APK-210Z Premade Zipper Pouch Filling Machine — Up to 1,200 ml
A dedicated station opens the zipper before the pouch is filled — 90 to 210 mm pouches, 40 to 60 a minute
A zipper pouch is harder to fill than it looks. If the zipper isn’t fully open when the powder drops, some of it lands on the track, and the pouch won’t reclose properly afterwards. This machine opens the zipper at its own station before the pouch reaches the filler, then fills and seals it. You buy the pouches printed from your supplier; the machine does the rest.
1. Zipper opening: a dedicated station opens the zipper before filling
2. Pouch size: 90 to 210 mm wide, 110 to 300 mm long
3. Fill: up to 1,200 ml
4. Speed: 40 to 60 pouches a minute
Is the APK-210Z the right size for you?
✓ Yes, if…
- Your pouches have a reclosable zipper
- You buy printed pouches from a pouch supplier
- Your pouch is 90 to 210 mm wide and holds up to 1,200 ml — 1 to 2 lb of most powders
- You run several pouch sizes and change between them
- You're packing a powder or a free-flowing granule
✕ Buy something else if…
- Your pouches don't have zippers → the APK-180S is smaller, faster and draws half the power
- Your pouch is over 210 mm wide or 1,200 ml → the APK-240 takes 1,500 ml on the same frame
- You're filling 5 lb zipper pouches of powder and want air pressed out before sealing → see our rotary premade machines, which have a degassing station
- You run one pouch size at high volume and pouch cost is a real line item → a roll-film doypack machine makes the pouch from film
- Your product is a liquid or a cream → we build these machines for powders and granules
Zipper Opened at Its Own Station
Suction cups hold the pouch while mechanical claws pull the zipper apart and spread the bottom gusset. The pouch reaches the filler already open. Opening a zipper and filling in the same motion is how powder ends up on the track and in the zipper itself.
Opened Before It's Filled
A sensor checks that each pouch has opened before the filler doses. If one hasn’t, the filler doesn’t fire for that cycle, so powder doesn’t end up on the machine.
Pouches from a Magazine, Not from Film
Printed pouches are stacked in a magazine and picked one at a time. The machine opens a pouch someone else made — which is why a size change is an adjustment, and why it’s shorter and lighter on power than a roll-film machine.
Two Filling Stations
The dose is split across two stations. Each drop is smaller, so a light powder settles between them instead of billowing up into an open zipper — and the second station can top up to the target weight.
Three-Stage Top Seal
The top seal is made across three pairs of heated jaws in sequence, then set by cooling jaws. Sealing across a zipper line is where wrinkles start; spreading the heat over three stages is how the machine avoids them.
Technical specification
Parameter | APK-210Z | What it means for you |
Pouch width | 90–210 mm | Easy pouch width adjustment with a simple handwheel |
Pouch length | 110–300 mm | — |
Max fill | 1,200 ml | Over that, see the APK-240 |
Speed | 40–60 pouches/min | — |
Pouch types | Zipper stand-up, stand-up, flat, shaped | — |
Zipper opening | Dedicated station | The reason to choose this machine over the APK-180S |
Power | 4.5 kW | — |
Frequency / voltage | 60 Hz, built to your U.S. supply | We confirm the voltage with your quote |
Air | 350 NL/min | — |
Dimensions | 3,200 × 980 × 1,400 mm | Narrower than a rotary machine |
Weight | 1,100 kg | — |
The APK-210Z and APK-240 share one frame — same power, air, footprint and weight. The difference is pouch size and fill: 210 mm and 1,200 ml here, 240 mm and 1,500 ml on the 240.
Model comparison
Model | Pouch width | Max fill | Speed | Power | Length |
APK-180S | 60–180 mm | 400 ml | 60–80/min | 2.3 kW | 2.25 m |
APK-180D | 60–180 mm | 400 ml | 120–160/min | 2.3 kW | 2.25 m |
APK-210Z | 90–210 mm | 1,200 ml | 40–60/min | 4.5 kW | 3.2 m |
APK-240S | 100–240 mm | 1,500 ml | 40–60/min | 4.5 kW | 3.2 m |
APK-280S | 90–140 mm | 800 ml | 90–120/min | 4.5 kW | 5.1 m |
Every machine in this group fills printed pouches you buy in. If you'd rather make the pouch from roll film, see our doypack machines — lower cost per bag, longer machine.
