APK-180T Automatic Sachet Packaging Machine
Twin-link sachets — two pouches joined by a perforation, 120 to 160 a minute
A twice-daily supplement means two sachets. This machine makes them joined together, with a perforation down the middle, so the customer tears one off and keeps the other in the box. It’s the only model in our sachet range that does it — and because two pouches form side by side, it runs twice as fast as the single-output machines at a quarter of the fill.
1. Twin-link sachets: two pouches joined by a perforation, the only model in the range
2. Speed: 120 to 160 sachets a minute
3. Sachet size: 60 to 90 mm wide, 80 to 225 mm long
4. Fill volume: up to 100 ml
Is this the right machine for you?
✓ Yes, if…
- Your product is a twice-daily dose and you want both sachets in one pack
- Your fill is 100 ml or less per sachet
- You need 120 to 160 sachets a minute
- Your sachet is 60 to 90 mm wide
✕ Buy something else if…
- You want separate sachets, not joined ones → the APK-210D runs the same speed with a bigger fill, at 150 ml
- Your fill is over 100 ml → twin-link halves the width available to each pouch. The single-output APK-180 takes 400 ml, at half the speed
- You only run one dose a day → you're paying for a perforation you don't need
- Your product is a liquid or a cream → we build these machines for powders and granules
Technical specification
Parameter | APK-180T | What it means for you |
Pouch width | 60–90 mm | The narrowest in the range — two form side by side |
Pouch length | 80–225 mm | — |
Fill volume | 100 ml | Need more? The single-output APK-180 takes 400 ml at half the speed |
Speed | 120–160 sachets/min | Twice the single-output models |
Pouch types | 3-side seal, 4-side seal, twin-link | — |
Perforation | Rolling perforation wheel | Clean tear line without burr |
Power | 4.5 kW | — |
Frequency / voltage | 60 Hz, built to your U.S. supply | We confirm the voltage with your quote |
Air | 200 NL/min | — |
Dimensions | 3,900 × 970 × 1,450 mm | — |
Weight | 1,600 kg | — |
Model comparison
Model | Width | Fill | Speed | Format |
APK-110 | 50–110 mm | 60 ml | 60–80/min | 3 or 4-side |
APK-130 | 60–140 mm | 160 ml | 60–80/min | 3 or 4-side |
APK-180 | 60–180 mm | 400 ml | 60–80/min | 3 or 4-side |
APK-180T | 60–90 mm | 100 ml | 120–160/min | 3 or 4-side, twin-link |
APK-210D | 60–105 mm | 150 ml | 120–160/min | 3 or 4-side |
APK-240 | 70–120 mm | 180 ml | 100–160/min | 3 or 4-side |
Start with your fill volume. The twin-output models run twice as fast and hold roughly a quarter as much — two pouches share the width of the film.
Two sachets, one perforation
Two pouches form side by side and stay joined by a perforated line. The customer tears one off; the other stays sealed. For a twice-daily dose that’s one pack instead of two, and one carton instead of two.
Rolling perforation wheel
The tear line is made by a rolling wheel rather than a punch. It’s compact, easy to adjust, and leaves a clean edge. A ragged perforation is what makes a customer tear the wrong sachet open.
Half the fill, twice the speed
Two pouches share the width of the film, so each one is narrower and holds less: up to 100 ml at 120 to 160 a minute, against 400 ml at 60 to 80 on the APK-180.
Independent sealing station
The sealing station works independently of the filling station, so powder that’s still settling can’t get caught in the edge. That’s what a leaking sachet usually is.
Industry Applications
Twice-daily supplement doses
Two sachets joined, one torn off in the morning and one at night. The format this machine exists for.
AM/PM formula pairs
Two different powders in the two halves — an energy blend and a sleep blend, for instance.
Trial and sample packs
Two servings in one pack, handed out at a trade show or included with a first order.
Electrolyte and drink mix powders
Small fills at high speed. At 100 ml the twin-link format suits single-serve drink powders better than it suits protein.
What changing over involves
What changed | What you adjust | Roughly |
Same sachet, new film roll | Load the roll | A few minutes |
Sachet length changes | Setting on the machine | 15–30 minutes |
Sachet width changes within range | Forming set adjustment | 15–30 minutes |
3-side ↔ 4-side seal | Sealing configuration | 15–30 minutes |
Powder → granule | Change the dosing unit — auger to cup | 15–30 minutes |
What to check before you buy
Which dosing unit you're quoted
An auger meters powder by turns; a cup meters granules by volume. Ask which one is in your quote, and ask what it costs to add the other later if your product range changes.
Fill weight on your powder, not theirs
Every supplier's accuracy figure was measured on something. Ask them to run your sample and send you filled sachets with the weight spread.
Installation and training
Ask what's included and what costs extra.
Why Choose AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Run Your Powder Before You Order
Send us a sample and we fill it on the machine, then send you the sachets back with the fill weight spread. You decide whether to talk quotes after that.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
APK-180T Automatic Sachet Packaging Machine FAQ
Two pouches formed side by side and joined by a perforated line. The customer tears one off and the other stays sealed. For a twice-daily product that’s one pack instead of two, and one carton instead of two.
Almost everything except the platform. The 180 makes single sachets up to 400 ml at 60 to 80 a minute. The 180T makes joined pairs up to 100 ml at 120 to 160. Same frame, same footprint, different job.
Two pouches share the width of the film, so each one gets less than half. That’s arithmetic rather than a design compromise — if you need 400 ml, you need a single-output machine.
Yes. You can easily disable the twin-bag linking function. Once turned off, it operates as a standard high-speed dual-lane machine, cutting every single sachet individually.
Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Customers Also Interested In...
Send Us Your Powder
Two numbers narrow this down before anything else. How much goes in each sachet, and how many sachets a minute you need.
Twin-link is where those two pull against each other. Two pouches share the width of the film, so each one holds about a quarter of what a single sachet does — 100 ml here against 400 ml on the APK-180. If your fill is comfortably under 100 ml, you get double the speed for free. If it isn’t, no setting changes that, and we’d rather point you at the single-output machine.
Send us a sample of your powder and both numbers. We’ll run it and send you filled sachets back, so you see the fill weight spread and the tear line on your own product.
- Reply within one business day
- Your powder run on the machine before you order
- Your formula stays with us