APK-180 Automatic Sachet Packaging Machine

The largest fill in our sachet range — up to 400 ml

Four hundred milliliters is a big sachet. This is the machine for a full protein serving, a meal replacement portion, or anything where the sachet is the pack rather than a sample. Same platform and same speed as the smaller models — what changes is how much goes in.

1. Sachet size: 60 to 180 mm wide, 80 to 225 mm long

2. Fill volume: up to 400 ml, the largest in the range

3. Speed: 60 to 80 sachets a minute

4. Dosing: servo auger for powders, volumetric cup for granules

Is this the right machine for you?

✓ Yes, if…

✕ Buy something else if…

Technical specification

Parameter

APK-180

What it means for you

Pouch width

60–180 mm

The widest single-output sachet in the range

Pouch length

80–225 mm

—

Max filling capacity

400 ml

The largest fill we offer in a sachet

Packaging speed

60–80 sachets/min

No faster machine exists at this fill volume

Pouch types

3-side seal, 4-side seal

—

Dosing

Servo auger or volumetric cup

—

Power

4.5 kW

Larger platform than the APK-110 and 130

Frequency / voltage

60 Hz, built to your U.S. supply

We confirm the voltage with your quote

Air consumption

200 NL/min

Twice the smaller platform — check your compressor

Dimensions

3,900 × 970 × 1,450 mm

About a meter longer than the 110 and 130

Weight

1,600 kg

—

 

Model comparison

Model

Width

Fill

Speed

Format

APK-110

50–110 mm

60 ml

60–80/min

3 or 4-side

APK-130

60–140 mm

160 ml

60–80/min

3 or 4-side

APK-180

60–180 mm

400 ml

60–80/min

3 or 4-side

APK-180T

60–90 mm

100 ml

120–160/min

3 or 4-side, twin-link

APK-210D

60–105 mm

150 ml

120–160/min

3 or 4-side

APK-240

70–120 mm

180 ml

100–160/min

3 or 4-side

Start with your fill volume. The twin-output models run twice as fast and hold roughly a quarter as much — two pouches share the width of the film.

Maximum Format Versatility

Engineered to handle the widest sachet dimensions in our series, enabling manufacturers to consolidate multiple product lines into a single, high-efficiency workstation.

High-Volume Throughput Reliability

The reinforced drive system is designed to maintain consistent sealing accuracy and dosage precision even when operating under high-load, continuous duty cycles.

304 stainless steel frame

The frame is 304 stainless steel, built to be washed down between products.

Industry Applications

Full protein servings

A complete 30 to 50 g scoop in one sachet, not a sample portion.

Meal replacement and mass gainer

The fills that don’t fit any smaller machine in the range.

Bulk single-serves for gyms and sports teams

Larger portions handed out individually rather than sold on a shelf.

Multi-component supplement powders

Where several ingredients are blended and the serving is large.

What changing over involves

What changed

What you adjust

Roughly

Same sachet, new film roll

Load the roll

A few minutes

Sachet length changes

Setting on the machine

15–30 minutes

Sachet width changes within range

Forming set adjustment

15–30 minutes

3-side ↔ 4-side seal

Sealing configuration

15–30 minutes

Powder → granule

Change the dosing unit — auger to cup

15–30 minutes

What to check before you buy

01

Which dosing unit you're quoted

An auger meters powder by turns; a cup meters granules by volume. Ask which one is in your quote, and ask what it costs to add the other later if your product range changes.

02

Fill weight on your powder, not theirs

Every supplier's accuracy figure was measured on something. Ask them to run your sample and send you filled sachets with the weight spread.

03

Installation and training

Ask what's included and what costs extra.

Why Choose AIPAK?

One Point of Contact

One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.

We Run Your Powder Before You Order

Send us a sample and we fill it on the machine, then send you the sachets back with the fill weight spread. You decide whether to talk quotes after that.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

APK-180 Automatic Sachet Packaging Machine FAQ

How does the independent sealing device improve pouch quality compared to traditional systems?

On many sachet machines, powder still settling in the pouch gets caught in the seal as the jaws close, and that’s where a leak starts. Here the sealing station works on its own, separate from filling, so the edge is clear when it seals. Send us your powder and we’ll send back sealed sachets you can check.

What is the benefit of using "Lightweight Walking Beam" technology?

The carriage that moves the film is built light, so it starts and stops quickly with less wear on the drive. That’s what lets the machine hold 60 to 80 sachets a minute.

Can the APK-180 run both powders and granules?

Yes. Powders go on a servo auger; free-flowing granules on a volumetric cup. Both mount on the same frame. Tell us your product and we’ll quote the right dosing unit.

Is the system capable of switching between different sachet styles?

Yes. The APK-180 runs 3-side and 4-side seal sachets. Switching between them is a change to the sealing configuration, not a new set of tooling. We confirm how long it takes on your sachet.

Why does the biggest sachet run at the same speed as the smallest?

Because speed on the single-output machines is set by the sealing cycle, not by how much goes in the pouch. The 180 is built on a larger frame to take the wider film and the bigger dose, but the cycle is the same, so the speed is the same.

Is there a faster machine at 400 ml?

Not in this range. The twin-output models run 120 to 160 a minute, but two pouches share the film width, so the largest of them holds 180 ml. If you need 400 ml, 60 to 80 a minute is what’s available — we’d rather say that than quote you a number we can’t hold.

Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send Us Your Powder

Two numbers narrow this down before anything else: how much goes in each sachet, and how many sachets a minute you need. This machine takes up to 400 ml at 60 to 80 a minute. That’s the largest fill in our range, but not the fastest. If your fill or your speed sits outside that, we’ll point you at the model that fits rather than sell you this one.

Send us a sample of your powder and both numbers. We’ll run it and send you filled sachets back, so you see the fill weight spread on your own product.

  • Reply within one business day
  • Your powder run on the machine before you order
  • Your formula stays with us
Scroll to Top