WZH-600 High-Speed Intelligent Continuous Cartoning Machine

600 Cartons a Minute, with Format Changes Set on the Touchscreen

The WZH-600 is our full-servo cartoner at 600 cartons a minute. Every main mechanism is driven by its own servo, so changing product size is done by entering numbers on the touchscreen — there is no manual re-timing at all. It is the only machine in our range where a format change is a screen operation rather than a mechanical one.

1. Speed: 600 cartons per minute

2. Full servo: every main mechanism on its own servo, format changes set on screen

3. Formats: blisters, bottles, tubes, ALU strips, sachets

Is this the right machine for you?

✓ Yes, if…

✕ Buy something else if…

Every mechanism on its own servo

Each main mechanism is driven by one or two dedicated servos. Timing between them is electronic, not mechanical. That is what makes the next point possible.

Format change on the screen

You enter the new carton and product dimensions on the touchscreen and the machine re-times itself. There is no manual adjustment. On a plant running many SKUs, this is the difference between changeover being a job and being a step.

Leaflet up to 300 mm, 1 to 4 folds

The folder handles the full range at 600 cartons a minute.

Separated drive zone

The drive components sit behind the working area, not under it.

Technical specification

Parameter

Value

Model

WZH-600

Encasing Speed

600 cartons/min

Carton Size Range (L x W x H)

70-180 × 35-80 × 14-50 mm

Leaflet Material Quality

60 – 70 g/m²

Unfolded Leaflet Size (L x W)

80-300 × 90-180 mm

Working Air Pressure

0.6 MPa

Air Consumption

280–320 L/min

Power Supply

Three-phase, 60 Hz. Built to your U.S. supply; we confirm the voltage with your quote

Main Motor Power

15 kW

Machine Weight

5,500 kg

Dimensions

5,100 × 1,850 × 2,000 mm

Model comparison

Model

Speed

What it packs

Carton L×W×H (mm)

Leaflet unfolded

Power

WZH-120-III

30–120

Blister packs

70-180 × 35-85 × 14-50

80-250 × 90-180

Single-phase, 1.5 kW

WZH-120P

30–120

Bottles, with infeed unscrambling

70-180 × 35-85 × 14-50

80-250 × 90-180

Single-phase, 1.5 kW

WZH-120D

30–120

Sachets and pouches, 1–12 per carton

70-180 × 35-85 × 14-50

80-250 × 90-180

Three-phase, 4 kW

WZH-180

180

Blisters, tubes, trays, bottles, sachets

70-165 × 35-85 × 14-50

80-300 × 90-180

Three-phase, 4.5 kW

WZH-260

260

Blisters, tubes, trays, sachets

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5 kW

WZH-260P

260

Bottles, with infeed unscrambling

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5 kW

WZH-320

320

Blisters, bottles, tubes, sachets

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5.8 kW

WZH-450

450

Blisters, tubes, trays, sachets

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5 kW

WZH-600

600

Blisters, bottles, sachets · full servo

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 15 kW

Two things decide the model, and speed is only the second one.

What you pack comes first. Blisters, bottles and sachets each need a different feeder at the infeed. In the 120 series that is three separate machines. Above 120 the machines are more general, except the 260P, which is built for bottles.

Carton size is almost the same across the range. Every model takes a carton 70 to 180 mm long, except the WZH-180, which stops at 165 mm. Only the width narrows slightly above 180 cartons a minute, from 85 to 80 mm. So you do not lose carton flexibility by buying speed.

Industry Applications

High-SKU Supplement Plants

Many products and carton sizes on one line. Each format change is entered on the screen rather than set by hand.

Supplement Blister Lines

Downstream of a dual-lane or high-speed blister machine, two or three plates to a carton with a leaflet.

Bottles, Tubes and Sachets

Supplement bottles, ointment tubes and sachets on the same machine, with a change of feeder.

Changeover

Throughput sells machines. Changeover decides what you actually produce in a week.

What changed

What you adjust

Roughly

Same carton, new batch

Recipe on the screen

A few minutes

Carton length or width

Entered on the touchscreen; the servos re-time the machine

A few minutes

Carton or product height

The pusher head and pusher block must be swapped

15–30 minutes

Product format changes

The feeder at the infeed

15–30 minutes

Closing style (tuck-in → glue)

Not a changeover. That is a rebuild

—

Length and width are a screen setting. Height means changing the pusher. A different product means a different feeder. A different closing style means a different machine.

What to check before you buy

01

The five questions any supplier should ask you

What goes in the carton and how many. Carton dimensions and closing style. Leaflet format and whether it arrives folded. What feeds the machine upstream. Target speed. If a supplier quotes you without these, the machine that arrives will not fit the line it was bought for.

02

Carton sizing — where most projects go wrong

Manually packed cartons are usually a snug fit around the product. An automated pusher needs clearance. Send us both your product and carton dimensions. We will tell you before you order whether your existing carton runs, or needs modifying — rather than after it has been printed in quantity.

03

The documentation

Operating and maintenance manuals in English, electrical schematics, a spare parts list with part numbers and prices, and a signed FAT report before the machine ships. Ask any supplier to show you a sample manual page before you order.

Why Choose AIPAK?

One Point of Contact

You deal with us for the machine, the installation and the service call. Custom feeders, closing configurations and layout changes go through the engineers who build it.

Your Carton Checked Before You Order

Send us your carton and product dimensions. We tell you before you order whether your carton runs as it is or needs changing, not after it has been printed in quantity.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

WZH-600 Cartoning Machine FAQ

What does "full servo" actually change for me?

Changeover. On a mechanical machine, changing carton size means adjusting handwheels and re-timing mechanisms by hand. On this one you enter the dimensions on the screen and the servos re-time themselves. If you change carton size several times a week, that time adds up.

Will leaflets slip or tear at 600 a minute?

The leaflet folder runs on its own servo, timed electronically to the main drive. Holding fingers clamp the folded leaflet, and the pusher slides it into the carton together with the product while both are moving.

Can it put several blister plates in one carton?

Yes. You set the plate count on the touchscreen, for example 2, 3 or 4 plates per carton.

What happens if the machine jams?

Overload protection stops the machine, sounds an alarm and shows on the touchscreen where the fault is, so the operator goes straight to it.

Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send us your carton and your product

Carton dimensions and product dimensions together decide the machine. Send both and we will come back with a configuration, a layout drawing and a price. If a cartoner is not what you need yet, we will tell you that instead.

  • Direct from our factory

  • Lead time confirmed in your quote

  • Installation and training available

  • Spare parts listed in your quote

Scroll to Top