | What you adjust | Roughly |
Same bottle, different product | Nothing on this machine | — |
Bottle diameter or height changes | Guides and the outlet, by hand | 15–30 minutes |
Bottle shape changes entirely | Different machine, not a changeover | — |
There are no change parts to buy per bottle size, and none to store on a shelf.
One honest note: this is the unscrambler. On a full line the guide rails, the capping chuck and the label recipe all change too — four jobs at four stations. Ask us for the line number, not just this one.
What to check before you buy
Whether anyone has run your bottle
Round is not one shape. A slight taper, an oval cross-section, or a molding seam all change how a bottle behaves against the disc. Ask any supplier to run your actual bottle before you order — not a bottle like yours.
The manual
A clear English manual gets your operator running in a week instead of a month. Ask to see a sample page before you order.
Installation and training
Installed, commissioned, and your people taught to run it. Ask what's included and what costs extra — the answer varies more between suppliers than the machine price does.
Why buy from us?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Run Your Bottle Before You Order
Send us your bottles and we’ll run them on the machine and send you the video. You decide whether to talk quotes after that.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Deep Dive FAQ
0.15 kW of power, built to your U.S. supply. Floor space of 950 × 950 mm plus working clearance. No compressed air and no cooling water. The machine weighs 220 kg.
Detection at the bottle outlet regulates output to match what the line is consuming, so bottles arrive at the counter infeed at a steady rate instead of surging and starving.
Either. Many customers buy the counting machine first and add the unscrambler when hand-feeding becomes the constraint. Send us your bottle dimensions and target output and we will confirm the configuration.
15 to 150 ml round bottles — the smallest range in our unscrambler line. If your containers are 50 to 300 ml, the APC-A160 runs faster at 60 to 160 bottles per minute. Above 300 ml, or in glass, the APC-SP1 covers up to 750 ml.
Slowing a standard machine does not fix the underlying issue — a 15 ml bottle lacks the mass to orient consistently against a disc sized for 300 ml containers, at any speed. The A100’s disc geometry and outlet are dimensioned for the small range, which is why it holds its feed rate rather than trading speed for reliability.
The A100. Both machines list 50 ml at the boundary, but the A100 is the one dimensioned for it — at 40 ml you are below where the A160’s geometry works well, and running it there means misfeeds rather than a slightly lower rate.
No. Orientation is mechanical. That means one less utility to route to the head of the line and nothing to clog.
Overload protection stops the machine rather than forcing bottles through. Clearing a jam is manual, but the machine will not damage bottles or the drive trying to push past one.
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.
Customers Also Interested In...
Not sure which model?
Tell us your bottle volume and shape. We’ll tell you which one, and why.
Send us a sample bottle
We run it on the machine before you order and send you the result. Round is not one shape — a taper or a seam changes how it behaves.
Send your floor dimensions
Length, width, height, and where the doors and columns are. We’ll lay out your line and check the space for free.
Reply within one business day. Send us a sample bottle and we’ll run it before quoting.