APK-180S Doypack Machine — Stand-Up Pouches from Roll Film, 90 to 180 mm
Forms, fills and seals stand-up pouches from printed film — with or without a zipper
You’re buying printed stand-up pouches and running the same size for weeks. This machine makes the pouch from a roll of film instead, fills it over two stations and seals it — up to 1,000 ml, 40 to 60 a minute. Film costs less than a finished pouch; the trade-off is a 6 m line.
1. Pouch size: 90 to 180 mm wide, 110 to 250 mm long
2. Zipper version: zipper unwound from its own reel and sealed in as the pouch forms
3. Two filling stations: with a vibrator between them for light powders
4. Speed: 40 to 60 pouches a minute
Is the APK-180S the right size for you?
✓ Yes, if…
- You run one pouch size for long stretches and pouch cost is a real line item
- Your pouch is 90 to 180 mm wide
- You want a zipper made into the pouch rather than bought in
- You have 6 m of floor and 9 kW at this station
✕ Buy something else if…
- You run several pouch sizes → a premade pouch machine changes size with an adjustment
- Your pouch is under 130 mm and you don't need a zipper → the APK-130S is 1.5 m shorter
- Your pouch is wider than 180 mm → the APK-240S goes to 240 mm
- Your product is a liquid or a gel → we build these machines for powders and granules
Film In, Stand-Up Pouch Out
The machine unwinds printed film, punches the bottom, folds it into a stand-up pouch, seals the bottom and sides, and cuts it off — then opens it, fills it and seals the top. No pouch magazine to refill and no pouches bought in.
Servo Film Advance
A servo pulls the film forward with enough torque for large pouches, and holds the pull even as the roll gets lighter. Pouch length is changed on the touchscreen.
Registration to Your Printed Film
A photocell reads the registration mark on your printed film and corrects the feed, so the artwork lands in the same place on every pouch.
Independent Zipper Unwind
On the zipper version, the zipper comes off its own reel with its own tension control and is sealed into the pouch as it forms — flat, without the puckering that comes from pulling it at the same tension as the film.
Two Filling Stations and a Vibrator
The dose goes in over two stations, with the pouch vibrated between them so powder settles before the second fill. A light powder that would otherwise overflow the pouch mouth has somewhere to go.
Heat Seal, Then Cooling Seal
The top is sealed by heated jaws, then pressed by cooling jaws before the pouch leaves the machine. Setting the seal while it’s still under pressure is what keeps it flat.
Technical specification
Parameter | APK-180S | What it means for you |
Pouch width | 90–180 mm | — |
Pouch length | 110–250 mm | Set on the touchscreen |
Pouch volume | 1,000 ml | Volume, not weight — grams depend on your powder |
Speed | 40–60 pouches/min | — |
Pouch types | Stand-up, shaped, hanging hole; zipper on the Z version | — |
Power | 9 kW | — |
Frequency / voltage | 60 Hz, built to your U.S. supply | We confirm the voltage with your quote |
Air | 300 NL/min | — |
Dimensions | 6,000 × 1,100 × 1,500 mm | 6 m of line |
Weight | 2,100 kg | — |
Model comparison
Model | Pouch width | Max fill | Speed | Power | Length |
APK-130S | 60–130 mm | 200 ml | 35–45/min | 6 kW | 4.5 m |
APK-180S | 90–180 mm | 1,000 ml | 40–60/min | 9 kW | 6.0 m |
APK-240S | 100–240 mm | 1,500 ml | 40–60/min | 11 kW | 8.7 m |
APK-280DS | 90–140 mm | 600 ml | 90–120/min | 15.5 kW | 10.1 m |
Every machine in this group makes the pouch from roll film. If you'd rather buy printed pouches, see our premade pouch machines — shorter, lower power, and a size change is an adjustment.
Industry Applications
Collagen and creatine stand-up pouches
Fine, free-flowing powders, one size run for weeks
Protein in 1 lb zipper pouches
The zipper made into the pouch rather than bought in
Greens and superfood blends
Light powders, where two filling stations and a vibrator keep the pouch mouth clean
Electrolyte and probiotic granules
Free-flowing granules on a volumetric cup
What changing over involves
What changed | What you adjust | Roughly |
Same pouch, new film roll | Splice the new roll | A few minutes |
Pouch length | Touchscreen setting | 15–30 minutes |
Pouch width | Change the forming set | 15–30 minutes |
Powder → granule | Dosing unit — auger to cup | 15–30 minutes |
A roll-film machine earns its keep running one size for a long time. If you change size weekly, that’s what premade pouch machines are for.
What to check before you buy
What a size change costs you
On a roll-film machine, find out what changes when your pouch width changes — a setting or a set of parts — and how long it takes. That's the number that decides whether buying film pays off.
Your film, not theirs
Every supplier's speed was measured on some film. Send yours and ask for the rate they held on it.
Installation and training
Ask what's included and what costs extra.
Why Buy From AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Run Your Film and Powder Before You Order
Send us your film spec and a sample of your powder. We form, fill and seal pouches from it and send them back. You decide whether to talk quotes after that.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
APK-180S Horizontal Doypack Sealing Machine FAQ
Yes. Powders go on a servo auger; free-flowing granules on a volumetric cup. Tell us your product and we’ll quote the right one.
Our multi-station sealing design applies controlled, uniform pressure and heat, and the filling stations are precisely synchronized to ensure the pouch opening remains clean before the sealing process begins.
Clean the filling stations and check the sealing jaws daily. Check the film path and the registration sensor weekly. Wear parts are listed in your quote, with the lead time for each.
Pouch length is a touchscreen setting. Pouch width means changing the forming set, which takes longer. If you change pouch size often, a premade pouch machine suits you better.
Yes, on the zipper version. The zipper comes off its own reel with its own tension control and is sealed in as the pouch forms.
Roll film if one size runs for long stretches and pouch cost matters. Premade pouches if you run several sizes. See premade pouch machines →
Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Customers Also Interested In...
Send Us Your Film Spec and a Powder Sample
Three things decide whether this machine pays off for you. Your pouch has to be 90 to 180 mm wide and hold up to 1,000 ml. You need 6 m of floor for the line. And you should be running one pouch size for long stretches — roll film costs less per bag than a premade pouch, but that saving only adds up when the size stays put.
Send us your film spec and a sample of your powder. We’ll form, fill and seal pouches from it and send them back, so you see the seal, the stand-up bottom and the fill weight on your own material before you order. If you run several sizes, we’ll tell you honestly that a premade pouch machine may suit you better.
- Reply within one business day
- Your film and powder run on the machine before you order
- Your formula and artwork stay with us
No sales calls — we reply by email or WhatsApp, whichever you gave us.