Home » APC-T1 Round Bottle Labeling Machine
APC-T1 Round Bottle Labeling Machine
The APC-T1 wraps a self-adhesive label around round bottles as they pass through, at 20 to 120 bottles per minute. It’s the last station on a counting and bottling line, and the one your customer actually sees. If your labels go on crooked or wrinkled, this is what fixes it.
- 20 to 120 bottles per minute — keeps pace with any counting line up to 120 bpm
- Round bottles of any size in the range — no change parts to swap between diameters
- Pre-feed label system — the label is staged before it’s applied, so it lands flat and square
Direct from our factory | Lead time confirmed in your quote | Installation and training available | Spare parts listed in your quote
Is the APC-T1 the right labeler for your line?
✓ This is a fit if…
- You're labeling round bottles — supplement bottles, HDPE jars, PET containers
- Your line runs up to 120 bottles per minute
- You need one wrap-around label per bottle, front or full-circumference
- You want a batch code or expiry date printed on the label as it's applied
- You run several bottle diameters and don't want to buy change parts for each
✕ Look elsewhere if…
- Your bottles are square, flat or oval → the APC-T2 handles two, three and four-sided labeling on square bottles
- You're labeling the top of a box or a lid → that's the APC-T3 top face labeler
- You're labeling ampoules or oral liquid vials → the APC-T4 runs those horizontally, at 100 to 200 per minute
- Your line runs faster than 120 bottles per minute → tell us your rate and we'll quote the configuration that keeps up
- You need front and back labels on a round bottle → that's a different feed arrangement. Send us your bottle and label artwork and we'll confirm what it takes
- Your labels are on sheets, not a roll → this machine feeds from a roll only
Technical specification
Parameter | Value | What this means for you |
Labeling speed | 20 – 120 bottles / min | Match this to your capper and sealer, not your counter |
Container type | Round bottles | Square or flat bottles need the APC-T2 |
Container diameter range | 15 – 130 mm | Your bottle has to fall inside this |
Label width range | 15 – 130 mm | Check against your artwork |
Label roll core / outer diameter | 76 mm (3 inch) | Confirm with your label printer before you order |
Labeling accuracy | ±1 mm (Depending on bottle and label squareness) | How square the label lands, bottle after bottle |
Coder | Optional: ribbon date coder or thermal transfer printer (TTO) | Prints the batch number and dates on the label as it’s fed |
Power | 0.15 kW, 60 Hz | Built to your U.S. supply. We confirm the voltage with your quote |
Compressed air | 0.4 MPa, 0.2 m³/h | Small demand — most existing compressors cover it |
Machine dimensions | 2000 × 700 × 1650 mm | Add conveyor length either side |
Machine weight | 280 kg | — |
The 2000 mm length is the machine itself. Allow conveyor run-in and run-out on both sides so bottles are travelling straight before they reach the applicator.
Model comparison
Model | Speed | Containers | Best for… |
|
APC-T1 | 20–120 btl/min | Round bottles | One wrap-around label on a round bottle | You are here |
APC-T2 | 20–120 btl/min | Square, flat and round bottles | Two, three or four-sided labeling on square containers | |
APC-T3 | 20–120 pcs/min | Flat surfaces | Labeling the top face of boxes, lids and trays | |
APC-T4 | 100–200 btl/min | Ampoules, oral liquid vials | Small vials handled horizontally at higher speed |
All four use the same pre-feed label system and tensioned web. What changes is how the container is presented to the applicator.
Pre-feed label system
The label is staged and held before the bottle arrives, rather than being pulled from the roll at the moment of application. That’s what keeps label position repeatable at speed.
You see the difference at the end of a shift, not at the start. A machine that pulls labels on demand drifts as the roll diameter shrinks. A pre-feed system doesn’t.
Tensioned web
The label web runs under controlled tension between the roll and the applicator. Two things depend on it: the coder prints cleanly because the web isn’t slack, and every label is fed to the same length.
