Home » APK-SL150 Shrink Sleeve Applicator | 150 Bottles a Minute
APK-SL150 Shrink Sleeve Applicator — Up to 150 Bottles a Minute
Tamper-evident neck bands for bottles Ø25 to 125 mm, without compressed air
A foil seal under the cap tells your customer the bottle wasn’t opened — but only after they’ve opened it. A band over the cap tells them before they buy. This machine cuts film from a roll, opens it and drops it over the neck, up to 150 bottles a minute. The tunnel that follows shrinks it down.
Speed — up to 150 bottles a minute
Bottle diameter — Ø25 to 125 mm, across three knife plate ranges
No compressed air — one less utility at this station
Power — three-phase, 50/60 Hz, 3 kW
Trial run on your own bottles before you order | Installation and training | Spare blades in your quote
Is this the right machine for you?
✓ Yes, if…
- You bottle supplements and want a visible tamper feature over the cap
- Your bottles are Ø25 to 125 mm
- Your line runs up to 150 bottles a minute
- You run PVC, PET or OPS film
- You have three-phase power at this station
✕ Buy something else if…
- Your line runs 50 bottles a minute or less → the APK-SL50 costs less and runs on single-phase power
- You only need the tunnel → if you already have an applicator, see the APK-SH7 and APK-SH15
- You want the band to carry your artwork → a band is a tamper feature, not a label. For printed sleeves that wrap the body, tell us — the same machine does it with a longer cut, but the film and the tunnel both change
- Your bottle is over Ø125 mm or 350 mm tall → outside the range. Send us the dimensions and we'll tell you honestly
Nothing Sticks to the Bottle
The film arrives as a flat tube on a roll. The machine opens it, cuts it to length and drops it over the neck. Nothing is glued and nothing presses on the bottle, which is why the same machine handles glass and PET without changing anything but the knife plate.
Three Knife Plate Ranges
Ø25–50, Ø51–90 and Ø91–125 mm. The plate matches the film diameter to your bottle, so the band drops cleanly instead of catching on the cap. Your bottle range decides how many plates you need — tell us all your sizes and we’ll quote them together.
Servo Film Feed and Servo Knife
Feed and cutting each run on their own servo, so the cut length holds at 150 bottles a minute rather than drifting as the roll empties. Cut length is set on the touchscreen from 25 to 300 mm.
No Compressed Air
This machine needs power and nothing else. On a line where the capper and the filler are already drawing air, that’s one less demand on your compressor — and one less thing to plumb at the end of the line.
Technical specification
Specification | APK-SL150 | What it means for you |
Type | Linear | Feeds in line with your conveyor |
Speed | 0–150 bottles/min | Your rate depends on your bottle and film — we confirm it on your samples |
Bottle diameter | Ø25–125 mm | Across three knife plate ranges |
Bottle height | up to 350 mm | — |
Knife plate ranges | Ø25–50 / Ø51–90 / Ø91–125 mm | One plate covers one range. Tell us your full bottle range |
Cut length | 25–300 mm | 25–50 mm covers a neck band; longer cuts reach the shoulder or the body |
Sleeve position | Cap seal, shoulder, middle body, full body | Same machine, different cut length and film |
Film materials | PVC, PET, OPS | — |
Film thickness | 0.035–0.080 mm | — |
Roll core | 5″–10″ | Standard rolls, bought locally |
Bottle materials | PET, PVC, glass, metal, HDPE, PP, PS | Nothing touches the bottle under pressure, so glass runs like plastic |
Compressed air | Not required | One less utility at this station |
Power | Three-phase, 50/60 Hz, 3 kW | Built to your U.S. supply. We confirm the voltage with your quote |
Construction | SUS304 | — |
Dimensions | 2,000 × 910 × 1,800 mm | Add clearance for roll loading |
Weight | 600 kg | No special foundation |
Controls | PLC, touchscreen, inverter and servos | — |
Model comparison
Model | Function | Speed | Bottle Ø | Bottle height | Power |
APK-SL50 | Applicator | 50 bottles/min | 28–120 mm | up to 250 mm | single-phase, 3 kW |
APK-SL150 | Applicator | up to 150 bottles/min | 25–125 mm | up to 350 mm | three-phase, 3 kW |
APK-SH7 | Shrink tunnel | 0–35 m/min | up to 100 mm | up to 280 mm | 7 kW |
APK-SH15 | Shrink tunnel | 0–45 m/min | up to 125 mm | up to 350 mm | 15 kW |
Buy the pair. An applicator without a tunnel leaves the band sitting loose on the neck.
