APC-2000 Bottle Unscrambler for Square and Irregular Bottles

15–500 ml round, square, flat and irregular plastic bottles at 40–150 a minute

Most unscramblers on the market orient round and rectangular bottles only. Anything with a flattened profile, an off-center neck, or a non-uniform cross-section either jams or arrives misoriented — which is why plants running distinctive container shapes often end up hand-feeding a line that is otherwise fully automatic. This machine was built to solve exactly that.

1.Handles irregular shapes: round, square, flat-square and irregular plastic bottles

2.Widest volume range: 15 to 500 ml on one machine

3.Touchscreen and PLC control: counting, parameter storage and display

4.Three-stage design: bottle lifting device, arranging device and mainframe in one unit

Is this the right machine for you?

✓ Yes, if…

✕ Look elsewhere if…

Square, Flat and Irregular Bottles

Most unscramblers on the market orient round and rectangular containers only. Anything with a flattened profile, an off-center neck, or a non-uniform cross-section either jams or arrives misoriented. The APC-2000 was built to solve exactly that, and orients square, flat-square and irregular plastic bottles as reliably as round ones.

Lifting, Arranging and Orienting

A bottle lifting device, a separate arranging device and the unscrambler mainframe are integrated into one unit. Separating lifting from arranging is what allows the machine to handle geometries a single-stage disc cannot — each stage does one job rather than one disc doing all three.

Stored Parameters for Multi-SKU Lines

Counting, parameter storage and on-screen display, with settings adjustable within range. On a plant running several container shapes through one line, recalling stored parameters means a repeat changeover doesn’t start from scratch.

The Widest Volume Range

From small supplement bottles to 500 ml sports nutrition containers on a single unscrambler. For multi-SKU facilities this often removes the need for a second machine dedicated to one end of the range.

Technical specification

Specification

APC-2000

What it means for you

Output

40 – 150 bottles/min

Rated across mixed bottle shapes, not round bottles alone

Bottle volume

15 – 500 ml

The widest range on a single machine

Bottle shape

Round, square, flat-square, irregular

The only model here that handles non-round containers

Bottle material

Plastic

Glass needs the APC-SP1

Orientation

Three-stage: lifting, arranging, mainframe

—

Control

Touchscreen with PLC

Parameters stored and recalled, not re-tuned

Power

0.55 kW, 60 Hz

Built to your U.S. supply. We confirm the voltage with your quote

Compressed air

0.5 MPa, 0.2 m³/min

Required — the mechanical models need none

Dimensions

2,400 × 1,050 × 1,450 mm

Longest machine in this range

Weight

550 kg

—

Model comparison

Model

Bottle volume

Output

Bottle shape

Air

Best for

APC-SP1

15–750 ml

20–80/min

Round, square, flat-square

No

Glass bottles, large containers, frequent bottle changes

APC-A100

15–150 ml

30–100/min

Round

No

Small supplement and dispensing bottles

APC-A160

50–300 ml

60–160/min

Round

No

Standard supplement bottles, highest throughput

APC-A160B

50–300 ml

60–160/min

Round

Yes

Same range and speed, with air-assisted orientation

APC-2000

15–500 ml

40–150/min

Round, square, flat, irregular

Yes

Square and irregular plastic bottles

Start with your bottle, not with speed. Volume sets the shortlist; shape can rule out four of the five; and whether it’s glass decides the question before either.

Note that the APC-2000 is rated below the APC-A160 despite being the more capable machine. That’s because its range covers mixed bottle shapes, not because it’s the slower unit on round containers.

Ideal Applications & Industries

Brand-Differentiated Supplement Packaging

Square and flat-profile bottles are common in premium supplement branding, and they are exactly the shapes most unscramblers cannot orient.

Sports Nutrition and Large-Count Bottles

300 to 500 ml containers for 200 and 300-count products, at the top of the plastic bottle range.

Multi-SKU Facilities

Plants running several container shapes on one line, where buying a separate unscrambler per bottle shape is not practical.

Child-resistant supplement containers

Child-resistant and tamper-evident closures often come on non-round bottles. Send us one before you order and we’ll run it.

Where This Machine Sits on Your Line

SEVEN STATIONS, ONE LINE

Station 1

Bottle Unscrambler

Orients bottles neck-up and feeds them onto the conveyor.