Slack web is the usual cause of smeared batch codes and labels that start at slightly different points down a run.
Roll-on application matched to the bottle
The roll-on mechanism is configured to the shape of your bottle. A tall narrow bottle and a short wide one don’t press the same way, and using one arrangement for both is how you get wrinkles at the leading edge.
Tell us your bottle dimensions and we set this up before the machine ships.
Ideal Applications & Industries
Supplement bottles with full-wrap labels
A full-circumference label has to meet itself with no overlap gap and no wrinkle. Most complaints about “the label looks cheap” come down to the leading and trailing edge, not the artwork.
Bottles with a batch code and expiry date
The coder prints on the label as it’s fed, before it reaches the bottle. The web tension is what keeps the print legible — a slack web smears the code, and a smeared code is a rejected batch.
Small dropper and tincture bottles
A 30 ml bottle has very little label real estate and very little tolerance. The label has to start and finish in the right place because there’s nowhere for the error to hide.
What changing over involves
What you changed | What gets adjusted | Roughly how long |
New label roll, same bottle | Load the roll, thread the web | 15–60 minutes |
Different label size, same bottle | Label length setting, coder position | 15–60 minutes |
Different bottle diameter | Conveyor guides, applicator height and pressure | 15–60 minutes |
Different bottle height | Applicator height, label position setting | 15–60 minutes |
Diameter changes are adjustments, not parts. You reposition the guides and the applicator. There’s no change-part kit to buy per bottle size, which is what makes this machine work for contract packing.
Keep a settings sheet by the machine. Applicator height, label length and coder position for each SKU. Written down, a repeat changeover takes a fraction of the first one.
Label supply changes matter more than they look. A different backing paper thickness or a different core diameter changes how the web feeds. If you switch label printers, run a test before you run a batch.
Three things to check before you buy any labeling machine
Label placement, bottle after bottle
One label applied straight in a demo proves nothing. Ask how consistent placement is across a full roll, as the roll diameter shrinks. We run your bottles with your labels at factory acceptance testing before the machine ships, and you see the results.
The manual
Your operator threads the web, sets label length and adjusts the applicator. They need an English manual with the settings procedure in it — not a translated parts list. Ask to see it before you order.
Installation and training
The machine runs out of the crate. Getting it labeling cleanly across all your SKUs takes someone who's set one up before. Our engineers install it, dial in each of your bottles, and show your operators how to diagnose a crooked label.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Run Your Container and Label Before You Order
Send us your container and a roll of your label. We run them on the machine and send you photos. You decide whether to talk quotes after that.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Deep Dive FAQ
It depends on your bottle diameter range, your line speed, and whether you need a coder for batch and expiry printing. Send us your bottle and label artwork and we’ll reply within one business day. Most quotes include a layout showing where it fits.
If they’re round and within the diameter range, almost certainly. Send us a bottle and a label roll and we’ll run a sample before you order — we’d rather show you than describe it.
Usually one of three things, and often not the machine. Bottles that aren’t traveling straight when they reach the applicator, a label web that’s running slack, or an applicator arrangement set for a different bottle shape. Check those before you adjust anything else.
A coder can be fitted to print on the label as it’s fed, before it reaches the bottle. Tell us what you need to print and we’ll specify it.
Not on this model — the APC-T1 applies one wrap-around label. For separate front and back labels on a round bottle, or for square bottles needing multiple panels, the APC-T2 is the machine.
Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.
Yes. It’s the last station, after capping and sealing, and it runs on its own conveyor. Tell us your existing conveyor height and belt width and we’ll match it.
Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Customers Also Interested In...
Send us a bottle and a label roll
We’ll run a sample on our own machine and send you a photo before you commit to anything. If your bottle shape needs a different machine, we’ll tell you which one instead of selling you this.
Send your line layout and we’ll show you where the labeler fits and how much conveyor length you need either side.