And size the tunnel first. The applicator takes a wider bottle range than the tunnel does — on the APK-SH7 the ceiling is Ø100 mm, where the applicator would go to 125.
Ideal Applications & Industries
Supplement bottles with a foil seal
The band goes on after capping and sealing, crossing the gap between cap and neck. Two tamper features on one line, and the band is the one your customer sees on the shelf.
Gummy and powder jars
Wide-mouth jars where the cap is the widest point on the container. Check the cap diameter, not the bottle diameter — that’s what the band has to clear.
Amber glass for herbals and tinctures
Glass runs on the same machine as plastic. Nothing presses on the container and nothing is glued to it.
Bottles that ship long distance
A band that arrives torn tells your distributor the bottle was handled. That’s the point of it — and it’s why the shrink has to be tight, not just present.
Changeover
Film size changes on the screen. Bottle diameter changes the knife plate.
What changed | What you adjust | Roughly |
Same bottle, new film roll | Load the roll, set the cut length | A few minutes |
Band length changes | Cut length on the touchscreen | A few minutes |
Bottle diameter moves within one knife plate range | Guides and centring post, on handwheels | 15–30 minutes |
Bottle diameter crosses into another range | Change the knife plate | 15–30 minutes |
Knife plates cover Ø25–50, Ø51–90 and Ø91–125 mm. One plate ships with the machine; tell us your full bottle range and we’ll quote the rest.
The tunnel needs no change parts for a different bottle — only its temperature and belt speed, both set on the panel.
What to check before you buy
The speed on your bottle, not on theirs
Every supplier's headline rate was measured on some bottle. Yours has a different shoulder, a different cap and a different film. Ask any supplier to run your samples and quote the rate they held — we ask for 30 bottles of each size and a 200 m roll of each film before we confirm anything.
The tunnel, not the applicator
The applicator takes a wider range of bottles than the tunnel does. Check the tunnel's maximum diameter and height against your tallest bottle first — it rules out more machines than speed does.
Installation and training
Our engineer comes to your plant. Travel and on-site costs are quoted separately. Installation isn't free anywhere — it's either a line item or it's inside the machine price. We quote it as a line item so you can see it.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Run Your Bottles Before You Order
Send us 30 bottles of each size and a 200 m roll of each film. We band them, shrink them and send you the finished bottles, with the rate we held.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Questions About the APK-SL150
A label is glued to the bottle and carries your artwork. A band is a tube of film dropped over the cap with nothing holding it on until heat shrinks it. Its job is to show whether the cap has been turned.
Most brands run both. The foil seal sits under the cap and proves the product is intact. The band sits over the cap and is what a customer sees before buying.
We won’t know until we run it. Bottle shape, cap profile and film all change the rate. Send us 30 bottles of each size and a 200 m roll of each film, and we’ll tell you the rate we held — not a headline number.
No. Power only.
One for each diameter range your bottles fall into: Ø25–50, Ø51–90, Ø91–125 mm. If all your bottles sit in one range, one plate covers them. Tell us every size you run and we’ll quote it properly rather than leaving you to discover it later.
The machine cuts from 25 to 300 mm, so yes. But a full-body sleeve is a different job: the film is thicker, the artwork has to register, and the tunnel matters much more. Tell us which you’re planning before we quote.
PVC, PET or OPS, 0.035 to 0.080 mm thick, on rolls with a 5 to 10 inch core. Standard stock you buy locally.
Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Customers Also Interested In...
Send us bottles and film. Then we'll talk speed.
The rate any supplier quotes you is a rate on their bottle, not yours. Send us 30 bottles of each size and a 200 m roll of each film, and we’ll run them and tell you the rate we can hold — before you order, not after.
- Reply within one business day
- Trial run on your own bottles
- Your artwork and specs stay with us