Production Applications
Protein and greens in zipper stand-up pouches
Resealable pouches the customer scoops from over a month. A zipper that won’t reclose is what drives the complaint.
Meal replacement blends
Larger multi-serve fills, up to 1,200 ml, in a pouch that has to reclose between servings.
Collagen and creatine
Fine, free-flowing powders in resealable pouches. A split dose keeps them from billowing into the zipper.
Electrolyte and probiotic granules
Free-flowing granules on a volumetric cup or multihead weigher rather than an auger.
What changing over involves
| What changed | What you adjust | Roughly |
| Same pouch, next batch | Reload the magazine | A few minutes |
| Pouch width | Gripper spacing on handwheels with a scale | 15–30 minutes |
| Pouch length | Guide height | 15–30 minutes |
| Powder → granule | Dosing unit — auger to cup | 15–30 minutes |
| Pouch with zipper → without zipper | Switch the zipper-opening station off | 15–30 minutes |
This is the reason to buy premade pouches rather than film: a size change is an adjustment on this machine, not a new set of forming parts.
What to check before you buy
What a size change actually takes
Ask any supplier how a pouch-width change is done — handwheels and a scale, or a new set of parts — and time it on their floor, not in their brochure.
Whether it opens zippers
Not every premade pouch machine does. If your pouches have a zipper, ask for the zipper-opening station by name.
Installation and training
Ask what's included and what costs extra.
Why Buy From AIPAK?
One Point of Contact
One project engineer handles your machine from proposal to commissioning, so you’re not chasing five suppliers for one answer.
We Run Your Pouch and Powder Before You Order
Send us a few empty pouches and a sample of your powder. We open, fill and seal them on the machine and send them back. You decide whether to talk quotes after that.
A U.S. Number, Answered by Us
+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.
Spare Parts and Lead Time, in Writing
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Product Technical FAQ for APK-210Z Series Premade Pouch Filling Machine
The APK-210Z Series uses two parallel filling stations to handle large-volume dosing. By distributing the filling process across two stations, the machine can maintain a stable production pace while supporting high-volume pouch filling. Specific filling performance and output for 1200 ml products are subject to product characteristics and final machine configuration.
A horizontal machine is narrower — under one meter wide compared with approximately 2.8 m for our rotary machines — making it a more compact choice for zipper pouches up to 210 mm. A rotary machine is better suited to larger zipper pouches of powder, where additional stations for degassing and rim sweeping can be more valuable than a compact machine footprint.
The top seal is made across three pairs of heated jaws in sequence, then set by cooling jaws. Spreading the heat over three stages is how the machine avoids wrinkles along the zipper line on heavier laminates. Send us a few of your pouches and we’ll seal them on the machine so you can check.
Suction cups hold the pouch walls while mechanical claws pull the zipper apart and spread the bottom gusset. The pouch is fully open before it reaches the filler.
A sensor at the opening station checks every pouch. If one is missing or hasn’t opened, the filler is blocked for that cycle, so no powder is dropped and nothing lands on the machine.
Pouch size and fill. They share one frame, so power, air, footprint and weight are the same. The 210Z takes pouches up to 210 mm wide and 1,200 ml; the 240 goes to 240 mm and 1,500 ml. If your pouch fits the 210Z, there’s no reason to pay for the bigger one.
Premade if you run several sizes, or if your zipper pouches come printed from a supplier you already use. Roll film brings the per-bag cost down, but the machine is longer, draws more power, and makes sense only when one size runs for long stretches.
Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.
A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.
Customers Also Interested In...
Send Us a Zipper Pouch and Your Powder
Two things decide whether this machine suits you. Your pouch has to be 90 to 210 mm wide and hold up to 1,200 ml. And the zipper has to open cleanly on the machine — some zipper profiles are stiffer than others, and the only way to know is to run yours.
Send us a few empty pouches and a powder sample. We’ll open, fill and seal them and send them back, so you can check the seal and the reclose on your own pouch before you order.
- Reply within one business day
- Your pouch and powder run on the machine before you order
- Your formula and artwork stay with us
No sales calls — we reply by email or WhatsApp, whichever you gave us.