Station 2

Bottle Air Cleaner

Ionized air removes static; vacuum draws out dust before filling.

Station 3

Counting Machine

Counts and fills. Sets the pace of the whole line.

Station 4

Desiccant or Cotton Inserter

Adds moisture control or fill material on top of the product.

Station 5

Capping Machine

Applies and torques the cap; rejects crooked and reversed caps.

Station 6

Induction Sealer

Bonds the foil liner to the bottle mouth.

Station 7

Labeler

Applies the label and discharges the finished bottle.

The unscrambler feeds the line, but the counting machine sets its pace. A mid-speed line runs 40 to 100 bottles per minute; a high-speed line runs 70 to 160. Both fit in under 30 m² with roughly three operators and a single compressed air supply.

You do not need to buy the whole line at once. Most customers start with the counting machine and add stations as volume grows — the counter is the one machine that has to be right from the start, because everything else is timed to it.

What changing over involves

Bottle size changes are an adjustment, not a parts change

What changed

What you adjust

Roughly

Same bottle, different product

Nothing on this machine

—

Bottle diameter or height changes

Guides and the outlet, by hand

15-30mins

Bottle shape changes entirely

Different machine, not a changeover

—

There are no change parts to buy per bottle size, and none to store on a shelf.

One honest note: this is the unscrambler. On a full line the guide rails, the capping chuck and the label recipe all change too — four jobs at four stations. Ask us for the line number, not just this one.

What to check before you buy

01

Whether anyone has run your bottle

Round is not one shape. A slight taper, an oval cross-section, or a molding seam all change how a bottle behaves against the disc. Ask any supplier to run your actual bottle before you order — not a bottle like yours.

02

The manual

A clear English manual gets your operator running in a week instead of a month. Ask to see a sample page before you order.

03

Installation and training

Installed, commissioned, and your people taught to run it. Ask what's included and what costs extra — the answer varies more between suppliers than the machine price does.

Why buy from us?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

We Run Your Bottle Before You Order

Send us your bottles and we’ll run them on the machine and send you the video. You decide whether to talk quotes after that.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Deep Dive FAQ

What bottle sizes and shapes does this handle?

15 to 500 ml plastic bottles: round, square, flat-square and irregular. If all your bottles are round and 50 to 300 ml, the APC-A160 runs faster. Above 500 ml, or in glass, the APC-SP1 covers up to 750 ml.

Does it need compressed air?

Yes, 0.5 MPa at 0.2 m³/min. If your line already runs a capping machine or induction sealer, the same supply usually serves the unscrambler.

Can I run glass bottles?

Automatic unscramblers orient bottles by contact with the machine, which chips and scuffs glass over a production run. For glass we supply the APC-SP1, where the operator places bottles neck-up and no tumbling happens.

How long does a bottle changeover take?

Changing bottle size is adjustment and a stored parameter set, not a parts change. Plan on roughly 15 to 30 minutes.

Can I add this to an existing line?

Yes. It installs at the head of the line and needs 0.55 kW of power, built to your U.S. supply, compressed air at 0.5 MPa and 0.2 m³/min, and 2,400 × 1,050 mm of floor plus clearance. No cooling water.

My bottles are square with an off-center neck. Will this handle them?

Almost certainly — that’s the shape class this machine exists for. Send us the bottle dimensions and a photograph. If the geometry is unusual we’ll ask for sample bottles before quoting. We’d rather test than have you discover the problem at commissioning.

Why is this rated slower than the APC-A160?

Because it’s doing harder work. Orienting a square or irregular bottle takes more of the machine’s travel than a round one, so the rated range reflects the mixed-shape case.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Do your machines meet U.S. electrical certification requirements?

Yes. Our machines are certified and use certified electrical components. Because the exact scope depends on the model and electrical configuration you select, our factory confirms it in writing before production.

Customers Also Interested In...

Not sure which model?

Tell us your bottle volume and shape. We’ll tell you which one, and why.
Send us a sample bottle
We run it on the machine before you order and send you the result. Round is not one shape — a taper or a seam changes how it behaves.
Send your floor dimensions
Length, width, height, and where the doors and columns are. We’ll lay out your line and check the space for free.

Reply within one business day. Send us a sample bottle and we’ll run it before quoting.

Scroll to Top