YPJ-6 Vertical Automatic Capsule Pill Polishing Machine

Polish and Lift in One Machine

The YPJ-6 brushes powder off capsules or tablets as it carries them upward, then drops them into the hopper of the next machine, 800 to 1,100 mm up. If your filler discharges low and your counter or blister machine loads high, it does the polishing and the lifting in one footprint.

1. Lifts product 800 to 1,100 mm while polishing

2. Capsules #000 to #5, and tablets

3. Single-phase power, 70 kg, on casters

Direct from our factory | Lead time confirmed in your quote | Installation and training available | Spare parts listed in your quote

Polishes on the Way Up

A spiral nylon brush turns inside a perforated stainless steel tube and carries the product upward, brushing it as it climbs. Loose powder falls out through the mesh.

Feeds the Next Machine

The outlet sits 800 to 1,100 mm up, high enough to drop straight into the hopper of a counter or blister machine.

Capsules and Tablets

The same brush cleans filled capsules and compressed tablets. Brush speed is adjustable to suit the product.

Motor at the Top

The motor sits at the top of the column, away from where powder falls, so dust doesn’t reach the drive.

Technical specification

Technical Specifications

YPJ-6 Technical Specifications

OutputUp to 400,000 capsules/hour or 300,000 tablets/hour
ProductsCapsule sizes #000 to #5; compressed tablets
Lift height800 mm ~ 1100 mm
Motor0.37 kW
Vacuum2.8 m³/min
Compressed Air0.12 m³/min
Air Pressure0.3 ~ 0.5 MPa
Dimensions850 x 580 x 1350 mm
WeightApprox. 70 kg
PowerSingle-phase. Built to your local supply; we confirm the voltage and frequency with your quote

Why Choose AIPAK?

One Point of Contact

One engineer handles your machine from quote to commissioning, so you’re not chasing several people for one answer.

Send Us Your Capsules First

Post us a few hundred filled capsules. We run them through the polisher and send them back, so you see the finish on your own product before you order.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Industry Applications

Filler to Counter in One Step

Your filler discharges low and your counter loads high. The YPJ-6 polishes the capsules and lifts them into the counter’s hopper.

Tablet Lines

Tablets from the press, dedusted and lifted into the next machine.

Tight Floor Space

A vertical column takes less floor than a horizontal polisher plus a separate elevator.

YPJ-6 FAQ

Why choose a vertical polisher over a horizontal one?

A vertical polisher lifts the product while it polishes. If the next machine loads higher than your filler discharges, you don’t need a separate elevator.

Can it polish both capsules and tablets?

Yes. The same brush cleans filled capsules, sizes #000 to #5, and compressed tablets. Send us samples if your tablets have fragile edges or a coating.

How do the capsules climb without sliding back?

The spiral brush carries them upward inside the perforated tube. The brush speed is adjustable, so you can set it for your product.

How long does cleaning take?

The outer tube and the brush lift out without tools, so the column can be cleaned between products in a few minutes.

Do I need change parts for different capsule sizes?

No. The YPJ-6 runs sizes #000 to #5 without change parts.

What power and utilities does it need?

Single-phase power, 0.37 kW. We build to your local supply and confirm the voltage and frequency with your quote. It also needs a dust-collection vacuum at about 2.8 m³/min and compressed air at 0.3 to 0.5 MPa.

Why is the motor at the top?

Powder falls down through the mesh. With the motor at the top, it stays out of the drive.

Customers Also Interested In...

Send Us Your Capsules

Tell us your capsule sizes, how many capsules an hour your filler runs and what’s in them. An engineer replies within one business day with the polisher that fits.
  • Direct from our factory
  • Lead time confirmed in your quote
  • Installation and training available
  • Spare parts listed in your quote
Scroll to Top